Robinhood RWE3CH9SS - User Manual
Robinhood RWE3CH9SS Range Hood – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Ducting Options; Duct mounting option; 634 and
- Page 4 – continued; Minimum; height from the hob surface to the underside face of the rangehood; Any installation above 750mm will compromise performance.; Distance between mounting screw holes on Fixing Plate
- Page 5 – Installation; Only if ducting
- Page 6 – Recirculation mode; Remove any plastic coating from the product.
- Page 7 – Switch off the canopy before cleaning or maintenance.; To prevent surface damage never use abrasive; Note - some discolouration of the frame may occur if washed in the; Charcoal filter 2536 (2 pack - 600 Model)
- Page 8 – Product approvals and ratings; Product approval number; Important safety information; appliances burning gas or other fuels.
- Page 10 – Australia
1
Description:
ROBINHOOD WALL CANOPY
Model Numbers:
RWH3CH6SS, RWH3CH9SS
Model pictured:
RWH3CH6SS
RWH
Issue: A
All dimensions in mm
Model may vary slightly from images pictured
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3 Pre-Installation - continued Ducting Options The method of ducting should be carefully considered before installing the rangehood. The guide below recommends the ducting components to use for all common ducting configurations - through the top of the home (for the roof and soffit) and through the ...
4 Pre-Installation - continued Installation position A Minimum height from the hob surface to the underside face of the rangehood 600mm electric hob 650mm gas hob Notes: If the instructions for the gas hob specify a greater distance, this has to be taken into account. Any installation above 750mm wi...
5 Installation Mounting to a stud is recommended. However, if fitted to other wall linings (plasterboard, concrete etc) suitable fixings will be required. Before drilling any holes check that the wall and ceiling are clear of any electrical cables, pipes etc. 1. Pre drill pilot holes in the position...
