Robinhood HIC604TFG - User Manual

3 Installation Built-in induction cooktop cutout dimensions Cut out the work surface according to the sizes shown in the image below. Ensure that there is a minimum of 50mm of space around the cutout. The thickness of the bench should be at least 30mm. Please select heat-resistant and insulated benc...

4 Installation Note: There are ventilation holes around outside of the cooktop. Ensure that these holes are not blocked by the bench when you install the cooktop. Be aware that any glue used on the bench must be resistant to a minimum temperature of 150°C. The rear wall, adjacent and surrounding sur...

5 Appliance details General Information Before installing and operating the cooktop, carefully read the following important information regarding installation safety and maintenance. Keep this information booklet accessible for further consultations. Specifications Model HIC604TFG Cooking Zones 4 Zo...

6 Electrical connection LOCAL AUTHORITY REQUIREMENTS Installation is only permitted by a licensed electrician and carried out according to instructions provided by the manufacturer. Incorrect installation might cause harm and damage, for which the manufacturer accepts no responsibility. Electrical I...

7 Operating Instructions Touch Controls • The controls respond to touch, so you do not need to apply any pressure. • Use the pad of your finger, not the tip. • You will hear a beep each time a touch is registered. • Make sure the controls are always clean, dry, and that there are no objects (e.g., a...

8 Operating Instructions Using the Cooktop When the power is connected you will hear a beep and all the lights will come on for one second and then go out. This indicates that the cooktop has entered standby mode. Turn the cooktop on by touching the On / Off control. All indicators will show “ - “. ...

9 Operating Instructions Safety Lock The controls can be locked to prevent accidental use and to protect children. When the controls are locked, all buttons except for the On/Off button are disabled. To lock the controls, press the lock button. The timer indicator will display “Lo”. To unlock the co...

10 Operating Instructions Setting the Timer to turn one or more Cooking Zones Off Touch the “+” or “ - “ control of the cooking zone you wish to set the timer for. Set the timer as described on the previous page. A red dot next to the power level for the corresponding cooking zone will illuminate to...

11 Cleaning and Maintenance Cleaning Problem Resolution Important Everyday soiling on glass (fingerprints, marks, stains left by food or non-sugary spillovers on the glass) 1. Switch the power to the cooktop off. 2. Apply a cooktop cleaner while the glass is still warm (but not hot!) 3. Rinse and wi...

12 Cleaning and Maintenance Troubleshooting Problem Possible causes What to do The cooktop cannot be turned on. No power. Make sure the cooktop is connected to the power supply and that it is switched on. Check whether there is a power outage in your home or area. If you’ve checked everything and th...