Robertshaw 9401 - Manual
Robertshaw 9401 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – IMPORTANT SAFETY INFORMATION; Step 1: Replacing Existing Thermostat; Old Terminal; Figure 1
- Page 3 – NOTE: FOR NEW INSTALLATIONS, MOUNT THERMOSTAT ON; Turn power off to the heating and cooling systems.; TM
- Page 4 – Wiring Diagrams; Figure 4; R h R c; Figure 5
- Page 6 – Figure 6; TERM
- Page 7 – Step 3: Testing the Thermostat; CAUTION: DO NOT SWITCH SYSTEM TO COOL IF THE TEMPERATURE
- Page 8 – System; Figure 7
- Page 10 – Step 5: Troubleshooting; Symptom; Thermostat does not turn on system.; Installation; If problems with thermostat cannot be resolved, call:; Changing the Temperature
- Page 11 – Two Year Limited Warranty; warrants to the original contractor installer, or to; Climate Controls NA; recommendations and instructions.; Climate Controls NA; agrees to repair or replace at its option any; Climate Controls NA; shall not be liable for; Invensys Climate Controls NA; Warranty Claims Department
- Page 12 – NOTES
Application
The Robertshaw 9401 is a single-stage thermostat designed to control
24 VAC gas or electric heating and cooling systems or single-stage heat
pump. The 9401 requires the use of a common wire.
Features
• Summer and winter setpoints
• Large back lit display
• Adjustable temperature differential: .5°F to 3.0°F (0.5°C to 1.5°C)
• Compressor short cycle protection
• Accuracy within ±1°
• Zone system compatible as a master thermostat
• Permanent memory retention
• Fahrenheit/Celsius display option
• Adjustable from 45°F to 90°F (7°C - 32°C)
• Quick wire terminal block
• Automatic heating shutdown if temperature exceeds 94°F (34°C)
1
D I G I TA L
N O N - P R O G R A M M A B L E
T H E R M O S TAT
9401
E L E C T R I C
E
G A S
G
O I L
O
®
NeW
1 Heat / 1 Cool
User's Manual
Quick Start
Installation
110-1041
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
IMPORTANT SAFETY INFORMATION WARNING: • Always turn off power at main fuse or circuit breaker panel before installing, removing, cleaning, or servicing thermostat. • Read all the information in this manual before installing this thermostat. • This is a 24 VAC low-voltage thermostat. Do not install o...
Recycling Thermostat If this thermostat is replacing a thermostat that contains mercuryin a sealed tube, do not place your old thermostat in the garbage.Contact your local waste management authority for instructionsregarding proper disposal of the thermostat. If you have any ques-tions, call Roberts...
5. Place thermostat against the wall at desired location. Make sure wires will feed through opening (Figure 4) on base of thermostat. 6. Mark placement of mounting holes (Figure 4). Set base aside. 7. If mounting on drywall, tap plastic anchors into wall. NOTE: ENCLOSED PLASTIC ANCHORS DO NOT REQUIR...
