Page 2 - Contents
Controls ........................................................................... 2-3Using the clock radio for the first time .................................4Operating your clock radio ..................................................5Selecting a station - DAB .....................................
Page 5 - Using the clock radio for the first time
4 Using the clock radio for the first time 1. Place your clock radio on a flat surface. 2. Fully extend the wire aerial located on the rear of your clock radio. Place the wire antenna so that it is as straight as possible extending either above or below the radio. 3. Insert the adaptor plug into the D...
Page 6 - Operating your clock radio; On / Standby button
5 Operating your clock radio 1. Press the On / Standby button to switch on your clock radio. The display will show "TUNING" for a few seconds. When first switched on, the radio will be in DAB mode. After each use the radio will remember the mode used and then switch on in that mode the next t...
Page 7 - Selecting a station - DAB
6 Selecting a station - DAB 1. Press the On / Standby button to switch on your clock radio. The display will show "TUNING" for a few seconds. 2. Press the Band button to select DAB mode. The display will show the name of the radio station currently selected. 3. Press the Tuning Up or Down bu...
Page 8 - Info button; Secondary services - DAB; Tuning Up button
7 1 Display modes - DAB Your radio has a range of display options when in DAB mode. Note that the display will revert to a conventional time display 10 seconds after the last button press except when displaying scrolling text. 1. Press the Info button to cycle through the various options. a. Station...
Page 10 - Finding new stations - DAB; hold; Auto Tune button
9 Finding new stations - DAB From time to time, new DAB radio stations may become available. Or you may have moved to a different part of the country. In this case you may need to cause your radio to scan for new stations. 1. With the radio switched on and in DAB mode press and release the Auto-Tune...
Page 16 - Presetting stations; Preset button; Recalling a preset station; Band button
15 Presetting stations You may store your preferred DAB and FM radio stations to the preset station memories. There are 10 memory presets in your radio, 5 for DAB and 5 for FM. Presets are remembered by your radio in the event of a power failure. The procedure for setting presets and using them to t...
Page 17 - Clock display; the current time. The date can be displayed by pressing the; Display Dimmer; for about 10 seconds and it will then revert to a lower level.; Display Backlight
16 Clock display 1. When your clock radio is in standby mode, the display normally shows the current time. The date can be displayed by pressing the Info button . After 10 seconds the display will return to showing the current time. 1 Display Dimmer Your clock radio has an adjustable dimmer control ...
Page 18 - Setting the alarm times
17 Setting the alarm times Your clock radio has two alarms which can be set to wake you to either radio or buzzer alarm. Each alarm can be set to sound once, daily, on weekdays or at weekends. The alarms can only be set when your clock radio is switched on and in DAB or FM mode. Note: If no buttons ...
Page 21 - Alarm button
20 Cancelling alarms 1. While an alarm is sounding it can be cancelled by pressing the On / Standby button . 1 2 To view the alarm settings 1. Press the On / Standby button to switch on the clock radio. 2. Press the Alarm button to enter the alarm setup. 3. Press the Select button , then press the T...
Page 23 - Sleep timer
22 Sleep timer Your clock radio can be set to turn off after a preset time has elapsed. The sleep setting can be adjusted between 5 and 90 minutes in 5 minute increments. Ensure your clock radio is switched On. 1. To set the desired sleep time, press and release the Alarm button to enter the setting...
Page 24 - Setting the clock manually
23 TUNING SNOOZE down up Setting the clock manually Normally your clock radio will set its clock automatically via the DAB signal. If no DAB signal is available and you need to set the time manually, please follow the procedure shown below.Note: The DAB signal will always override any manual time se...
Page 26 - To return to auto clock set mode; to switch on the clock radio. Press
25 7,9,11 To return to auto clock set mode 1. Press the On / Standby button to switch on the clock radio. Press the Alarm button to enter the settings menu. "SET ALM" will appear on the display. 2. Press the Tuning Up or Down button until "AUTO CLK" appears on the display. Press and ...
Page 27 - Auxiliary input socket; Auxiliary Input socket
26 Auxiliary input socket 1. A 3.5mm stereo Auxiliary Input socket is provided on the right hand side of your clock radio to permit an audio signal to be fed into the unit from an external audio device such as iPod, MP3 or CD player. Connecting to this socket will override the radio functions 2. Adj...
Page 28 - Line out socket; Headphone socket; Headphone Socket
27 Line out socket A 3.5mm Line out socket located on the right hand side of your clock radio is provided for connecting the audio signal to an external amplifier. Inserting a plug into the line output socket will not mute the internal loudspeaker. Line Out Aux In VOLUME Headphone socket A 3.5mm Head...
Page 29 - Software version; Ensure your clock radio is switched to the On position.
28 Software version The software display cannot be altered and is just for your reference. Ensure your clock radio is switched to the On position. 1. Press and hold the Info button the display will show "MANUAL". 2. Press the Tuning Up or Down buttons until the display shows your clock radio...
Page 30 - System reset; Info button
29 System reset If your radio fails to operate correctly, or some digits on the display are missing or incomplete carry out the following procedure. 1. Switch on your radio. 2. Press and hold in the Info button until "MANUAL" appears on the display. 3. Press the Tuning Up or Down button unti...
Page 31 - Cautions
30 Cautions Do not allow this clock radio to be exposed to water, steam or sand. Do not leave your clock radio where excessive heat could cause damage such as in a parked car where the heat from the sun can build up even though the outside temperature may not seem too high. • The name plate is locat...
Page 32 - Power Requirements
The Company reserves the right to amend the specification without notice. Circuit Features Loudspeaker 1 x 75mm Output Power 0.6 Watt Headphone socket 3.5mm dia Auxiliary Input socket 3.5mm dia Line out socket 3.5mm dia Aerial System FM Wire aerial DAB Wire aerial Specifications Power Requirements Mai...
Page 33 - Notes
32 Notes ......................................................................................................................................................................................................................................................................................................
Page 35 - Guarantee; Receivers with removed or defaced serial numbers.
Guarantee This instrument is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty workmanship or component breakdown, subject to the procedure stated below. Should any component or part fail during this guarantee period it will be repaired or rep...
Page 36 - ROBERTS RADIO TECHNICAL SERVICES; Isleworth; © 2008 Roberts Radio Limited; Issue 1
ROBERTS RADIO TECHNICAL SERVICES 97-99 Worton Road Isleworth Middlesex TW7 6EG Technical Helpline :- 020 8758 0338 (Mon-Fri during office hours) Website: http://www.robertsradio.co.uk © 2008 Roberts Radio Limited Issue 1
