ROBERTS CRD-51 - Manuals

5 Operating your clock radio - DAB 1. Press the On/off button to switch on your clock radio. The display will show "TUNING" for a few seconds. 2. If your clock radio has been used before, the last used station will be selected. 3. The first station in the list of stations found will be playe...

If.you.need.any.further.advice,.please.call.our.Technical.Helpline.on.:- 020 8758 0338 (Mon-Fri) 6 Selecting a station – DAB 1. The display shows the name of the station currently selected. 2. Press the Tuning up or down buttons to step through the list of available stations. 3. When the desired sta...

Display modes - DAB Your radio has seven display modes:- 1. Press the Display button to cycle through the various modes. a. Scrolling text Displays scrolling text messages such as artist/track name, phone in number, etc. b. Programme type Displays type of station being listened to e.g. Pop, Classic,...

If.you.need.any.further.advice,.please.call.our.Technical.Helpline.on.:- 020 8758 0338 (Mon-Fri) 8 Finding new stations - DAB autoscan As time passes new stations may become available. To find new stations proceed as follows:- 1. Press and hold down the Menu/Display button until the display shows &#...

11 Operating your radio – FM autotune 1. Fully extend the wire aerial located on the rear of your clock radio. Place the wire antenna so that it is as straight as possible extending either above or below the radio. 2. Press the On/Off button to switch on your radio. 3. Press the FM/DAB button to sel...

If.you.need.any.further.advice,.please.call.our.Technical.Helpline.on.:- 020 8758 0338 (Mon-Fri) 12 Operating your radio – FM manual tune 1. Fully extend the wire aerial located on the rear of your clock radio. Place the wire antenna so that it is as straight as possible extending either above or be...

13 Display modes – FM Your radio has four display modes for FM listening:-The Radio Data System (RDS) is a system in which inaudible digital information is transmitted in addition to the normal FM radio programme. RDS offers several useful features. The following are available on your clock radio:- ...

If.you.need.any.further.advice,.please.call.our.Technical.Helpline.on.:- 020 8758 0338 (Mon-Fri) 14 Presetting stations There are 20 memory presets, 10 for DAB and 10 for FM. 1. Press the On/Off button to switch on the radio. 2. Press the FM/DAB button to select the desired waveband. 3. Tune to the ...

15 Recalling a preset station 1. Press the On/Off button to switch on the radio. 2. Press the FM/DAB button to select the desired waveband. 3. Press the Preset button . 4. Press the Tuning Up or down buttons to select the desired preset station. 5. Press the Select button . Your clock radio will tun...

If.you.need.any.further.advice,.please.call.our.Technical.Helpline.on.:- 020 8758 0338 (Mon-Fri) 16 Setting alarm times Your clock radio has two alarms which can be set to wake you to either radio or beep type alarm. Each alarm can be set to sound once, daily, weekdays and weekends. The alarms only ...

If.you.need.any.further.advice,.please.call.our.Technical.Helpline.on.:- 020 8758 0338 (Mon-Fri) 18 Setting alarm times - cont. 15. Press the Tuning up or down buttons to select the correct year 16. Press the Select button to enter the alarm month option 17. Press the Tuning up or down buttons to se...

To view alarm time 1. Press the Alarm button to enter the alarm setup. 2. Press the Select button , then press the Tuning up or down buttons to view alarms 1 or 2. 3. Press the Select button to cycle through the various settings for the chosen alarm. 19 2 2 2,3 1 Cancelling alarms 1. Whilst an alarm...

Sleep function Your clock radio can be set to turn off after a preset time has elapsed. The sleep setting can be adjusted between 5 and 90 minutes in 5 minute increments. 1. To set the desired sleep time, press the Sleep button to enter the sleep setup. 2. Press the Tuning up or down buttons to adju...

If.you.need.any.further.advice,.please.call.our.Technical.Helpline.on.:- 020 8758 0338 (Mon-Fri) 22 Setting the clock Normally your clock radio will set its clock automatically via the DAB signal. If no DAB signal is available and you need to set the time manually, please follow the procedure shown ...

23 Setting the clock cont. 10. Press the Select button to enter the set month option. 11. Press the Tuning up or down buttons to select the correct month. 12. Press the Select button to confirm time settings and return to normal radio mode. To return to Auto clock set mode 1. Press and hold down the...

Dimmer 1. In order to adapt the intensity of the display to suit the ambient room lighting, press Dimmer button on the top of your clock radio to select the dimmer brightness from High-Mid-Low and Off. Display Backlight 1. In order to view the display when the display backlight is set to off, you ca...

25 Headphone socket A 3.5mm Headphone socket located on the left side of your clock radio is provided for use with either headphones or an earpiece. Inserting a plug automatically mutes the internal loudspeaker. Important: Excessive sound pressure from the earphones or headphones can cause hearing l...

If.you.need.any.further.advice,.please.call.our.Technical.Helpline.on.:- 020 8758 0338 (Mon-Fri) Factory Reset If your radio fails to operate correctly, or some digits on the display are missing or incomplete, carry out the following procedure. 1. Press and hold down the Menu/Display button for 2 se...

1 Software Version This is provided as a reference when servicing is required. 1. Press the On/Off button to turn on the radio. 2. Press and hold the Menu/Display button . 3. Press the Tuning up or down button . until the software version of the unit appears on the display. 2 2 1 27

If.you.need.any.further.advice,.please.call.our.Technical.Helpline.on.:- 020 8758 0338 (Mon-Fri) General Do not allow your clock radio to be exposed to water, steam or sand. Do not leave your radio where excessive heat could cause damage such as in a parked car where the heat from the sun can build ...

The wire coloured BLUE must be connected to the terminal marked N or coloured BLACK.The wire coloured BROWN must be connected to the terminal marked L or coloured RED. Mains supply The CRD51 will operate from a supply of AC 230 volts, 50Hz only. DO NOT cut off the mains plug from this equipment. If ...

If.you.need.any.further.advice,.please.call.our.Technical.Helpline.on.:- 020 8758 0338 (Mon-Fri) Guarantee This instrument is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty workmanship or component breakdown, subject to the procedure stated...

ROBERTS RADIO TECHNICAL SERVICES 97-99 Worton Road Isleworth Middlesex TW7 6EG Technical Helpline :- 020 8758 0338 (Mon-Fri during office hours) Website:.http://www.robertsradio.co.uk Issue.1