ROBERTS CR2002 - Manuals

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 6 Automatic clock setting 1. Place your radio on a flat surface and connect the mains plug to a wall socket and switch on the wall socket. Your clock radio will display -:-- and the MSF indicator will fl...

7 Automatic clock setting 5. After approximately 3 minutes your clock radio will synchronise to the official UK standard time signal transmitter (MSF) located at Rugbyin the U.K. The MSF indicator will stop flashing and the correct time and date will appear in the display. Once synchronisedto the ra...

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 8 Manual clock setting (only if automatic setting fails) 1. Press the Time button , display will flash . 2. Press the Set button , the hour digits will flash in the display. 3. Press the up or down butto...

9 Setting the date (only if automatic setting fails) 1. Press the Date button , DATE will flash in the LCD display. 2. Press the Set button , Year will flash in the LCD display. 3. Press the up or down button to adjust the year. 4. Press the Set button , Month will flash in the LCD display. 5. Press...

11 Manual tuning 1. Press the On/Off button to switch on your radio. 2. Select the required waveband by repeatedly pressing the Band button . On the FM waveband fully extend the Wire aerial located on the rear of your clock radio - for MW and LW rotate your clock radiofor best reception. 3. A single...

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 12 Presetting stations There are 7 memory presets for each of the 3 wavebands. 1. Press the On/Off button to switch on the radio. 2. Tune to the required station using one of the methods previously descr...

13 Recalling a preset station 1. Press the On/Off button to turn on the radio. 2. Select the required waveband by repeatedly pressing the Band button. 3. Momentarily press the required Preset button , the preset number and station frequency will appear in the display. 3 1 2

15 Setting alarms to wake to radio (continued) 6. Press the Day of week buttons to select required days of week on which the alarm will sound. Display will shows day of week on whichalarm will sound e.g. 7. Repeatedly press and release Mode button until the radio alarm symbol or appears in the displ...

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 16 Setting alarms to wake to buzzer A beep tone will sound when using the buzzer alarm. The alarm beep willincrease in volume every 15 seconds for one minute followed by oneminutes silence before repeati...

17 1 1 Setting alarms to wake to buzzer (continued) 6. Press the Day of week buttons to select required days of week on which the alarm will sound. Display will shows day of week on whichalarm will sound e.g. 7. Repeatedly press and release Mode button until the buzzer alarm symbol or appears in the...

19 Display button 1. When the radio is switched on you can change between station frequency and normal time display by pressing the Display button . 1 Display back light 1. The display backlight can be switched on or off by pressing the button . 1 Sleep timer The sleep timer will automatically switc...

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 20 Time zone switch The Time zone switch is used to provide offsets of -1 to + 2 hours relative to GMT (UTC). This facility would only be used if your clock radio is used in anothercountry that is within...

21 Specifications Power Requirements Mains AC 230 volts, 50Hz only Frequency Coverage FM 87.5-108MHz MW 522- 1629kHz LW 153- 279kHz Loudspeaker 75mm x 100mm 8ohms Output Power 800 mW Headphone socket 3.5mm dia Aerial System FM Wire aerial MW Built-in Ferrite aerial LW Built-in Ferrite aerial Trouble...

Issue 1 ROBERTS RADIO TECHNICAL SERVICES 97-99 Worton Road Isleworth Middlesex TW7 6EG Technical Helpline :- 020 8758 0338 (Mon-Fri during office hours) Guarantee This instrument is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty workmanship...