Ring B071DZYTKY - User Manual

Page 2 - Welcome

Welcome Congratulations on your new Ring Video Doorbell Elite. Ring Doorbell is the foundation of the Ring of Security around your home. We hope your Ring Doorbell brings you an increased sense of security and convenience, as well as the joy that comes from being able to connect with visitors when y...

Page 3 - Before you begin; Check out all the stuff in the box.

Elite Power Kit Includes power adapter and plugs for different types of outlets. 3’ Ethernet Cable Use this cable to connect the Elite Power Kit to your internet access point. 50’ Ethernet Cable Run this cable from the Elite Power Kit to your Ring Doorbell. Elite Mounting Bracket (optional) If insta...

Page 5 - How it all fits together

How it all fits together If you need a visual overview, see the diagram to the right . This is how is all fits together. Note that as you screw the Elite Mounting Bracket into your wall, the “wings” will rotate and lock the bracket into place. 9 8

Page 6 - Mark the install location

57mm 95mm Mark the install location If you already have a junction box at the location where you’re installing your Ring Elite, skip the next couple of steps and screw it directly into that junction box. If you don’t have a junction box, trace the outline of the supplied template, then cut a rectang...

Page 7 - Install the Elite Mounting Bracket

Install the Elite Mounting Bracket Make sure any wires in your wall come through the bracket , and screw it in using the two screws in the corners. The wing clamps will rotate as the screws turn and lock the bracket into your wall. 13 12

Page 8 - Plug in the ethernet cable

Plug in the ethernet cable Plug the ethernet cable coming out of your wall into the ethernet port on the back of Ring Elite. As long as this cable is connected to power, the front light on Ring Elite will begin spinning and it will begin talking to you to let you know that it is ready to be set up i...

Page 10 - Screw Ring Elite into the bracket

Screw Ring Elite into the bracket Using two of the provided screws, screw Ring Elite into the bracket to secure it on your wall. 19 18

Page 11 - Perform the in-app setup

Perform the in-app setup In the Ring app, select Set Up a Device, and follow the in-app instructions to connect Ring Elite to your Wi-Fi network. When prompted, select ethernet as your connection method. 9:41 AM Set Up a Device Cancel ALL DOORBELLS CAMER AS Ring Video Doorbell Ring Video Doorbell Pr...

Page 12 - Secure the faceplate

Secure the faceplate After completing the in-app setup, place one of the provided faceplates on your Ring Elite. Then use one of the provided security screws and the flexible screwdriver bit to lock it into place. 23 22

Page 13 - After setting up Ring Elite in the app,

Shared Users Select Shared Users to let family or friends answer live events and view recordings (if recording is enabled). Motion Settings Select Motion Settings to enable and customize your motion detection settings. Device Health If you ever run into a problem with your Ring Doorbell, visit Devic...

Page 15 - If none of the above; I’m having trouble; Ethernet Setup

Left Flashing White indicates a possible issue with your internet connection. Unplug your modem / router for 40 seconds, plug it back in and then repeat setup. Spinning White indicates that your Ring Doorbell is in setup mode. You’ll need to follow the instructions in the Ring app. When prompted, co...

Ring B071DZYTKY - User Manual

Table of Contents:

Summary

Other Ring Security Systems Models