Ring 5AT1S7-WEN0 - User Manual
Ring 5AT1S7-WEN0 Video Doorbell – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Slide off the; Slide the tabs out of the; Remove the battery; Press in the tab on the bottom
- Page 4 – Once removed, the included
- Page 5 – Charge your Steplight.
- Page 6 – Set up your Steplight; When prompted, select
- Page 7 – Mark the screw holes.; Use the holes in the mounting
- Page 8 – Install Wall Anchors; If installing on a hard surface
- Page 9 – Install the
- Page 10 – Mount your Steplight.; Place your Steplight over the
Solar
Steplight
Smart Lighting
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Slide off the mounting plate. Slide the tabs out of the grooves and remove the plate from the rear of your Steplight. Remove the battery cover. Press in the tab on the bottom and lift to remove. 5 4
Remove the battery pull-tab. Once removed, the included lithium-ion battery will be activated and your Steplight will flash twice to indicate its powered on. Risk of fire, explosion, or burn. Do not short circuit, crush, heat above 60°C, incinerate, or disassemble the battery. 7 6
Charge your Steplight. Plug the provided micro USB cord into a USB power supply (not included), then connect it to your Steplight to fully charge the battery. The light will slowly turn on and off while charging and glow on continuously once charged. Once charged, remove the micro USB cord. If you c...
