Page 2 - Pixi
i Contents / Inhalt / Contenu / Dotazione / Innehåll / Indhold / Innhold / Sisältö 1 4 8 12 11 Pixi ™ pediatric mask
Page 3 - ii
ii Mask components / Maskenkomponenten / Composants du masque / Componenti della maschera / Maskkomponenter / Maskedele / Maskens komponenter / Maskin osat 13 14 15 1 3 2 11 4 6 7 8 9 10 5 16 18 12 A 17
Page 4 - iii
iii Mask components / Maskenkomponenten / Composants du masque / Componenti della maschera / Maskkomponenter / Maskedele / Maskens komponenter / Maskin osat Item / Artikel / Composant / Elemento / Artikel / Del / Artikkel / Osa Description / Beschreibung / Description / Descrizione / Beskrivning / B...
Page 5 - iv
iv Item / Artikel / Composant / Elemento / Artikel / Del / Artikkel / Osa Description / Beschreibung / Description / Descrizione / Beskrivning / Beskrivelse / Beskrivelse / Nimitys Part number / Teilenummer / Code produit / Codice prodotto / Artikelnummer / Delnummer / Delenummer / Tuotenumero 5. Fr...
Page 7 - English; Intended use; The mask may not be suitable for those predisposed to aspiration.
1 English Pixi ™ pediatric mask Thank you for choosing the Pixi Pediatric mask. Please read the entire manual before use. Intended use The Pixi Pediatric mask channels airflow noninvasively to a patient from a continuous positive airway pressure (CPAP) or bilevel device (‘device’).The Pixi Pediatric...
Page 8 - Set up; If the child has a preference for sleeping on a particular; Changing the side of the air tubing
2 Explanation: CPAP and bilevel devices are intended to be used with special masks (or connectors) which have vent holes to allow continuous flow of air out of the mask. When the device is turned on and functioning properly, new air from the device flushes the exhaled air out through the mask vent h...
Page 10 - If fitting the mask for the first time, we recommend the child be; Fitting steps
4 WARNING • Ensure that the nasal cushion does not block the nostrils at any time during fitting or use. • Do not leave long lengths of air tubing around the top of the child’s bed. It could twist around the child’s head or neck while sleeping. Fitting The fitting illustrations show the sequence for...
Page 11 - Fitting
Page 12 - Adjustment; bottom strap and working upwards.; Adjustment steps; If necessary, adjust the straps by removing the Velcro and gently
6 Adjustment Pixi Hints! • To achieve optimal seal, adjust the headgear straps starting at the bottom strap and working upwards. • If the child experiences nasal dryness or irritation, using a humidifier is recommended. Adjustment steps 1. If necessary, adjust the straps by removing the Velcro and g...
Page 13 - Attaching the pressure port; Attachment steps; Remove the plug from the cushion.
7 English Attaching the pressure port The pressure port is used to measure the air pressure at your mask so that the correct pressure is set. This happens during the sleep study at the hospital. The pressure port is also used to deliver oxygen. This can take place in the home or hospital environment...
Page 14 - Cushion check; Cushion check steps; –2. Ensure the cushion is not creased or folded or caught inside the
8 Cushion check Cushion check steps 1–2. Ensure the cushion is not creased or folded or caught inside the sockets of the mask frame. 3. The Pixi cushion is designed to sit mid-bridge. Ensure that the mask does not block the nose or mouth at any time. 1 2 3
Page 15 - Removal; Removal steps; –4. Keep holding the mask and remove the headgear by pulling up and
9 English Removal Removal steps 1–2. Gently hold the mask against the child’s face. Unhook the quick release clip from the lower headgear arm by pulling forward and away from the arm. 3–4. Keep holding the mask and remove the headgear by pulling up and over the head towards the face. 1 2 3 4
Page 16 - Disassembly steps; Detach the headgear from the mask frame by unlatching each of the; WARNING
10 Emergency removal In the event of an emergency, remove the mask by placing your finger under the lower headgear strap and firmly pulling it away from the child – this will activate the quick release clip. Do not use this removal method under normal circumstances. Disassembly Disassembly steps 1. ...
Page 17 - Disassembly
Page 18 - Headgear reassembly; You don’t need to disassemble your Pixi headgear to wash it.; Headgear reassembly steps
12 Headgear reassembly Pixi Hints! • You don’t need to disassemble your Pixi headgear to wash it. • The Velcro straps and plastic buckles have been color coded for ease of assembly. Headgear reassembly steps 1. Lay the headgear and plastic buckles out on a flat surface as shown, ensuring the lower h...
Page 20 - Reassembly; Reassembly steps
14 Reassembly Reassembly steps 1. Insert each side of the cushion into the sockets of the mask frame. Ensure the cushion is oriented correctly. The arrows on the cushion should be pointing up towards the plug tether. The raised vented area of the cushion should also be sitting up against the mask fr...
Page 21 - Cleaning the mask; The mask and headgear should only be gently handwashed.
15 English Cleaning the mask The mask and headgear should only be gently handwashed. Daily/After each use: • Disassemble the mask components according to the disassembly instructions. • Thoroughly clean the separated mask components (excluding headgear), by gently rubbing in warm (approximately 30°C...
Page 22 - Troubleshooting
16 Troubleshooting Problem / possible cause Solution Mask is too noisy Vent is blocked or partially blocked. If the vent requires cleaning, use a soft bristle brush. Elbow or plug is incorrectly inserted. Remove the elbow and plug from the mask and then reassemble according to the instructions. Mask...
Page 24 - Technical specifications; The mask contains passive venting to protect against; Therapy pressure
18 Technical specifications Pressure–flow curve The mask contains passive venting to protect against rebreathing. As a result of manufacturing variations, the vent flow rate may vary. Vent fl ow rate (L/min) 0 10 20 30 40 50 60 70 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 Pressure(cm H 2 O ) Flow(L/m...
Page 25 - Storage; Consumer warranty
19 English Notes: • The mask system does not contain PVC, DEHP or phthalates. • This product does not contain natural rubber latex. • The manufacturer reserves the right to change these specifications without notice. Storage Ensure that the mask is thoroughly clean and dry before storing it for any ...
Page 27 - ENG
Global leaders in sleep and respiratory medicine www.resmed.com 618215/1 2011-09 Pixi USER EUR ENG 1 2 3 4 5 6 618215
