Remington 076728J, 100089-06, 099178H EL-1, 075762J, 098031J, 099039J, 100015, 100089-01, 100089-04, 100089-05, 100089-07, 076702J, 104316-01, 104317 - Manual
Remington 076728J, 100089-06, 099178H EL-1, 075762J, 098031J, 099039J, 100015, 100089-01, 100089-04, 100089-05, 100089-07, 076702J, 104316-01, 104317 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – ELECTRIC CHAIN SAW; BEFORE OPERATING SAW; Safety Warnings on; WHILE OPERATING SAW
- Page 3 – OWNER’S MANUAL; KICKBACK
- Page 4 – Tip or end of guide bar.
- Page 5 – Figure 2 - Electric Chain Saw; UNPACKING; Remove all items from carton.
- Page 6 – Figure 4 - Part Locations For Assembling Guide Bar; ASSEMBLY; Tighten guide bar nuts
- Page 7 – Continued; For pre assembled models, the saw; WARNING: Unplug chain saw; Figure 6 - Turning Adjusting Screw; Figure 7 - Saw Chain Adjustment; For temperatures below 30; FILLING OIL TANK
- Page 8 – EXTENSION CORDS; Cord; OILING CHAIN; Safety; Figure 9 - Pressing Oil Cap to Oil Chain
- Page 9 – Figure 12 - Felling A Tree; Before Felling a Tree; Clear work area around tree.; Figure 11 - Retreat Path From Tree; FELLING A TREE; If lower notch cut is eight
- Page 10 – BUCKING A LOG; Follow directions below to buck a log.; LIMBING A TREE; Figure 13 - Limbing A Tree; Log Supported On One End
- Page 11 – Figure 17 - Cutting A Limb; WARNING: Do not operate; Log Supported On Both Ends
- Page 12 – CLEANING SAW BODY; Figure 19 - Guide Bar Maintenance; Normal Guide Bar Maintenance; Remove guide bar from chain saw.
- Page 13 – Figure 20 - File and File Guide Placement On Chain; SHARPENING SAW CHAIN; Items Needed to Sharpen Chain; Sharpening Cutters
- Page 14 – Filing Cutter Depth Gauges; Figure 22 - Depth Gauge Tool On Chain; Figure 24 - Turning Sharpener Knob; Figure 25 - Sharpening Fast Sharp Chain; REPLACING SAW CHAIN; For proper chain and
- Page 15 – TROUBLESHOOTING; WARNING: Unplug chain saw from power source before servicing.; OBSERVED FAULT; STORAGE
- Page 16 – AUTHORIZED SERVICE CENTERS
- Page 20 – INTERNATIONAL; ELECTRIC CHAIN SAW LIMITED WARRANTY; REPAIR SERVICE; Only use original replacement parts.; Warranty Service; NOT A UPC
®
®
IMPORTANT: Read and understand this manual before assembling or
operating this chain saw. Improper use of saw can cause severe
injury. Keep this manual for future reference.
MODELS
LNT-2: 076728J, 100089-06, & 099178H
EL-1, EL-1 Fast Sharp
EL-7: 075762J, 098031J, 099039J, 100015,
100089-01, 100089-04, 100089-05, & 100089-07
EL-7 Fast Sharp: 076702J
Pole Saw: 104316-01
Pole Saw Assembly: 104317
ELECTRIC CHAIN SAW
OWNER’S MANUAL
®
®
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 097017 ELECTRIC CHAIN SAW ® SAFETYWARNINGS BEFORE OPERATING SAW 1. Read and understand this owner ’smanual before operating chain saw. 2. Watch what you are doing. Use com-mon sense. Do not operate saw whenyou are tired. 3. Use chain saw for cutting wood only.Do not use chain saw for purpose notin...
3 097017 OWNER’S MANUAL Kickback Safety Devices OnThis Saw This saw has a low-kickback chain andreduced kickback guide bar. Both itemsreduce the chance of kickback. Kickbackcan still occur with this saw. Properly install front hand guard. This itemcan reduce injuries from kickback. Followassembly in...
4 097017 ELECTRIC CHAIN SAW ® CHAIN SAW NAMESAND TERMS Bucking Process of cutting a felled tree or log into lengths. Felling Process of cutting down a tree. Felling Cut Final cut when felling a tree. Make this cut on opposite side of tree fromnotching cut. Front Handle Located at front of saw body. ...
