Raypak 0090B 0135B - Manual
Raypak 0090B 0135B – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Contents
- Page 4 – INSTALLATION PROCEDURES
- Page 5 – two; If louvers, grills or screens are used on the; wood
- Page 6 – These boilers must not be connected into; ANSI; Roof Pitch
- Page 8 – MOUNTING; do not; to the side of the vent.; Hole in Vent Damper Blade; INSTALLING THE VENT DAMPER IN HORIZONTAL
- Page 9 – contacts
- Page 10 – Sediment Trap Gas Valve; MODEL NAT PRO NAT PRO NAT PRO NAT PRO; System
- Page 11 – the chilled medium from entering the boiler.; TYPICAL PIPING
- Page 14 – WIRING DIAGRAM KEY; If it is necessary to replace any of the original; ELECTRICAL WIRING
- Page 15 – See page 14 wiring diagram key information.; WIRING DIAGRAM: STANDING PILOT 24 V 2 STAGE
- Page 16 – *REFER TO INSTALLATION/OPERATING INSTRUCTIONS
- Page 18 – WIRING DIAGRAM: Dual Zone Honeywell Valve
- Page 22 – SERVICING PROCEDURES; GENERAL LOCATION OF CONTROLS; CONTROL BOX COMPONENT; SEQUENCE OF OPERATION
- Page 23 – Circulator motor supplied with the boiler does
- Page 24 – SECTION 3. Lighting the Boiler; Liquefied petroleum gas is heavier than air; For Standing Pilot Models; If you do not follow these instructions; BEFORE LIGHTING
- Page 27 – DO NOT; Testing the Ignition Safety Shutoff.
- Page 28 – Modulating burner flame varies in height from
- Page 31 – TROUBLE SHOOTING GUIDE; IMPORTANT NOTICE; equipment nor attempt repairs according to these instructions.
- Page 33 – Make sure electrical power to the boiler is disconnect-
- Page 34 – CAUTION; To avoid damage to electrical components; REPLACEMENT PARTS LIST; To supply the correct part it is important that you
- Page 36 – LIEU OF HSI IGNITION.
Catalog No.: 2100.50P
Effective: 11-01-99
Replaces: 6-01-99
P/N 240488
THIS MANUAL SHOULD BE MAINTAINED IN LEGIBLE CONDITION
AND KEPT ADJACENT TO THE BOILER OR KEPT IN A SAFE PLACE
FOR FUTURE REFERENCE.
®
OPERATING AND
INSTALLATION
INSTRUCTIONS
Models
0030B, 0042B, 0066B, 0090B
0135B, 0180B
Type H
RESIDENTIAL BOILERS
FOR YOUR SAFETY
Do not store or use gasoline or other flammable vapors and liquids or other combustible materials
in the vicinity of this or any other appliance. To do so may result in an explosion or fire.
WARNING:
Improper installation, adjustment, alteration, service or maintenance can cause
property damage, personal injury or loss of life. Refer to the user's information manual provided
with this boiler. Installation and service must be performed by a qualified installer, service agency
or the gas supplier.
FOR YOUR SAFETY
WHAT TO DO IF YOU SMELL GAS
*Do not try to light any appliance.
*Do not touch any electrical switch; do not use any phone in your building.
*Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's
instructions.
*If you cannot reach your gas supplier, call the fire department.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
These instructions are provided to assure the proper installation and operation of Raypak boilers. Should questions arise regarding the specifications, installa- tion, operation or servicing of these boilers, we suggest that the local Sales representative or the factory be consulted. 2 3 1. RECEIVIN...
3. INSTALLATION PROCEDURES CODE REQUIREMENTS Installation must be in accordance with local codes , or, in the absence of local codes, with the latest editions of the National Fuel Gas Code , ANSI Z223.1 , and the National Electrical Code , ANSI/NFPA 70. In Canada installations must conform with the ...
2) When the boiler is installed in a confined space such as a utility room or closet (Models 0030,0042and 0066 only), where all air is supplied from inside the building, the boiler room must be provided with two openings, each one having a minimum net free area, in square inches as follows: Model Sq...
