Raritan Security Camera - Manual

1.

Attach the included AC power cord to

IP-Reach, and into an AC power outlet.

2.

Attach a PS/2 keyboard and multisync

monitor to the corresponding ports in the
back of IP-Reach marked “Admin Console.”

3.

Power ON IP-Reach.

4.

After booting, IP-Reach will display the

Setup Wizard on the Admin Console screen.
Press ‘B’ on the Admin Console keyboard to
begin configuring IP-Reach.

5.

On the Key Configuration Screen, enter

the 16-digit user license key located on the
software certificate included with your IP-
Reach unit. Press <Ctrl+S> to save.

6.

On the Network Configuration Screen,

assign a unique name (e.g. “Server_Room”)
and IP Address parameters for IP-Reach.

7.

The Main Menu appears. Browse

through the Admin Console options to
configure IP-Reach as appropriate to your
environment. Refer to the User Manual
found on the enclosed CD-ROM for detailed
descriptions of administrative parameters.

8.

When satisfied with your IP-Reach con-

figuration, return to the main menu of the

Admin Console, and press ‘R’ to “Restart or
shutdown IP-Reach”. Press ‘S’ to shutdown,
and power OFF IP-Reach.

9.

At this time, you may detach the PS/2

keyboard and multisync monitor from the
Admin Console ports, or leave them
attached for future monitoring or further
configuration.

ALTERNATIVE:

As an alternative method

of performing initial configuration, you may
connect to IP-Reach via a web browser on a
Windows computer, instead of directly via a
keyboard and monitor as described above.

To do so, simply attach a crossover

Ethernet cable between the network ports of
IP-Reach and your computer; enter IP-
Reach’s default IP address into Internet
Explorer (192.168.0.192); and login with the
default username / password (“admin” /
“raritan”).

After authenticating, you will be directly

connected to your IP-Reach unit. On the left-
hand side of the window, double-click on
the “Admin Console” port to commence
remote administration of your IP-Reach unit.

IP-Reach

®

Quic

k Installation and Setup Guide

I P

- R

e a

c h

M

S

e ri

e s

Quick Installation and Setup Guide

For more detailed installation and operating instructions, please

consult the User Manual found on the enclosed CD-ROM.

I. Prepare Servers and Network for Remote Operation

Congratulations on your purchase of IP-Reach, the industry-leading solution for multi-platform, high-performance, remote,
network-based KVM console access. IP-Reach enables highly-secure, multi-user, bandwidth-efficient, and software-independent
access to your servers’ KVM consoles via a web browser.

Before installing IP-Reach, first configure each server which you intend to access remotely with the following parameters. This
important installation procedure ensures optimal video / mouse performance and responsiveness.

All Servers

A. For optimal bandwidth efficiency and
video performance, set the desktop back-
ground to a predominantly solid, plain, light-
colored graphic.

B. Ensure that the server’s video resolution
and refresh rate are supported by IP-Reach,
and the signal is non-interlaced:

Text Mode

1024x768 @ 60Hz

640x480 @ 60Hz

1024x768 @ 70Hz

640x480 @ 72Hz

1024x768 @ 75Hz

640x480 @ 75Hz

1024x768 @ 85Hz

640x480 @ 85Hz

1152x864 @ 60Hz

800x600 @ 60Hz

1152x864 @ 75Hz

800x600 @ 72Hz

1280x1024 @ 60Hz

800x600 @ 75Hz
800x600 @ 85Hz

Network / Firewall

In order to enable IP-Reach, your network
and firewall must allow communication on
TCP Port 5000. Alternatively, IP-Reach can
be configured to use a different TCP port of
your own designation (in step II-6 below).

Windows XP

Disable “Enhanced Pointer Precision”, and set
the mouse motion speed exactly to the
middle speed setting; these options are locat-
ed in Control Panel > Mouse > Mouse Pointers.

Windows 2000 / ME

Set mouse pointer acceleration to “none”,
and the mouse motion speed exactly to the
middle speed setting.

Windows 95 / 98 / NT

Set mouse motion speed to the slowest
setting in Control Panel > Mouse > Motion.

Linux

Set mouse acceleration to exactly 1, and
threshold to exactly 1.

Sun Solaris

Set mouse acceleration to exactly 1.0. Also
be sure that your video card is set to a
supported resolution, and is outputting VGA
(H-and-V Sync, not composite sync). This
non-default configuration can be set in the
bootprom mode by issuing the command
“setenv output-device screen:r1024x768x70”,
followed by “boot” to reboot.

Macintosh

While no specific mouse setting is required,
when using IP-Reach to access and control
a Macintosh system, you must set the IP-
Reach client to “single cursor” mode. See
IP-Reach User Manual for more details.

II. Attach Local Console for Initial Configuration

Raritan Computer Inc.

400 Cottontail Lane
Somerset, NJ 08873
USA
Tel. 1-732-764-8886
Fax. 1-732-764-8887
E-mail: [email protected]
http://www.raritan.com

Raritan Computer Europe, B.V.

P.O. Box 566
2900 AN Capelle aan den IJssel
The Netherlands
Tel. 31-10-284-4040
Fax. 31-10-284-4049
E-mail: [email protected]
http://www.raritan.com

Raritan Computer Japan, Inc.

Kuga Building 7F
11-6, Kuramae 4-chome
Taitoo-ku, Tokyo 111-0051, Japan
Tel. 81-3-5833-6360
Fax. 81-3-5833-6336
E-mail: [email protected]
http://www.raritan.co.jp

Raritan Computer Taiwan, Inc.

5F, 121, Lane 235,
Pao-Chiao Rd., Hsin Tien
Taipei Hsien, Taiwan, ROC
Tel. 886-2-8919-1333
Fax. 886-2-8919-1338
E-mail: [email protected]
http://www.raritan.com.tw

IP-Reach M1 / M2

To AC Power Outlet

1

2

Local Admin Console

KEYBOARD AND MONITOR USED TO

PERFORM INITIAL CONFIGURATION

255-80-3102 Rev0A