Raritan P2CIM-SER - Manuals

Raritan P2CIM-SER – Manual in PDF format online.

Manuals:

Manual

Manual Raritan P2CIM-SER

Summary

Page 3 - regional Raritan contact information.

Copyright and Trademark Information This document contains proprietary information that is protected by copyright. All rights reserved. No part of this document may be photocopied, reproduced, or translated into another language without express prior written consent of Raritan, Inc. © Copyright 2010...

Page 4 - Power Safety Guidelines; Do not use a 2-wire power cord in any product configuration.; Rack Mount Safety Guidelines; Ensure sufficient airflow through the rack environment.

Power Safety Guidelines To avoid potentially fatal shock hazard and possible damage to Raritan equipment: • Do not use a 2-wire power cord in any product configuration. • Test AC outlets at your computer and monitor for proper polarity and grounding. • Use only with grounded outlets at both the comp...

Page 5 - Contents

C ONTENTS i Contents Chapter 1: Introduction ....................................................................................................1 Overview....................................................................................................................................1 Product Pho...

Page 6 - Figures

ii Paragon and Dominion KX II Serial Device CIM User Guide Figures Figure 1 P2CIM-SER/P2CIM-SER-EU ........................................................................................................ 1 Figure 2 P2CIM-SER/P2CIM-SER-EU Connectors ......................................................

Page 7 - Chapter 1: Introduction; Overview

C HAPTER 1: I NTRODUCTION 1 Chapter 1: Introduction Congratulations on purchasing a Raritan P2CIM-SER or P2CIM-SER-EU terminal converter. This User Guide explains how to use these converters to access and operate an ASCII serial device through a Raritan Dominion KX II or Paragon KVM switch. Note: Th...

Page 9 - Language Keyboards

C HAPTER 1: I NTRODUCTION 3 Language Keyboards The P2CIM-SER supports ISO-646 with these language keyboards: • USA • French • German • UK • Denmark I • Swedish • Italian • Spanish I • Japanese English • Norway • Denmark II • Spanish II • Latino America • Korean English • Legal The P2CIM-SER-EU is th...

Page 10 - Chapter 2: Installation; Before You Begin; Note: The maximum baud rate permitted is 19200 bps.; Connecting the Converter to an ASCII Device; To connect the converter to an ASCII device:; Connecting the Converter to a Power Source

4 Paragon and Dominion KX II Serial Device CIM User Guide Chapter 2: Installation This chapter explains how to install a P2CIM-SER or P2CIM-SER-EU terminal converter. This entails connecting the converter to an ASCII device, a power source, and a KVM switch. Before You Begin Before beginning the ins...

Page 11 - Connecting the Converter to a KVM Switch

C HAPTER 2: I NSTALLATION 5 Connecting the Converter to a KVM Switch To connect the converter to a Raritan Dominion KX II or Paragon KVM switch: 1. Take a standard Category 5e UTP cable and connect one end to the RJ45 connector on the P2CIM-SER or P2CIM-SER-EU. 2. Connect the other end of the cable ...

Page 12 - Chapter 3: Operation; Working in On-Line Mode; Video Display; Display Components; On Line

6 Paragon and Dominion KX II Serial Device CIM User Guide Chapter 3: Operation This chapter explains how to administer an ASCII device connected to a Raritan Dominion KX II or Paragon KVM switch by means of a P2CIM-SER or P2CIM-SER-EU terminal converter. All the operations described in this chapter ...

Page 13 - RMT; Functions Keys; Note: This function may only work with Sun workstations.; Configuring the Converter; Setting the Communications Parameters; Tab

C HAPTER 3: O PERATION 7 Access indicator. It indicates one of the following: • RMT Remote port (RJ45) is active. • NO No port is active. Command keys that can be used with the screen currently displayed Functions Keys When in On-Line Mode, you can use any of the functions keys shown below: P RESS T...

Page 14 - Programming the Function Keys; To program the function keys:

8 Paragon and Dominion KX II Serial Device CIM User Guide Figure 4 Setup Screen Programming the Function Keys To program the function keys: 1. Press Alt+F3 . The Setup Programmable Keys screen appears. This screen contains entries for each of the 12 programmable function keys. Figure 5 Set Up Progra...

Page 15 - Viewing and Editing the Buffer

C HAPTER 3: O PERATION 9 2. Use the Tab and Shift+Tab keys to move the cursor to a function key. 3. Type a maximum of 16 characters for the function key. To type special characters, use Ctrl+V . For example, to enter a carriage return (CR), type Ctrl+V + Enter . 4. Repeat Steps 2 and 3 until you hav...

Page 16 - Obtaining On-Line Help

10 Paragon and Dominion KX II Serial Device CIM User Guide Obtaining On-Line Help You can obtain on-line help at any time during your session by pressing Alt+F1 . This displays the Help screen, which lists the on-line, setup, and buffer edit commands. Figure 7 Help Screen

Page 17 - Product Photos; The PWR-SER-4 also comes with a bracket to mount the device on a rack.

A PPENDIX A: PWR-SER-4 P OWER A DAPTER 11 Appendix A: PWR-SER-4 Power Adapter The PWR-SER-4 power adapter enables you to connect up to four P2CIM-SER or P2CIM-SER-EUs to a standard power outlet using their USB connectors. Product Photos Figure 8 PWR-SER-4 Components Package Contents (1) PWR-SER-4 po...

Page 18 - Appendix B: Field Firmware Upgrade; Perform the upgrade; Run

12 Paragon and Dominion KX II Serial Device CIM User Guide Appendix B: Field Firmware Upgrade This appendix explains how to perform a field firmware upgrade. Perform the upgrade 1. This upgrade requires the use of Atmel’s FLIP (Flexible In-system Programmer). Open a browser and point it at the Atmel...

Page 19 - Appendix C: Pin Definition of DB9 Connector; None

Appendix C: Pin Definition of DB9 Connector The female DB9 connector of the P2CIM-SER or P2CIM-SER-EU is a standard Data Communication Equipment (DCE) serial connector. The following table lists the signal of each pin. Please note that P2CIM-SER and P2CIM-SER-EU do NOT support RS-232 hardware flow c...