Raritan QSG-DKX3 - Manual
Raritan QSG-DKX3 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Step 1: Configuring Network Firewall Settings; Step 1: Configuring KVM Target Servers; Mouse Settings; Additional Supported Mouse Settings; Target Server Video Resolutions; Supported Target Server Video Resolutions; Step 3: Connecting the Equipment; To connect to the network:
- Page 3 – To connect the keyboard and mouse:; Connect to a DVI Monitor; To connect to a DVI monitor:; E. Connect Target Servers to the KX III; To connect a target server to the KX III:; Step 4: Configuring the KX III; Change the Default Password; To change the default password:; admin; Assign the KX III an IP Address; To assign an IP address to the KX III:; Configure the IPv4 Settings
- Page 4 – Configure the IPv6 Settings; To name the target servers:; Specify Power Supply Autodetection; To set the date and time:
- Page 5 – Optional; Step 5: Launching the KX III Remote Console; To launch the KX III Remote Console:; Access and Control Target Servers Remotely; To access a target server:; Switch between Target Servers; To switch between KVM target servers:; Disconnect from a Target Server; To disconnect a target server:; Step 7: Create and Install an SSL Certificate
- Page 6 – For information creating and installing SSL certificates, see; SSL Certificates; in KX III Online Help.; Additional Information; For more information about the KX III
KX III Quick Setup Guide
1
QSG-DKX3-v3.0.0-0B-E
255-62-0003-00-RoHS
Dominion™ KX III
Quick Setup Guide
Thank for choosing the Dominion
™
KX III, the industry's highest performance enterprise-class, secure, digital KVM
(Keyboard, Video, Mouse) switch.
This Quick Setup Guide explains how to install and configure the KX III. For details on using the KX III, access online
help from the application, or download help in PDF format from the
Package Contents
Each KX III ships as a stand-alone product in a standard 1U
or 2U 19" rackmount chassis, depending on your KX III
model.
The KX III device ships with the following contents:
1 - KX III device
1 - KX III Quick Setup Guide
1 - Rackmount kit
2 - AC power cords
1 - Set of 4 rubber feet (for desktop use)
1 - Application note
1 - Warranty card
QS R ule
In Raritan products that require Rack Mounting, please follow
these precautions:
Operation temperature in a closed rack environment may
be greater than room temperature. Do not exceed the
rated maximum ambient temperature of the appliances.
See
Specifications
Ensure sufficient airflow through the rack environment.
Mount equipment in the rack carefully to avoid uneven
mechanical loading.
Connect equipment to the supply circuit carefully to avoid
overloading circuits.
Ground all equipment properly, especially supply
connections, such as power strips (other than direct
connections), to the branch circuit.
QS R ule
Rack Mounting
The KX III can be mounted in 1U (1.75", 4.4 cm) of vertical
space in a standard 19" equipment rack.
Note: The Raritan device depicted in the rack mounting
diagrams is for example purposes only and may not depict
your device. The mounting instructions are specific to your
device.
Forward Mount
The steps correspond to the numbers shown in the front
rackmount diagrams.
1. Secure the cable-support bar to the back end of the side
brackets using two of the included screws.
2. Slide the KX III between the side brackets, with its rear
panel facing the cable-support bar, until its front panel is
flush with the “ears” of the side brackets.
3. Secure the KX III to the side brackets using the remaining
included screws (three on each side).
4. Mount the entire assembly in your rack, and secure the
side brackets' ears to the rack's front rails with your own
screws, bolts, cage nuts, and so on.
5. When connecting cables to the rear panel of the KX III
drape them over the cable-support bar.
Rear Mount
The steps correspond to the numbers shown in the rear
rackmount diagrams.
1. Secure the cable-support bar to the front end of the side
brackets, near the side brackets' “ears,” using two of the
included screws.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
KX III Quick Setup Guide 2 QSG-DKX3-v3.0.0-0B-E 255-62-0003-00-RoHS 2. Slide the KX III between the side brackets, with its rear panel facing the cable-support bar, until its front panel is flush with the back edges of the side brackets. 3. Secure the KX III to the side brackets using the remainin...
KX III Quick Setup Guide 3 QSG-DKX3-v3.0.0-0B-E 255-62-0003-00-RoHS C. Local User Port (Local Console) To connect the keyboard and mouse: Connect a USB keyboard and mouse to the respective Local User ports on the back of the KX III. Use the KX III Local User port for administrative and target se...
KX III Quick Setup Guide 4 QSG-DKX3-v3.0.0-0B-E 255-62-0003-00-RoHS Configure the IPv6 Settings 1. If using IPv6, enter or select the appropriate IPv6-specific network settings in the IPv6 section: a. Select the IPv6 checkbox to activate the fields in the section and enable IPv6 on the device. b. ...
