RadioShack 49-2011 - Manual
RadioShack 49-2011 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – INTRODUCTION; listens; for the siren from the smoke; hears; the
- Page 5 – INSTALLATION; Slide off the battery compartment
- Page 7 – on the system’s
- Page 8 – on the siren detector.; on
- Page 9 – drill two holes 1
- Page 12 – TESTING; lence the base’s alarm.
- Page 13 – UNINSTALLING; enter your access code.; on the base while; illustration
- Page 14 – NOTES
- Page 16 – Printed in China
Cat. No. 49-2020
OWNER’S MANUAL
Please read before using this equipment.
Smoke Alarm
Siren Detector
for use with the SAFE HOUSE
Wireless Alarm System
(Cat. No. 49-2010/49-2011)
49-2020.fm Page 1 Wednesday, August 18, 1999 2:57 PM
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 INTRODUCTION Your Radio Shack Smoke Alarm Si-ren Detector gives you extra protec-tion if a smoke alarm is out ofnormal hearing range. The detector listens for the siren from the smoke alarm. When the detector hears the siren, it sends a signal to the base,which sounds the system’s alarm. © 1997 Ta...
5 INSTALLATION INSTALLING THE BATTERY 1. Slide off the battery compartment cover. 2. Connect a 9-volt alkaline battery (Cat. No. 23-553) to the batteryconnector. Then place the bat-tery in the compartment. illustration 49-2020.fm Page 5 Wednesday, August 18, 1999 2:57 PM
7 CONNECTING TO THE SYSTEM Follow these steps to add the sirendetector to your alarm system. 1. Press LEARN on the system’s base. The LEARN indicatorflashes. 2. Enter your access code on the base’s keypad. The LEARN indi-cator lights and the next avail-able zone’s indicator flashes. illustration 49-...
