RadioShack 49-2011 - Manuals

Page 2 - INTRODUCTION; listens; for the siren from the smoke; hears; the

2 INTRODUCTION Your Radio Shack Smoke Alarm Si-ren Detector gives you extra protec-tion if a smoke alarm is out ofnormal hearing range. The detector listens for the siren from the smoke alarm. When the detector hears the siren, it sends a signal to the base,which sounds the system’s alarm. © 1997 Ta...

Page 5 - INSTALLATION; Slide off the battery compartment

5 INSTALLATION INSTALLING THE BATTERY 1. Slide off the battery compartment cover. 2. Connect a 9-volt alkaline battery (Cat. No. 23-553) to the batteryconnector. Then place the bat-tery in the compartment. illustration 49-2020.fm Page 5 Wednesday, August 18, 1999 2:57 PM

Page 7 - on the system’s

7 CONNECTING TO THE SYSTEM Follow these steps to add the sirendetector to your alarm system. 1. Press LEARN on the system’s base. The LEARN indicatorflashes. 2. Enter your access code on the base’s keypad. The LEARN indi-cator lights and the next avail-able zone’s indicator flashes. illustration 49-...

Page 8 - on the siren detector.; on

8 3. Press TEST on the siren detector. The system stores the detector’ssettings in the next availablezone, lights the zone’s indicator,and sounds a brief tone. Note: To assign the siren detec-tor to a zone other than the nextavailable zone, enter the desiredzone number. For example, toassign the det...

Page 9 - drill two holes 1

9 MOUNTING THE DETECTOR To ensure the siren detector de-tects the smoke alarm when itsounds, mount the detector 4–6inches from a UL-approved smokealarm (Cat. No. 49-466). Follow these steps to mount the de-tector. 1. At the desired mounting location, drill two holes 1 3 / 4 inches apart, one above t...

Page 12 - TESTING; lence the base’s alarm.

12 TESTING To test the siren detector, holddown the smoke alarm’s test buttonuntil its siren sounds. The indicatoron the siren detector flashes brieflyand the base sounds an alarm.Press CANCEL on the base to si- lence the base’s alarm. Notes: • You might have to hold down the smoke alarm’s test butt...

Page 13 - UNINSTALLING; enter your access code.; on the base while; illustration

13 UNINSTALLING Follow these steps to remove thesiren detector. 1. Press LEARN on the base. Then enter your access code. 2. Enter the zone number for the siren detector. The correspond-ing zone indicator flashes. 3. Press CANCEL on the base while the indicator flashes. The indica-tor turns off. 4. P...

Page 14 - NOTES

14 NOTES 49-2020.fm Page 14 Wednesday, August 18, 1999 2:57 PM

Page 16 - Printed in China

RADIO SHACK A Division of Tandy Corporation Fort Worth, Texas 76102 2A7 Printed in China Radio Shack Limited Warranty This security product is warranted against manufacturingdefects in material and w orkmanshi p for ninety (90) days fromthe date of purchase from R adio S hack company ow ned storesan...