Pyle PT502 - Manual
Pyle PT502 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SAFETY GUIDELINES - DEFINITIONS; IMPORTANT SAFETY INSTRUCTIONS
- Page 5 – Operation; IMPORTANT; ASSEMBLY; Accessories Required; Air Inlet
- Page 6 – To lubricate the air motor manually:; SAE #10 weight oil if air tool oil is not available.; away from people or objects.
- Page 7 – REPAIR PARTS; Description
- Page 8 – LIMITED WARRANTY
IMPORTANT
Please make certain that the person who is
to use this equipment carefully reads and
understands these instructions before
starting operations.
Part No. D22724-028-3
1/2” Impact Wrench
Herramienta
Neumátiaca de Impacto,
de 1/2"
IMPORTANT
Veuillez vous assurer que la personne qui
utilise cet outil lit attentivement et comprend
ces instructions avant de commencer à utiliser
l'outil.
Clé à chocs de 1/2 po
IMPORTANTE
Asegúrese de que la persona que va a usar esta
herramienta lea cuidadosamente y comprenda
estas instrucciones antes de empezar a
operarla.
ESPAÑOL: PÁGINA 9
FRANÇAIS: PAGE 17
Copyright © 2002 Porter-Cable Corporation
Instruction manual
Manual de
Instrucciones
Manuel d'instructions
MODEL PT502
MODÈLE PT502
MODELO PT502
To learn more about Porter-Cable visit
our website at:
http://www.porter-cable.com
Pour de plus amples renseignements
concernant Porter-Cable, consultez
notre site Web à l'adresse suivante:
http://www.porter-cable.com
Para obtener más información sobre
Porter-Cable, visite nuestro sitio web en:
http://www.porter-cable.com
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2- ENG D22724 • Air powered equipment and power tools are capable of propelling materials such as fasteners, metal chips, sawdust, and other debris at high speed, which could resultin serious eye injury. • Tool attachments can become loose or break and fly apart propelling particles at the operator ...
Operation Before each use: ● Drain water from air compressor tank and conden-sation from air lines. See air compressor’s operatorsmanual. Disconnect the tool from the airsupply before lubricating or changing sockets. ● Lubricate tool, see “Maintenance” section in thismanual. Impact wrench sockets an...
6- ENG D22724 MAINTENANCE Lubrication Air tools require lubrication throughout the life of the tool. The air motor and bearing uses com-pressed air to power the tool. Because moisture in compressed air will rust the air motor, you mustlubricate the motor daily. An inline oiler is recommended. To lub...
