Pyle PHRM22 - Manuals - manualsarea.com

Page 2 - D SENSOR FROM GERMANY-MEASURES YOUR MOVEMENT ACCURATELY; The Complete Training System; Wear the

3D SENSOR FROM GERMANY-MEASURES YOUR MOVEMENT ACCURATELY -The 3D technology in the accelerator is an accelerometer Sensor to measure acceleration in walking or running.-3D Sensor has intelligent step filter function-steps only count when the unit detects-3D Sensor allows users to customize to their ...

Page 3 - USING THE WATCH FUNCTIONS; NORMAL WALKING AND CHRONOGRAPH RUNNING; Mode Flow Chart

USING THE WATCH FUNCTIONS IMPORTANT ! - Before the units are transported, the watches are switched off for energy saving purposes. The user will need to turn it on by pressing the MODE key when they have purchased the product NORMAL WALKING AND CHRONOGRAPH RUNNING -There are two-step counting featur...

Page 4 - NOTE; Heart rate detection; USING THE USB CONNECTOR

NOTE - When you walk or run for around 10 seconds, the unit sensor will pick this up and a display showing current pace for the walk or run will appear. - If you wish to have the most accurate fitness index calculated by the unit, the user must use the calibration feature for both walking and runnin...

Page 5 - MEMORY DATA; RECALL

5 You need to preset the following personal information before using the watch.The Unit You Want To UseYour Normal Walking Stride LengthYour Chronograph Running Stride LengthYour Current WeightYour Current HeightYour GenderYour Age You need to enter the USER SETTING MODE to configure your personalin...

Page 6 - Minute

6 7. To confirm the hour settings, press the MODE/SET button to move on to set the year8. To increment the year digits, press the ST/SP/+ button and to decrement the year digits, press the LAP/SAVE/- button 9. Press the MODE/SET button to confirm the year and continue to adjust the month10. To chang...

Page 10 - Training Setting Mode:

10 6. To save data, press and hold the LAP/SAVE/- button for around 3 seconds and to select whether to save or erase data use the ST/SP/+ button. And to hold the LAP/SAVE/- key for around 3 seconds to confirm your decision. Note: -If there is no heart rate signal for 2 minutes, the heart rate recept...

Page 11 - Chronograph Memory Recall

11 Chronograph Memory Recall 1. Press MODE/SET key to enter memory data where the screen showing RECALL with Chrono will appear after around 2 seconds 2. To increment the laps, press the ST/SP/+ button and to decrement the laps, press the LAP/SAVE/ - button 3. Press and hold the MODE/SET button for ...

Page 14 - USER SETTING MODE

14 USER SETTING MODE 1. Press the MODE/SET key until you have reached the SETTING mode which will have a banner showing USER displaying SETUP 2. Press and hold the MODE/SET button for around 3 seconds to enter into configuring the user setting 3. The first setting is the unit in which you wish your ...

Page 15 - Heart Rate Zone Setting Mode

Heart Rate Zone Setting Mode 1. Press the MODE/SET key until you have reached the SETTING mode which will have a banner showing USER displaying SETUP 2. Press the LAP/SAVE/ - button to enter Heart Rate Zone Setting Mode and holding the MODE/SET key 3. To increment the activity level, press the ST/SP...

Page 16 - Stride calibration mode

16 Stride calibration mode 1. Press the MODE/SET key until you have reached the SETTING mode which will have a banner showing USER displaying SETUP2. Press LAP/SAVE/ - button to enter stride calibration mode and press ST/SP/+ button to scroll through walking stride length and running stride length T...

Page 18 - Login the program and enter to the Main Screen.

18 PC-LINK PROGRAM OPERATION First User:Click " NEW USER " button to enter one's USER NAME and then enter password . PC LINK COMMUNICATION MODE 1. Press "UPLOAD" button on the pc-link program and will automatically upload the data to PC. 2. Press Mode/Set will back to Time/Date mode....

Page 19 - INSTALLING THE BATTERY; and you can then/will need to re-set the watch all over again.; Watch

19 INSTALLING THE BATTERY The Watch uses 2 pieces CR 2032 batteries (one each for watch and heart rate belt ).Use only the recommended batteries. NOTE : Changing the battery will erase the data in the watch previously input into the device and you can then/will need to re-set the watch all over agai...

Page 20 - Heart Rate Belt; Dlagram 1; SPECIFICATIONS

20 Heart Rate Belt Hold the Heart Rate Belt firmly. Insert a coin into the slit of the compartment lid and turn itclockwise. The lid should come off easily. (Remove used battery CR2032 ) (Diagram 1)Gently place the battery into the battery slot of the battery compartment. (Diagram 2)Put the compartm...