Pyle PPDLD3 - Manual
Pyle PPDLD3 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
DELAY EFFECT PEDAL
PPDLD3
INSTRUCTIONS
PPDLD3 : Delay
Input Impedance:
1M Q
Output Impedance: Over 10k
Q
Power Supply:
9 V
DC :
Dry Battery
9 V
type
( 6F22/9V)
,
AC Adaptor.
Current Draw: 12mA
(9V
DC )
I. D.TIME Knob
This is the delay times control . times is increased when control
is turned clockwise and decreased when turned counterclockwise.
2. FEEDBACK knob
This controls the amount of feedback. delay effect will
increase by turning it clockwise and decrease by turning it
counterclockwise.
3. D.LEVEL knob
Controls the level of delay. Effect is increased by turning
clockwise and decreased by turning it counterclockwise.
4.
Output Jack
The output jacks are used to connect the unit to amplifiers
or other devices.
5.
AC Adaptor Jack
Accepts connection of an AC Adaptor. By using an AC
Adaptor, you can play without being concerned about how
much battery power you have left .
6.
Input Jack
This jack accepts input signals (coming from a guitar ,
some other electric or electronic musical instrument, or
another effects unit)
7.
Check Indicator
This indicator shows whether
an
effect is ON/OFF, and
also doubles as the Battery Check indicator .The indicator
lights when an effect is ON. If this indicator goes dim or
no longer lights while an effect is ON, the battery is near
exhaustion and should be replaced immediately.
8.
Pedal Switch
This Switch turns the effects ON/OFF.
9.
Battery Housing
9 V
Battery is be placing inside it .
www.PyleAudio.com
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
