Pyle PLTVR5 - Manual - manualsarea.com

Page 2 - INSTALLATION; driving function of the driver.; INSTALLATION HARDWARE

2 INSTALLATION Notes: • Choose the mounting location where the unit will not interfere with the normal driving function of the driver. • Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly. • Use o...

Page 3 - Installing the unit

3 MOUNTING THE TUNER UNIT 1. Bracket (A) 5. Tapping Screw with Washer (M5 x 12) 2. Mounting Bolt (M5 x 5) 6. Spring Washer (M6) 3. Bracket (B) 7. Spring Washer (M5) 4. Hexagonal Bolt with Washer (M6 x 12) 8. Double Sided Tape INSTALL THE DISPLAY UNIT Before install the display unit, please remove it...

Page 5 - HOW TO OPEN AND CLOSE THE SCREEN DISPLAY; Press release button to draw out the screen display.; Release Button

5 HOW TO OPEN AND CLOSE THE SCREEN DISPLAY 1. Press release button to draw out the screen display. 2. Turning the display upward. 3. Adjusting the viewing angle. Angle should be adjusted slowly without applying unreasonable force. Release Button

Page 6 - before drawing in. It cannot be draw in with its angles adjusted.

4. Turning the display downward. Make sure to return the display to centre position before drawing in. It cannot be draw in with its angles adjusted. 5. Push the panel, the display will be drawn in. 6

Page 7 - ELECTRICAL CONNECTION; cannot switch into TV mode.

ELECTRICAL CONNECTION CAUTION: 1. If the TV control grey cable is connected to car brake, when the car is running, you cannot switch into TV mode. 2. To select CD changer’s sort: Before installing the unit, connect the CD changer with the unit correctly and turn on the power to make the unit work in...

Page 8 - OPERATION

8 OPERATION 30 4 28 29 26 24 27 25 31 23 15 4 11 1 9 2 10 5 16 13 14 32 12 20 21 19 18 17 22 3 6 8 7

Page 9 - GENERAL OPERATION; VOL

9 GENERAL OPERATION • ON/OFF Switch on the unit by pressing POWER button (1). When system is on, press it again to turn it off. • FACEPLATE RELEASE Press REL button (2) to draw out the faceplate, push the panel to draw in. When the faceplate is drawn out, turn the faceplate upward and adjust TV disp...

Page 11 - RADIO OPERATION

RADIO OPERATION • SELECTING BAND Press BAND button (11) to change between three FM bands and two AM bands. Each band stores up to six preset stations. • SELECTING STATION During radio mode, press button (13) to increase frequency or button (14) to decrease frequency by one step of channel spacing. H...

Page 12 - CDC OPERATION; MAIN UNIT

12 CDC OPERATION • SELECTING TRACK During CDC mode, press button (14) or button (13) shortly to move to the previous track or the next track. The track number shows on the display. • SELECTING CD Press D.UP button (17) to select next disc and D.DN button (18) to select previous disc. • REPEAT THE SA...

Page 13 - TV OPERATION

TV OPERATION • SELECTING RECEIVING MODE Press TV/AV button (31) to select among TVch/AV1/AV2. • PICTURE ADJUSTMENT/PROGRAM SETTING/SYSTEM CONTROL In TV mode, press MENU button (23) to enter the main menu. And the menu includes three sub-menus: PICTURE MENU, TUNER MENU and SYSTEM MENU.Press the butto...

Page 14 - In the course of scanning, press; SCAN; will also display; • SCREEN DISPLAY; Press; DISP; button (27), the screen will display the current status such as; • REMOTE SENSOR

14 In the course of scanning, press SCAN button (26), “SCAN OFF” will also display on the screen and it stops on the TV channel just scanning. • SCREEN DISPLAY Press DISP button (27), the screen will display the current status such as TVch/AV1/AV2, the COLOR SYSTEM and the SOUND SYSTEM on the right-...

Page 15 - REMOTE CONTROL HANDSET; CONTROL & FUNCTION KEYS

15 REMOTE CONTROL HANDSET 2 11 8 9 10 16 5 6 7 14 13 15 12 17 4 3 1 CONTROL & FUNCTION KEYS 1. POWER = Press POWER to turn the unit ON or OFF 2. TV/AV = Switch between TV/AV1/AV2 3. 0 - 9 = Numeric buttons, press to select the corresponding channel 4. -/-- = Digital selecting button, cooperative...

Page 16 - SPECIFICATION; GENERAL; FM

SPECIFICATION GENERAL P ower Supply Voltage : DC 12 Volts, Negative Ground Maximum P ower : 4 x 60 Watts Load Impedance : 10 Ampere (max.) Tone Controls- Bass (at 100 Hz) : + / – 10 dB - Treble (at 10 KHz) : + / – 10 dB TV Monitor Screen Size : 5.0” TFT Resolution : 960 x 234 dots TV Sensitivity : 4...

Pyle PLTVR5 - Manual

Table of Contents:

Summary

Other Pyle Models