Page 2 - RGB Operation; CONTENTS
Safety Information ....................................................................................... 4 Disc Notes .................................................................................................... 5 Installation ...................................................................
Page 3 - FEATURES; USE THIS PRODUCT SAFELY
3 FEATURES Compatible with NTSC DVD (Video CD) This player can play discs r ecorded ineither NTSC format. A single LSI chip now integrates all major DVD playback circuit functions including MPEG2 decoder, video D/A converter, and audio decoders. L/R stereo analog audio outputs for connection to exis...
Page 4 - TO QUALIFIED PERSONNEL.; SAFETY INFORMATION
4 CAUTION: MOBILE DVD PLAYER IS A CLASS ILASER PRODUCT. HOWEVER THISMOBILE DVD PLAYER USES AVISIBLE/INVISIBLE LASER BEAMWHICH COULD CAUSE HAZARDOUSRADIATION EXPOSURE IF DIRECTED.BE SURE TO OPERATE THE MOBILEDVD PLAYER CORRECTLY ASINSTRUCTED.USE OF CONTROLS ORADJUSTMENTS OR PERFORMANCE OF PROCEDURES ...
Page 5 - DISC NOTES; A disc should always be kept in its
DISC NOTES 5 Disc formats supported by this player DVD 12 cm disc(Single-sided disc only) VIDEO CD 12 cm disc CD 12 cm disc MP3 12 cm disc Discs which cannot be played with thisplayer DVD-ROMDVD-R/DVD-RAMCDVCD-G Handling and Cleaning Dirt, dust, scratches and warping discwill cause misoperation.Do n...
Page 6 - INSTALLATION; Installation Opening; Disconnect the wire harness and the
6 INSTALLATION Notes: Choose the mounting location wherethe unit will not interfere with the normal driving function of the driver . Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly . Use only t...
Page 7 - Removing the unit
7 INSTALLATION Sleeve Dashboard Screwdriver Tabs Spring Washer Tapping Screw Plain Washer Hex Nut Metal Strap Mounting Bolt Removing the unit 1. Make sure the ignition is turned off, and then disconnect the cable fromthe vehicle battery's negative (-)terminal. 2. Remove the metal strap attached the ...
Page 8 - When fix factory radio mounting bracket
8 INSTALLATION DIN FRONT-MOUNT (Method B) 1. Factory radio mounting bracket2. Car radio mounting bracket3. Screw4. After aligning the car radio mounting bracket with the factory radio mounting bracket, tighten the screws (5x5mm) at 2 places on each side. 5. When fix factory radio mounting bracket wi...
Page 9 - THE PLAYER; FRONT VIEW; POWER
9 THE PLAYER FRONT VIEW When the monitor stretching out: 1. POWER 7. PICTURE 2. Remote sensor (on the front panel) 8. VOLUME - 3. OPEN/CLOSE 9. VOLUME + 4. (EJECT) 10. Remote sensor (on the monitor panel) 5. Disc Slot 11. 6.5 INCH COLOR 6. Reset Button TFT MONITOR 1 2 3 6 8 11 4 5 9 10 7
Page 10 - BACK VIEW; A U D I O / V I D E O I N P U T 1
10 THE PLAYER BACK VIEW 12. A U D I O / V I D E O I N P U T 1 16. DIGITAL AUDIO 13. RGB SYSTEM 17. AUDIO/ VIDEO OUTPUT 14. REMOTE SOCKET 18. DC 12V IN 15. AUDIO/ VIDEO INPUT 2 1 2 1 3 1 4 1 5 1 6 1 8 1 7
Page 11 - ELECTRICAL CONNECTION
11 ELECTRICAL CONNECTION 2 1 A U D IO 2 R I N Y E L L O W R E D W H IT E V ID E O 2 I N A U D IO 2 L I N R E M O T E C O N T R O L R E C E IV E R RGB SYSTEM A U D IO R O U T D IG IT A L A U D IO V ID E O O U T A U D IO L O U T Y E L L O W R E D W H IT E M E M O R Y B A C K -U P ( Y E L L O W ) G N D...
Page 12 - REMOTE CONTROL; LOCATION AND FUNCTION OF KEYS
12 REMOTE CONTROL LOCATION AND FUNCTION OF KEYS 4 5 2 11 1 2 3 6 1 5 1 6 1 9 2 3 2 2 1 8 2 0 2 5 2 8 2 9 3 2 2 1 2 4 2 6 3 0 3 1 8 9 7 1 0 1 1 4 1 3 2 7 1 7
Page 14 - Preparing the Remote Contr ol; Inserting the Batteries
14 REMOTE CONTROL Preparing the Remote Contr ol Inserting the Batteries 1. Open the battery compartment cover.2. Insert the new batteries. Make sure that the positive and negative terminals of the batteries are orientedas indicated. 3. Close the cover Battery: Two AAA size battery. Using the Remote ...
Page 15 - LOADING/EJECTING A DISC; Loading a Disc; Turn the ignition on the accessory; Insert the disc with printed side facing; Ejecting a Disc; Press
LOADING/EJECTING A DISC Loading a Disc 1. Turn the ignition on the accessory position. 2. Press the POWER button (1). 3. Insert the disc with printed side facing up into the disc slot (2). 4. The player starts playback automatically. Ejecting a Disc Press (EJECT) button (3) to eject the disc. 15 1 3...
Page 16 - OPERATION; BASIC OPERATION; Turnig the player on/off
16 OPERATION BASIC OPERATION Turnig the player on/off Press the POWER button on the front panel or (POWER) button on the remote control to turn the player on oroff. Open/Close the Monitor and AngleAdjustment Press OPEN/CLOSE button on the front panel or point the remote control to the remote sensor ...
Page 17 - will show on the display.
17 OPERATION Remote Sensor There is a remote sensor on the front panel. On the monitor, there is anotherremote sensor to receive remote control signal. You can point the remote control handset to the remote sensor on the front panel (when the monitor doesn't stretch out) or the remote sensor on the ...
Page 18 - control during playback.
18 OPERATION DISC (DVD, VCD, CD, MP3)OPERATION Switching to DVD mode press MODE button on remote to select DVD mode. Stopping Play - Briefly press the (Stop) button to stop the unit playback, when the (Play) button is pressed, normal playback will continue. - Press (Stop) button twice to stop the pl...
Page 19 - button to play tracks in programmed order.; On-Screen Display Function; PROGRAM; button to exit program; ENTER; button to confirm it.
19 Disc Search (GOTO) FOR DVDPress GOTO button twice, the screen will display the following message: You can select the item you want towatch through TIME setting by usingnumeric buttons and ENTER key.FOR CD/VCD (WITH PBC OFF):Press GOTO button once, the screen will display the following message: Us...
Page 21 - Multi-audio Language Function
21 - Some discs only contain one subtitle language. - When no different subtitle language are recorded, will be displayed at screen left top corner . Multi-angle Function (For DVD only) Press ANGLE during playback. Each time the button is pressed, theangle changes in sequential orderNotes:- The angl...
Page 22 - Smart navigation MP3 Disc Play; In stop mode, Use on the; button on the remote control to; REPEAT; During playback, use; RGB OPERATION; Switching to RGB mode; button on remote control to; MODE; button to
22 Smart navigation MP3 Disc Play MP3 disc is playing as the format ofFOLDER.For example: In stop mode, Use on the remote control to select the item or folder (such as CD01, CD02...) and press ENTER button on the remote control to confirm, then select the desired track (such as 001 PLUMT, 002 RZID.....
Page 23 - INITIAL SETUP; SETUP; on the remote control in; GENERAL SETUP MENU; GENERAL SETUP; TV display setup
23 SETUP INITIAL SETUP SETUP MENU --- MAIN PAGE 1. Press SETUP on the remote control in the STOP mode. (Press the button twice to ensure that the player is in STOP mode.) 2. The initial SETUP menu is displayed. 3. Select the pr eferred item by using the / buttons. 4. Press ENTER button. a. GENERAL S...
Page 24 - PIC mode setup
24 SETUP --- GENERAL PAGE --- PIC mode setup Select AUTO, the player PIC mode willdepend on DVD disc.Select HI-RES format for best imageresolution.Select N-FLICKER format on image orpictur e with noise or distortion. --- GENERAL PAGE --- ANGLE MARK display setup If it is set to ON, when the multi-an...
Page 25 - SCR SAVER setup; SPEAKER SETUP; AUDIO OUT
25 SETUP --- GENERAL PAGE --- SCR SAVER setup Select the SCR SAVER ON/OFF. SPEAKER SETUP --- SPEAKER SETUP PAGE --- This is to activate the audio output fromDOLBY AC3 5.1 DOWNMIX to 2 channelmode. Select the preferred SPEAKERconnection by using the cursor buttons. Select the LT/RT to activate the Do...
Page 26 - PREFERENCES SETUP; TV type setup
26 SETUP PREFERENCES SETUP --- PREFERENCES PAGE --- TV type setup This player can play discs r ecorded ineither NTSC format. Select NTSC format, when the unit isconnected to NTSC TV.Select AUTO format, the player TV outputformat will be accor ding to the DVD discformat. --- PREFERENCES PAGE --- AUDI...
Page 27 - SUBTITLE language setup
27 SETUP --- PREFERENCES PAGE --- SUBTITLE language setup Select the preferred SUBTITLE languageby using the cursor buttons. --- PREFERENCES PAGE --- DISC MENU language setup Select the pr eferred DISC MENUlanguage by using the cursor buttons. --- PREFERENCES PAGE --- PARENTAL Select suitable par en...
Page 28 - DEFAULTS
28 SETUP --- PREFERENCES PAGE --- DEFAULTS Select reset to revert to factory initialsettings. RESET TV TYPE AUDIO SUBTITLE DISC MENU PARENTAL PASSWORD DEFAULTS SMART NAV MAIN PAGE NO MENU WITH MENU TV TYPE AUDIO SUBTITLE DISC MENU PARENTAL PASSWORD DEFAULTS SMART NAV MAIN PAGE --- PREFERENCES PAGE -...
Page 29 - DEFAULTS TABLE
DEFAULTS TABLE General Setup TV Display Normal/LB PIC Mode AUTO Angle Mark ON OSD Language English Captions ON SCR Saver ON Speaker Setup Downmix Stereo Audio Setup Audio Out SPDIF/RAW OP Mode Line Out Dynamic FULL LPCM Output LPCM 96K Preferences TV Type AUTO Audio English Subtitle English DISC Men...
Page 30 - TROUBLE SHOOTING
TROUBLE SHOOTING If it appears that your DVD unit is faulty,first consult this checklist. It may be thatsomething simple has been overlooked. Under no circumstances should youtry to repair the player yourself, as thiswill invalidate the warranty. Onlyqualified service personnel canremove the cover o...
Page 31 - BUTTONS DO NOT WORK
TROUBLE SHOOTING BUTTONS DO NOT WORK Turn the player off and on with thepower on/of f button on the front of theplayer.Press Reset button on the front of theDVD unit. 31 Check if the audio format of theselected audio language matches yourreceiver's capabilities.
Page 32 - SPECIFICATIONS; DVD; improvements in technology.
SPECIFICATIONS DVD Supply voltage : 12V DC (11V-15V), test voltage 14.4V, negative ground Current consumption : Less than 2A Signal system : Compositive video 1.0Vp-p 75 Discs played : (1) DVD-VIDEO disc 5" (12 cm) single-sided, single-layer5" (12 cm) single-sided, double-layer (2) Compact d...
