PVI Industries Gas-Fired Water Heater - Manual
PVI Industries Gas-Fired Water Heater – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
See complete warranty and/or service policy for details
PLATINUM
®
CONDENSING GAS-FIRED WATER HEATER
POLYSHIELD
®
POLYMER-LINED TANK
PVI reserves the right to change
the design and specification
without notice.
PV6801 10/08
PVI INDUSTRIES, LLC
FORT WORTH, TEXAS 76111
(800) 784-8326
▪
(817) 335-9531
▪
www.pvi.com
STANDARD FEATURES AND EQUIPMENT
•
POLYSHIELD
®
polymer-lined tank with 5-year warranty
•
Five-year heat exchanger warranty
•
One-year cost-free service policy
•
Factory authorized startup
•
Up to 94% thermal efficiency
•
Electronic temperature control with LED readout; accurate to
±
1°F
•
Removable heat exchanger with non-ferrous waterside construction and solid copper fire tubes
•
100% submerged combustion
•
Heat exchanger ASME stamped for 160 psi operating pressure
•
Storage tank ASME stamped for 160 psi operating pressure and National Board of Pressure Vessels Registered
•
Nonferrous, removable fittings at all tank connections
•
Fan assisted, pre-mix, stainless steel burner
•
Two safety shut off valves (single body)
•
NOx emission levels compliant with SCAQMD
•
Air proving switch
•
Electronic combustion sequencer and safeguard with pre-purge
•
Operating thermostat
•
Redundant high limits with automatic reset
•
ASME-rated temperature and 150 psi pressure relief valve
•
Drain valve
•
Fiberglass insulated tank
•
Durable, corrosion-resistant, polyethylene jacket
•
Heavy-duty steel stand
•
Support stand is designed to allow tank to be rotated to horizontal position for heat exchanger removal
•
23"-diameter tank access after heat exchanger removal
•
ASHRAE 90.1 compliant for thermal efficiency and standby loss
•
UL listed for PVC venting material
•
UL listed for zero clearance from combustible walls (non-combustible floor only)
•
UL listed for NSF-5 compliance
•
FM compliant
OPTIONAL FEATURES AND EQUIPMENT
Electronic low water cutoff
Manual-reset, immersion temperature limiting device
Air intake assembly for remote combustion air (requires field connection to ductwork supplied by others)
Water pressure gauge
L.P. gas operation
Condensate neutralization system
CSD-1 and IRI compliant components (includes manual reset electronic low water cut off and manual reset
temperature limiting device)
AGA-rated temperature and pressure relief valve
Tridicator (field installed)
Lifting attachments
Other agency compliance _______________________ (consult factory)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
