Puretec X4 - User Manual
Puretec X4 Faucet – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Puretec Customer Service; your nearest Puretec stockist.; Service Helpline; Operation; Cartridge Replacement
- Page 3 – Puretec X3 / X4 Series | Inline Undersink Water Filter System; Replacement cartridge code for; Suitable location for faucet.; Installation Procedure; and also the drainage of any spills. Then drill a; Installation
- Page 4 – Installation Guide; Restore the water supply and check for leaks.; Cartridge Installation/Changeout; Caution
- Page 5 – Assembly; FIGURE 1; HOW TO USE QUICK CONNECT FITTINGS; Figure 2
- Page 6 – Faucet Connections; Figure 3
- Page 7 – Performance Data
- Page 8 – Warranty
AS/NZS 3497
Licence No. WM 74617
Australian Certification
Services
NOV2018
User Guide
Inline Undersink Water Filter System
Puretec X3 / X4
For correct operation & installation it is essential to observe these instructions.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Installation & Operation Manual Copyright © Puretec Pty Ltd 2018 Puretec Customer Service Thank you for purchasing a Puretec inline undersink water filter system. Your system is a proven performer manufactured from only quality materials and components and will give years of ‘spring fresh’ wat...
3 Puretec X3 / X4 Series | Inline Undersink Water Filter System When replacing cartridge, ensure you reset the LED reminder light by removing/replacing the battery from the rubber seat. Please refer to page 6 for a detailed diagram. Replacement cartridge code for X3 model : Puretec IL149Q Replacemen...
4 Installation & Operation Manual Copyright © Puretec Pty Ltd 2018 Installation Guide 8. Fit tubing into connectors (for quick-connect fittings see Fig 2). Allow slack in the tubing. 9. Restore the water supply and check for leaks. 10. Run the system for at least 5 minutes to remove carbon fines...
