Puretec SPARQ-H2 - User Manual

Page 2 - Specifications

2 Installation & Operation Manual Copyright © Puretec Pty Ltd 2019 AUSTRALIA Customer Service: 1300 140 140 Email: [email protected] Web: www.puretec.com.au NEW ZEALAND Customer Service: 0800 130 140 Email: [email protected] Web: www.puretec.co.nz What's Inside What's Inside Puretec Customer Ser...

Page 3 - Sparq H2 User Guide; Introduction; Puretec Customer Service; The system is designed for metropolitan supply water only.; Installation Record; For future reference, fill in the following data:

3 Sparq H2 User Guide Introduction Puretec Customer Service Thank you for purchasing a Puretec Drinking Water Appliance. Your system is a proven performer, manufactured from only quality materials and components. It will give years of reliability and trouble‑free operation if maintained properly. Th...

Page 4 - Before Installation; adequate disinfection before or after the system.; Parts Included

4 Installation & Operation Manual Copyright © Puretec Pty Ltd 2019 Before Installation Read this user guide completely and check if there is adequate space where you want to install the unit, to mount all of the components. Refer to page 5. Caution: Do not use with water that is microbiologicall...

Page 5 - Adapter; Operating Water Pressure:; Dimensions

5 Sparq H2 User Guide A Ø35mm hole required for faucet. Note: All dimensions are expressed in millimetres. Adapter Pressure Regulator CO2 Tube CO2 Bottle Note: Ensure there is adequate ventilation available through the cupboard. If there is inadequate ventilation, and the cupboard temperature rises ...

Page 6 - Safety Instructions & Requirements; Important Information; including the following:

6 Installation & Operation Manual Copyright © Puretec Pty Ltd 2019 Safety Instructions & Requirements Important Information IMPORTANT! This hot water dispenser produces instant hot water of 60 o C - 98 o C (temperature inside of tank) as dispensed from the faucet. • This product is not inten...

Page 7 - Requirements & Overview; Electrical Requirements; qualified electrician to install one.; Pressure Free Hot Water Dispenser Concept; household water heater, the faucet valve is placed after the; Overview; Important: Observe all governing code and ordinances.

7 Sparq H2 User Guide Requirements & Overview Electrical Requirements • For your personal safety, the hot water dispenser is equipped with a power supply cord having a 3‑prong ground plug. To minimise possible shock hazard, the cord must be plugged into a mating 3‑prong, ground type outlet, grou...

Page 8 - Typical Installation

8 Installation & Operation Manual Copyright © Puretec Pty Ltd 2019 Typical Installation 1 (COLD) Water Inlet Connection 2 Smart Tee (KSAV47) 3 1/4" White Tube (KTU4W‑2) 4 MultiValve 5 Reducer KRR64 6 Z1 Ultra Z Filtration System 7 1/4" Tube (Blue Filtered Water Line) 8 1/4" Tube (Whi...

Page 9 - Installation; Before You Begin; water line and connect the Smart Tee; . Reinstall the previous connections to the tee

9 Sparq H2 User Guide Installation Before You Begin • Determine where you will install your hot water dispenser. The faucet can be mounted in an existing hole in the sink, or drill a 35 mm hole in your sink or bench top. • Stainless Steel: You need a 35 mm screw punch available at most hardware stor...

Page 10 - Connect the White Tank Inlet Line hose to the rear top corner

10 Installation & Operation Manual Copyright © Puretec Pty Ltd 2019 Installation 8. Install Faucet : To install faucet, place the small rubber washer, dress ring (chrome washer) and large rubber washer onto the threaded end of the faucet. Insert the faucet into the hole in the sink or bench. Sli...

Page 11 - Press down the safety locker to release safety lock.; Cleaning and Maintenance; Unplug dispenser tank to power supply.

11 Sparq H2 User Guide Operation, Cleaning & Maintenance Important Information This dispenser is equipped with a self re‑setting thermal fuse. Turn the thermostat to OFF position and fill tank with water before plugging the power cord from the tank into an electrical outlet. If tank is empty and...

Page 12 - Cartridge Replacement; Place container under filter in case of drips.; Troubleshooting; Water is not hot; Maintenance & Troubleshooting

12 Installation & Operation Manual Copyright © Puretec Pty Ltd 2019 4. Place a 3 L container under the drain plug at bottom of the tank. Use a screwdriver to remove the screw and 0‑ring in the drain tube opening. When tank is fully drained replace 0‑ring and screw. Tighten to reseal the drain. B...

Page 13 - continuous flow of hot water.

13 Sparq H2 User Guide Maintenance & Troubleshooting • If the water boils, turn thermostat control dial slightly counterclockwise until the gurgling and/or "sputtering" stops. This should take place within 20 seconds. Turn control dial an additional 3mm counterclockwise at the tip of the...

Page 14 - WARRANTY; Warranty

14 Installation & Operation Manual Copyright © Puretec Pty Ltd 2019 WARRANTY Any claim under this warranty must be made within 2 years of the date of purchase of the product. 2 year warranty is 1 year parts and labour, plus 1 year parts only. Excludes cartridges. To make a claim under the warran...

Page 15 - WARRANTY / NEW ZEALAND

15 Sparq H2 User Guide Warranty WARRANTY / AUSTRALIA This warranty is given by Puretec Pty Ltd, ABN 44 164 806 688, 37‑43 Brodie Road, Lonsdale, SA 5160, telephone no. 1300 140 140 and email at [email protected]. This warranty is provided in addition to other rights and remedies you have under law: ...

Puretec SPARQ-H2 - User Manual

Table of Contents:

Summary

Other Puretec Faucets Models