Promise Technology SX4000 Lite - Manual
Promise Technology SX4000 Lite – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Step 1: Unpack Your FastTrak Card; Note
- Page 4 – Step 2: Memory Module Test
- Page 5 – Step 3: Install the FastTrak Card; Insert the FastTrak card into an open PCI slot.
- Page 6 – Step 4: Install the Hard Drives; Important; Caution
- Page 8 – Step 5: Create Your Disk Array
- Page 11 – Step 6: Install Software Drivers
FastTrak
SX4000 Lite
Quick Start Guide
Version 3.4
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Quick Start Guide 3 Step 1: Unpack Your FastTrak Card When you receive the FastTrak SX4000 Lite, the package should contain the items listed below: • FastTrak SX4000 Lite Controller Card • Quick Start Guide • FastTrak SX4000 Lite driver diskette • Four Internal 18 inch (46 cm) Ultra ATA, 80-wire/40-...
FastTrak SX4000 Lite 4 Step 2: Memory Module Test The FastTrak SX4000 Lite RAID Controller card ships without a Dual Inline Memory Module (DIMM) for Synchronous Dynamic Random Access Memory (SDRAM). A DIMM of 64 MB to 256 MB capacity must be installed in order for the FastTrak Card to function. The ...
Quick Start Guide 5 Step 3: Install the FastTrak Card The FastTrak RAID Controller card fits into any available: • 33-MHz, 32-bit PCI slot (must be PCI 2.2 compliant) • The 33-MHz, 32-bit portion of a 64-bit PCI slot on the PC’s motherboard (see Figure 1 below). 1. Remove the cover of your system. 2...
