Powerware 9170+ - Manual
Powerware 9170+ – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
1018946 Rev. A
1/2
Relay Interface Card for Powerware 9120 and 9170+
General
This Relay Interface Card (p/n 1014018) provides potential free true relay interface for AS/400 and other
relay connected computers and industrial applications. This relay interface uses a 15-pin D-sub connector
and this Relay Interface Card is installed in the slot on rear panel of the UPS.
Installation
The UPS does not have to be shut down when installing this Relay Interface Card.
1.
Remove the cover on the option slot on the back of UPS to install the Relay Interface Card.
2.
Put the Relay Interface Card into the slot and attach it to the rear panel by using the screws removed.
The following information is available from the Relay Interface Card:
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
