Polk Audio LC265i - Manual
Polk Audio LC265i – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
w w w . P o l k A u d i o . c o m
/
8 0 0 . 3 7 7 . 7 6 5 5 ( U S A & C a n a d a )
/
4 1 0 . 3 5 8 . 3 6 0 0 ( W o r l d w i d e )
1
LC265
i
-IP Hardware (included)
• One LC265
i
-IP speaker
• Performance Optimization Wizard – CD-ROM
• Euro-style (Phoenix) power supply connector
• Mounting template
• Paint mask
• Weather-resistant aluminum grille
and stainless steel hardware
• LC
i
-IP manual
• Laminated configuration setup card
• Registration card
Note:
If you are setting up LC
i
-IP speakers to be controlled via an
IP-network such as NetStreams
™
Digilinx
™
, purchase a network card, which
is sold separately, from NewStreams
™
. The network card will control up to
one pair of speakers.
Important Note:
If anything is missing or damaged, or if your LC
i
-IP speaker
fails to operate, notify Polk Audio Installer Support Services immediately at
800-377-7655. Hours: Mon-Fri, 9am - 5:30pm EST.
Accessories (not included)
• Performance Enclosure for exact volume enclosure performance
in pre-build installations. Improves bass performance and
sound isolation. Model number: ENCL265.
• Speaker-level-to-line-level transformer, such as the PAC
SNI-35
.
(For analog installations only. Powers up to 2 each LC265
i
-IP speakers.)
• SPS-1 Power Supply (a power supply is required).
THIS DOCUMENT APPLIES TO LC265
i
-IP AND LC80
i
-IP PRODUCTS
Cutsheet for LC265
i
-IP/LC80
i
-IP
World’s First Active High Performance IP Addressable Loudspeakers
Polk Audio LC
i
-IP Ultra High Performance In-Wall/ In-Ceiling Loudspeakers are the world’s first active Internet Protocol-ready Loud-
speakers. They were created for IP networked systems (such as the ground-breaking NetStreams
™
DigiLinx
™
system). Integrated digital
amplifiers eliminate remote amplifiers connected via hundreds of feet of performance-robbing speaker wires. The built-in Digital
Signal Processor (DSP) and supplied Room Correction Software (the Performance Optimization Wizard
™
) enable every LC
i
-IP speaker
to be optimized for maximum performance in any room. While the LC
i
-IP Series provides the greatest functionality when used
within an IP-based system, these speakers are also compatible with any analog distributed audio system.
Cutout
Dimension
19 1/4"
(48.9 cm)
Cutout
Dimension
7 1/4"
(18.4 cm)
Total
Depth
3 9/16"
(9.1 cm)
LC265
i
-IP Dimensions
Overall Height
20 7/8" (55.5cm)
Overall Width
8 1/2" (30.4cm)
Available Finish: Paintable White
LC265
i
-IP Performance Enclosure Dimensions
55 5/8" H x 14" W x 3 3/8" D (141.3cm x 35.6cm x 8.6cm)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
