Polk Audio 650 - Manual
Polk Audio 650 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 4 – PLACEMENT; NEVER LAY; If you elect to use the; OK; Driver Side
- Page 6 – Figure 6; Pro Logic
- Page 8 – HOW TO TELL IF
- Page 10 – SUBWOOFER ADJUSTMENTS; AC POWER
- Page 12 – SPECIFICATIONS
- Page 14 – POLK AUDIO LIMITED WARRANTY; Amplifier; in this Polk; To allow Polk
- Page 15 – I n s t r u c t i o n
PSW S
ER
IE
S
PSW650
I n s t r u c t i o n
M a n u a l
5601 METRO DRIVE,
BALTIMORE, MARYLAND 21215, USA,
410-764-5275, FAX: 410-764-5266
http://www.polkaudio.com
RM1006-1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Strip 1/2" of insulation from each of thetwo conductors on both ends to exposethe bare wire. Twist the exposed wire of each conductor to form two un-frayedstrands. Connect two conductors to thereceiver or amp (refer to the owner’smanual supplied with your electronicsfor assistance with proper ho...
The “high pass crossover” switch (Figure 5) on the PSW650 gives you the option of filtering bass from yourmain front speakers for the purpose of increasing power handling and lowering distortion at high volume levels. If you are using small front main speakers, select “80Hz.” For large floor-standin...
If the subwoofer output jack is filtered,we suggest using hook up OPTION #1 or #2 . If it is unfiltered, connect the subwoofer output jack to either of theline level “IN” jacks (Figure 8) . With Dolby Digital systems, select subwooferas “on” or “yes” in the “speaker set up” or “bass management” func...
