Plantronics W730-M - Manual

Savi

®

W730-M

Multi Device Wireless
Headset System

Guide de démarrage rapide
Guía de inicio rápido
Guia de Início Rápido

QUICK START GUIDE

VIDEO GUIDE

http://docs.plantronics.com/savi-700

1 Increase volume/flash button

Increase volume

Short press +

Flash

While on call, long press volume up + for 1.5 seconds, will

put call on hold and answer another.

2 Decrease volume/mute button

Decrease volume

Short press –

Mute

Press volume down – for 1.5 seconds

3 Call control button

Answer/end call

Short press

CAUTION

For your safety, do not use headset at high volumes

for extended periods of time. Doing so can cause hearing loss.
Always listen at moderate levels. For more information on
headsets and hearing visit plantronics.com/healthandsafety.

Please refer to the separate safety instructions for important product
safety information prior to installation or use of the product.

Savi W730 has a WO2 base and a WH210 headset.

1

Headset

Customize and Charge

1

Attach charge cradle to base.

2

Plug one end of power supply into power jack on back of the base and
other end into working power outlet.

3

To charge, dock headset in base, minimum of 20 minutes.

NOTE

This product has a non-replaceable battery. Contact Plantronics for

replacement information.

2

Desk Phone

Connect and Call

1

Choose desk phone setup

A, B, or C

and connect cables.

A

Desk phone (standard)

USE

B

Desk phone + HL10 lifter (sold separately)
See user guide at plantronics.com/accessories

USE

C

Desk phone + EHS cable (sold separately)
See user guide at plantronics.com/accessories

USE

2

While wearing headset, short press base desk phone button.

NOTE

If you don't have remote call control through a lifter (HL10) or cable

(EHS), manually remove desk phone handset before each call.

3

If you do not hear a dial tone, open side panel and adjust middle
configuration switch (A–G) until you do. Default setting

A

works for

majority of desk phones.

4

Dial test call from desk phone.

5

End call by pressing headset call control button.

3

Mobile

Connect and Call

1

Press down and hold Bluetooth pairing button (4 seconds) on Savi
base until indicator LED flashes red and blue.

2

Place Bluetooth mobile phone into search mode. Select

SAVI 7xx

from

the list of found devices.

3

If prompted by mobile phone, type

0000

as passcode.

Bluetooth indicator LED on base will turn solid blue when base has an
active connection with mobile phone.

4

While wearing headset, short press base mobile button.

5

Dial test call from mobile phone.

6

End call by pressing headset call control button.

4

Computer

Connect and Call

1

Connect USB cable.

2

While wearing headset, short press base computer button.

3

Dial test call from computer softphone.

4

End call by pressing headset call control button.

NEED MORE HELP?

Product support

plantronics.com/support

Online user guide

http://docs.plantronics.com/savi-700

NEED MORE HELP?

Technical support

plantronics.com/support

Online user guide

http://docs.plantronics.com/savi-700

Savi W730 has a WO2 base and a WH210 headset.

86108-05 (04.11)

Guía de inicio rápido
Guide de démarrage rapide

quick sTaRT guiDE

Savi

®

W730-M

Multi-Device Wireless
Headset System

ViDEO guiDE

http://docs.plantronics.com/savi-700