Plantronics W720-M - Manual

1 Electronic hookswitch cable (EHS cable) Electronically and automatically takes your deskphone handset off hook. Enables remote call control with your headset. 2 HL10 lifter Automatically lifts handset and returns it to the cradle. Enables remote callcontrol with your headset. Accessories 7

Optimize the comfort and fit of your headset. 1 To adjust the headband, lengthen or shorten the band until it fits comfortably. Position theheadset receivers so that the foam cushions sit comfortably over the center of your ears. 2 On the WH300, position the stabilizer T-bar above your ear. 3 For a ...

1 Align the charging cradle pins with the base and press firmly until the cradle rests evenly on thebase. 2 Plug one end of power supply into power jack on back of the base and other end into workingpower outlet. 3 Place the headset in the charge cradle. The charging LED will flash green when chargi...

Choose a desk phone setup A, B or C and connect cables. A Desk phone (standard) USE • Connect one end of the telephone interface cable to the back of the base • Disconnect the handset coil cord from the base of the desk phone and re-connect it to the telephone interface cable junction box. • Finally...

Your mobile phone can be paired to multiple headsets and hands-freedevices, but it can only be connected to one device at a time. Following areinstructions for pairing your mobile phone to the base. 1 Press down and hold Bluetooth pairing button (4 seconds) on Savi base until indicator LEDflashes re...

Connect the USB cable. 1 While wearing your headset, short press the base computer button. 2 Dial a call from your computer softphone. 3 End the call by pressing the headset call control button. The minimum recommended separation between your desk phone and the base is 6 inches. The minimum recommen...

Now that you’ve assembled your headset, installed the software andconnected your phones, read this section to learn about the headsetfeatures, how to use the controls and more. 1 Headset LED Flashes white when in use 2 Volume up button Press to increase volume 3 Call control button Press to place, a...

This section describes the base, its buttons and their functions. Basics When you press on a base button, you are opening a phone line/audio channel. Depending onthe circumstances, you won’t necessarily hear a dial tone until you’ve dialed from your phone.The base buttons allow you to switch to a di...

Answer a Call The easiest way to answer an incoming call from the desk phone, mobile phone, or computer isto press the headset call button when you hear an incoming call. Alternatively, you can answer an incoming call by pressing the base button for the line that isringing. NOTE If you don't have re...

User preferences and device settings that affect the performance of yourheadset can be changed using the Plantronics Control Panel. To access the Plantronics Control Panel, load Plantronics software by visiting plantronics.com/software and click on download button. To start this utility, click Start...

Talk time performance issignificantly degraded even after afull recharge. Battery is wearing out. Contact us at www.plantronics.com/ support . I can’t hear a dial tone in theheadset. Make sure your headset is charged.Make sure your headset is subscribed to base. See Base Subscription Press the base ...