Plantronics DYNZ-600 Series - Manual
Plantronics DYNZ-600 Series – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Table Of Contents; Uncontrolled Document
- Page 4 – Relay Contact Rating:; Figure 1. Installation Drawing; ADDITIONAL FEATURES; OVERSPEED TRIP TESTING; Figure 2
- Page 5 – OPERATING PROCEDURE
- Page 6 – OPERATING PROCEDURE
- Page 7 – – CAUTION –; NOTE
2002 Invensys. All Rights Reserved
Technical Manual
Models
DYNZ-60010- 8 to 40 Vdc
DYNZ-60012- 59 to 88 Vdc
DYNZ-60013- 8 to 40 Vdc
Electronic Speed Switch
F-23371
Barber-Colman DYNA Products
P.O. Box 2940
1354 Clifford Avenue
Loves Park, IL 61132-2940
USA
Tel: + 1 815 637 3000
Fax: + 1 815 877 0150
www.dynaproducts.com
Uncontrolled Document
For
H
istorical
Reference Only
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2002 Invensys. All Rights Reserved Table Of Contents 1.0 Introduction 1 2.0 Specifications 1 3.0 Additional Features 2 4.0 Wiring Instructions 3 5.0 Operation and Calibration of DYNZ-60010 3 6.0 Operation and Calibration of DYNZ-60012 and DYNZ-60013 4 7.0 Troubleshooting 5 Uncontrolled Document Fo...
F-23371 Electronic Speed Switch Technical Manual Page 2 2002 Invensys. All Rights Reserved Relay Contact Rating: 10.0 amperes at 30 Vdc resistive. Overspeed Response Time: With the overspeed set at 4140 Hz and a steady input frequency of 3600 Hz, then switching the input frequency to 5000 Hz must ...
F-23371 Electronic Speed Switch Technical Manual Page 3 2002 Invensys. All Rights Reserved l Barber-Colman sets the units to operate over the adjustment range of 325 to 10,000 Hz by cutting jumper J2 only. The sensitivity of the adjustment potentiometer is approximately 480 Hz per turn. n SW1 is f...
