Plantronics B235 Manual - Free PDF Download

Page 2 - Contents

Contents Welcome 3 Featured highlights 3 System requirements for Plantronics Spokes ™ Software 3 What's in the box 4 Overview 5 Headset 5 Bluetooth USB adapter 5 The basics 6 Call controls 6 Mute 7 Adjust the volume 7 Use Smart Sensors 7 Play or pause streaming audio 7 Pair phone or tablet 8 Feature...

Page 3 - Welcome

Congratulations on purchasing your new Plantronics Voyager Legend UC wireless headsetsystem. This user guide contains instructions for setting up and using your Voyager LegendBluetooth Headset and BT300 Bluetooth USB Adapter. • Auto Answer calls by placing headset on your ear. • Auto transfers calls...

Page 5 - Overview

voice Call button Volume button Indicator light (LED) Power button Snap-fit magnetic charge connection Mute button Voice button Play/Pause button Indicator light (LED) Overview Headset Bluetooth USB adapter 5

Page 6 - The basics

voice Answer a call Choose: • Tap the Call button • Put headset on (Smart Sensor) • Say "answer" when prompted (mobile phone only) Answer a second call Choose: • Tap the Call button to end current call, then tap the Call button again to answer the second call. • Or, for mobile calls, tap the...

Page 8 - Pair phone or tablet

Pair your headset to your phone or another device, such as a tablet. 1 Switch on your headset then choose: • Tap the Voice button and say “Pair mode,” or • Press and hold the Call button until you hear “Pairing” 2 While the headset LEDs are flashing red and blue, activate Bluetooth ® on your phone a...

Page 9 - Features

Your Voyager Legend headset can play media files (music, podcasts, navigation, etc.) from anyA2DP (Advanced Audio Distribution Profile for Bluetooth)-enabled mobile device. Your Voyager Legend Bluetooth headset has a 10 metre effective range. Voice prompts fromyour headset will alert you if you lose...

Page 11 - Fit

Replace the ear tip for a better fit. 1 Push in ear tip and rotate to the left to unlock it. 1 2 2 2 Align new ear tip into slot. 3 Push and rotate it to the right to lock it into place. 1 2 2 To wear the headset on your other ear, rotate the boom upwards then twist it around so the eartip is on the...

Page 12 - Charge

There are three ways to charge your headset. Your new headset has enough power to pair andmake a few calls before charging is needed, though you may charge it at any time. NOTE Always charge at near room temperature; never charge battery at temperatures below 0°C (32°F) or above 40°C (104°F). 1 Alig...

Page 15 - Pairing your Bluetooth USB adapter

Your Bluetooth USB adapter comes pre-paired to your Voyager Legend headset. In the event that your headset and Bluetooth USB adapter are not paired or become unpaireddo the following: 1 Remove the Bluetooth USB adapter. 2 Power on your headset then choose: • Tap the Voice button and say "Pair Mo...

Page 16 - Connect PC and call

1 Power headset on. 2 Insert Bluetooth USB adapter directly into your PC USB port. The LED will flash and then turnsolid blue to indicate the headset is connected to the USB adapter. The LED remains solid bluewhen not on an active call. NOTE Insert your Bluetooth USB Adapter directly to your laptop ...

Page 17 - Customise your headset

Your headset understands and speaks in English. You can change the language and othersettings online. MyHeadset ™ Updater ( plantronics.com/myheadset ) tool enables you to: • Receive firmware updates • Change language for voice alerts and commands (English with a UK accent, English with a US accent,...