Page 3 - After you have finished reading the instructions, keep this man-; Before You Start; English; Contents
Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operateyour model properly. After you have finished reading the instructions, keep this man- ual in a safe place for future reference. Before You Start About this unit 6 Operating envi...
Page 6 - About this unit; CAUTION; CLASS 1 LASER PRODUCT; About WMA
If you want to dispose this product, do not mixit with general household waste. There is a se-parate collection system for used electronicproducts in accordance with legislation that re-quires proper treatment, recovery and recy-cling. Private households in the 25 member states ofthe EU, in Switzerl...
Page 7 - Operating environment; Visit us at the following site:; In case of trouble; The front panel can be detached to deter theft.
About AAC AAC is short for Advanced Audio Coding andrefers to an audio compression technologystandard used with MPEG 2 and MPEG 4.Several applications can be used to encodeAAC files, but file formats and extensions dif-fer depending on the application which isused to encode.This unit plays back AAC ...
Page 8 - Important; Removing the front panel; Resetting the microprocessor; If the unit fails to operate properly; About the demo mode
! You can turn off the warning tone. See Switching the warning tone on page 49. ! You can turn off the face auto open. See Switching the face auto open on page 49. Important ! Handle gently when removing or attachingthe front panel. ! Avoid subjecting the front panel to excessiveshocks. ! Keep the f...
Page 9 - Reverse mode; Installing the battery; WARNING; Use only one; Using the remote control
Important The red lead (ACC) of this unit should be con-nected to a terminal coupled with ignition switchon/off operations. If this is not done, the vehiclebattery may be drained. Reverse mode If you do not perform an operation withinabout 30 seconds, screen indications start toreverse, and then con...
Page 10 - Head unit; Press to reset the microprocessor.; Remote control; Press to increase or decrease the volume.; Operating this unit
What ’ s What Head unit 1 SOURCE button This unit is turned on by selecting a source.Press to cycle through all the availablesources. 2 MULTI-CONTROL Move to perform manual seek tuning, fastforward, reverse and track search controls.Also used for controlling functions.Turn to increase or decrease th...
Page 11 - Basic Operations; Turning the unit on; Selecting a source; Notes
d FUNCTION button Press to select functions. e Joystick Move to perform manual seek tuning, fastforward, reverse and track search controls.Also used for controlling functions.Functions are the same as MULTI-CONTROL except for volume con- trol.Press to display the disc title list, track titlelist, fo...
Page 12 - Adjusting the volume; Use MULTI-CONTROL to adjust the; Tuner; This unit; LOC
! External unit refers to a Pioneer product (suchas one available in the future) that, althoughincompatible as a source, enables control ofbasic functions by this unit. Two external unitscan be controlled by this unit. When two exter-nal units are connected, the allocation ofthem to external unit 1 ...
Page 13 - Press; Note; Turn to change the station press to select.
Non-RDS or MW/LW 1 Band indicator 2 Stereo ( 5 ) indicator Shows when the selected frequency is beingbroadcast in stereo. 3 LOC indicator Shows when local seek tuning is on. 4 Preset number indicator 5 Frequency indicator 1 Press SOURCE to select the tuner. 2 Press BAND to select a band. Press BAND ...
Page 14 - Tuning in strong signals
Introduction of advancedoperations 1 Press MULTI-CONTROL to display the main menu.FUNCTION , AUDIO and ENTERTAINMENT appear on the display. 2 Use MULTI-CONTROL to select FUNCTION. Turn to change the menu option; press to se-lect.The function name appears on the display. 3 Turn MULTI-CONTROL to selec...
Page 15 - Using PI Seek; If the tuner can; Using Auto PI Seek for preset stations; Switching Auto PI Seek; To turn the regional function off, press; Receiving traffic announcements; s TP station (a station; To turn traffic announcements standby off,; is
Notes ! Only RDS stations are tuned in during seektuning or BSM when AF is on. ! When you recall a preset station, the tunermay update the preset station with a new fre-quency from the station ’ s AF list. No preset number appears on the display if the RDSdata for the station received differs from t...
Page 16 - Using PTY functions; Not found; Using news program interruption; NEWS OFF; Receiving PTY alarm broadcasts; Using radio text; Displaying radio text
Notes ! You can also turn the TA function on or off inthe menu that appears by using MULTI-CONTROL . ! The system switches back to the originalsource following traffic announcement recep-tion. ! Only TP and enhanced other network ’ s TP sta- tions are tuned in during seek tuning or BSMwhen TA is on....
Page 17 - Storing and recalling radio text; PTY list
1 Press DISPLAY and hold to display radio text. Radio text for the currently broadcasting sta-tion is displayed. # You can cancel radio text display by pressing DISPLAY or BAND . # When no radio text is received, No text ap- pears in the display. 2 Push MULTI-CONTROL left or right to recall the thre...
Page 18 - indicator; VBR
Others Educate Educational programs Drama Radio plays and serials Culture National or regional cul-ture Science Nature, science and tech-nology Varied Light entertainment Children Children ’ s Social Social affairs Religion Religious affairs or ser-vices Phone In Phone in Touring Travel programs; no...
Page 19 - Be sure to turn up the label side of a disc.; Push MULTI-CONTROL up or down to; Searching ever y 10 tracks in the current; To skip back or forward to another; Selecting a track directly; Track number input display appears.
Disc loading slot 2 Insert a CD (CD-ROM) into the disc load- ing slot. Front panel is closed automatically, and play-back will start. # Be sure to turn up the label side of a disc. # After a CD (CD-ROM) has been inserted, press SOURCE to select the built-in CD player. # You can eject a CD (CD-ROM) b...
Page 20 - Selecting a repeat play range; Scanning folders and tracks
2 Press 0 to 9 buttons to enter the desired track number. # You can cancel the input number by pressing CLEAR . 3 Press DIRECT. The track of entered number will play. # After entering the number input mode, if you do not perform an operation within about eightseconds, the mode is automatically cance...
Page 21 - Scan mode; Pausing disc playback; Rough search; Using disc title functions; Entering disc titles
Refer to Selecting a repeat play range on the previous page. 1 Use MULTI-CONTROL to select Scan mode in the function menu. 2 Press MULTI-CONTROL to turn scan play on. The first 10 seconds of each track is played. 3 When you find the desired track press MULTI-CONTROL to turn scan play off. # If the d...
Page 22 - For title entered CD
4 Push MULTI-CONTROL up or down to select a letter of the alphabet. 5 Push MULTI-CONTROL left or right to move the cursor to the previous or nextcharacter position. 6 Move the cursor to the last position by pushing MULTI-CONTROL right after enter-ing the title. When you push MULTI-CONTROL right one ...
Page 23 - NO FILES
Selecting tracks from the tracktitle list Track title list lets you see the list of track titleson a CD TEXT disc and select one of them toplay back. 1 Press LIST to switch to the track title list mode. 2 Use MULTI-CONTROL to select the de- sired track title. Turn to change the track title; press to...
Page 24 - Playing songs on iPod; SOURCE; Browsing for a song; playlist plays all songs in your iPod.
Playing songs on iPod Basic Operations You can use this unit to control an iPod byusing a cable (e.g., CD-I200), which is sold se-parately. 1 Song number indicator 2 Play time indicator 3 Song time (progress bar) 1 Connect the iPod to this unit. Playback will automatically start.While the iPod is co...
Page 25 - Repeating play
# To return to the previous list, push MULTI-CONTROL left. # To go to the top menu of the list search, push and hold MULTI-CONTROL left. # Podcasts and Audiobooks are displayed when the connected iPod is compatible with thecategories. # If you do not operate the list within about 30 seconds, the lis...
Page 26 - Pausing a song
1 Use MULTI-CONTROL to select Shuffle mode in the function menu. 2 Press MULTI-CONTROL to select your fa- vorite setting. ! Shuffle Songs – Play back songs in a ran- dom order within the selected list ! Shuffle Albums – Select an album ran- domly, and then play back all the songs in itin order ! Shu...
Page 27 - Bluetooth Audio; Refer to; BT Audio
Bluetooth Audio Basic Operations You can use this unit to control a separatelysold portable audio player featuring Bluetoothwireless technology (Bluetooth audio player). Important ! This unit can control a Bluetooth audio playervia A2DP or AVRCP profile. Bluetooth audioplayers (or Bluetooth adapters...
Page 28 - Entering PIN code for Bluetooth wire-
2 Connection To connect your Bluetooth audio player to thisunit, refer to Connecting the most recently con- nected Bluetooth audio player on the next page and Connecting a Bluetooth audio player on this page. # Once connected via Bluetooth wireless tech- nology, “ Play ” , “ Stop ” and “ Pause ” on ...
Page 29 - is displayed. The Bluetooth; Stopping playback; Playback of the current song stops.; Playback of the current song pauses.; To turn pause off, press; source or; To turn automatic connection off, press
Note Before you can use audio players you may needto enter the PIN code into this unit. If your playerrequires a PIN code to establish a connection,look for the code on the player or in its accompa-nying documentation. Enter the PIN code refer-ring to Entering PIN code for Bluetooth wireless connect...
Page 30 - You can edit the device name. Refer to; Push MULTI-CONTROL left to switch to; Pushing; Bluetooth Telephone; Introduction; User number indicator
Displaying BD (BluetoothDevice) address 1 Use MULTI-CONTROL to select Device info. in the function menu. The device name (e.g., Pioneer BT unit ) of this unit appears in the display. # You can edit the device name. Refer to Editing device name on page 52. 2 Push MULTI-CONTROL left to switch to the B...
Page 31 - About the telephone source; Standby mode; Press SOURCE to select the telephone.; TEL; Setting up for hands-free phoning; Connection
Shows the registration number of the cellularphone. 4 Battery strength indicatorShows the battery strength of cellular phone. ! Battery strength indicator may differfrom the actual battery strength. ! If the battery strength is not available,nothing is displayed in the batterystrength indicator area...
Page 32 - Making a phone call; Dial a number; No data; Voice recognition; No voice dial; Taking a phone call; Answering an incoming call; OFF HOOK
2 Registration To register your temporarily connected phone,refer to Registering connected cellular phone on page 35. 3 Volume adjustment Adjust the earpiece volume on your cellularphone for comfort. When adjusted, the volumelevel is memorized in this unit as the defaultsetting. # Caller ’ s voice v...
Page 33 - Rejecting an incoming call; Setting; Using the Call History; Answering a call waiting; connection and registration status.
2 To end the call, press PHONE. The estimated call time appears in the display(this may differ slightly from the actual calltime). # You can also end the call by pressing ON HOOK on the remote control. # You may hear a noise when you disconnect the phone. Rejecting an incoming call You can reject an...
Page 34 - Connecting a cellular phone; Registering connected cellular; Searching for available cellular phones
Search&Connect (search and connect) — Connection open (connection open) — Connect phone (connect phone) — Delete phone (delete phone) — PH.B.Transfer (phone book transfer) — Refuse calls (auto- matic reject setting) — Auto answer (auto- matic answer setting) — Ring tone (ring tone select) — Auto...
Page 35 - Disconnecting a cellular phone; After the disconnection is completed,; When the registration is completed,
# The link code is set to 0000 as default. You can change this code in the initial setting. Referto Entering PIN code for Bluetooth wireless con- nection on page 52. Using a cellular phone to initiate aconnection Putting the unit in Connection open mode al- lows you to establish a Bluetooth wireless...
Page 36 - Deleting a registered phone; is displayed. Deleting phone is; After the connection is completed,; Auto connect; ing to a registered phone manually
Deleting a registered phone If you no longer need to use a registeredphone with this unit, you can delete it from theregistration assignment for another phone. ! If a registered phone is deleted from thisunit, the Phone Book and other settings ofthat phone are cleared simultaneously. 1 Use MULTI-CON...
Page 37 - Using the Phone Book; Transferring entries to the Phone Book; With; Changing the Phone Book display order
! This feature is not possible if you are play-ing back songs on your Bluetooth audioplayer via Bluetooth wireless technology. Insuch case, stop the playback and switch toanother source for your cellular phone toconnect to this unit through this function. ! While you are operating in the functionmen...
Page 38 - Calling a number in the Phone Book; Assign genres to phone numbers; Calling a number in the
Pressing MULTI-CONTROL repeatedly changes the name view order between firstname and last name. Calling a number in the Phone Book Important To perform this operation, be sure to park your ve-hicle and apply the parking brake. After finding the number in the Phone Bookyou want to call, you can select...
Page 39 - Editing the name of a Phone Book entry; Pressing and holding; Editing phone numbers
Editing the name of a Phone Book entry Important To perform this operation, be sure to park your ve-hicle and apply the parking brake. You can edit the names of Phone Book entries.Each name can be up to 40 characters long. 1 Display the genre and phone number list of your desired Phone Book entry. S...
Page 40 - Clearing a Phone Book entry; Clearing memor y; Displaying the Call History; Using the
6 Press MULTI-CONTROL to store the new number. Clearing a Phone Book entry Important To perform this operation, be sure to park your ve-hicle and apply the parking brake. You can delete Phone Book entries in thePhone Book one by one.To clear all of your entries in the Phone Book,refer to Clearing me...
Page 41 - DISPLAY; Calling a number from the Call History; Displaying the Call Histor y; Assigning preset numbers
# You can scroll the name and phone number by pressing and holding DISPLAY . # If you do not operate anything within about 30 seconds, the list display is canceled automati-cally. Calling a number from the Call History 1 Display the list and select a phone num- ber. Display the phone number you want...
Page 42 - Clearing memory; If you want to clear all the Phone Book,; Setting the automatic rejecting; To turn automatic call rejection off, press; Setting the automatic answering; To turn automatic answering function off,
5 Press MULTI-CONTROL again to make a call. 6 To end the call, press PHONE. Clearing memory You can clear memory of each item; PhoneBook, dialled/received/missed call history listand preset phone number. 1 Use MULTI-CONTROL to select Clear memory in the function menu. 2 Push MULTI-CONTROL up or down...
Page 43 - To turn echo canceling off, press; Displaying BD address of this unit; Selecting the incoming call screen
Changing the ring tone The unit offers a choice of ring tones for in-coming calls, as well as an Off setting. ! The ring tone you select for this unit has noeffect on the ring tone used by your phone.If you do not want your phone and this unitto ring at the same time, we recommendyou turn the ring t...
Page 44 - Audio Adjustments; Introduction of audio adjustments; AUDIO; Using balance adjustment; Balance; Using the equalizer; Recalling equalizer curves
Audio Adjustments Introduction of audio adjustments 1 1 1 1 Audio displayShows the audio adjustment status. 1 Press MULTI-CONTROL to display the main menu.FUNCTION , AUDIO and ENTERTAINMENT appear on the display. 2 Use MULTI-CONTROL to select AUDIO. Turn to change the menu option; press to se-lect.T...
Page 45 - Adjusting equalizer curves; The actual range of the adjustments are differ-; Adjusting 7-band graphic equalizer; Recalling equalizer cur ves
Custom 1 Custom 1 Custom 2 Custom 2 Flat Flat SuperBass (S.Bass) Super bass ! Custom 1 and Custom 2 are adjusted equalizer curves that you create. Adjust-ments can be made with a 7-band graphicequalizer. ! When Flat is selected no supplement or correction is made to the sound. This isuseful to check...
Page 46 - You can then select another band and adjust; Adjusting loudness; To turn loudness off, press; Using subwoofer output; To turn subwoofer output off, press; Adjusting subwoofer settings; When the subwoofer output is on, you can se-; Boosting the bass
+6 to – 6 is displayed as the level is increased or decreased. # You can then select another band and adjust the level. 5 Press BAND to cancel the 7-band gra- phic equalizer adjustment. Adjusting loudness Loudness compensates for deficiencies in thelow- and high-sound ranges at low volume. 1 Use MUL...
Page 47 - Using the high pass filter; If the high pass filter has been previously ad-; Adjusting source levels; Using automatic sound levelizer; To turn ASL off, press
Using the high pass filter When you do not want low sounds from thesubwoofer output frequency range to playfrom the front or rear speakers, turn on theHPF (high pass filter). Only frequencies higherthan those in the selected range are outputtedfrom the front or rear speakers. 1 Use MULTI-CONTROL to ...
Page 48 - Initial Settings; Adjusting initial settings; FUNCTION; Selecting the display language; РУССКИЙ; Setting the date
Initial Settings Adjusting initial settings Using the initial settings, you can customizevarious system settings to achieve optimal per-formance from this unit. 1 1 1 1 Function displayShows the function status. 1 Press SOURCE and hold until the unit turns off. 2 Press MULTI-CONTROL and hold until L...
Page 49 - Setting the FM tuning step; Pressing
2 Push MULTI-CONTROL left or right to select the segment of the clock display youwish to set. Pushing MULTI-CONTROL left or right will se- lect one segment of the clock display:Hour — Minute As you select segments of the clock displaythe segment selected will blink. 3 Push MULTI-CONTROL up or down t...
Page 50 - Switching the auxiliary setting; Using; Switching the dimmer setting
2 Press MULTI-CONTROL to turn the face auto open on. # To turn the face auto open off, press MULTI-CONTROL again. Switching the auxiliary setting Auxiliary equipments connected to this unitcan be activated individually. Set each AUXsource to ON when using. About connectingor using auxiliary equipmen...
Page 51 - Switching the feature demo; Switching the reverse mode; Switching the Ever Scroll
! The sound is muted or attenuated, MUTE or ATT are displayed and no audio adjust- ment is possible. ! Sound from this system returns to normalwhen the muting or attenuation is can-celed. 1 Use MULTI-CONTROL to select Mute. 2 Press MULTI-CONTROL to switch the tel- ephone muting/attenuation. Pressing...
Page 52 - can change this in this function.; Editing device name; as
Entering PIN code for Bluetoothwireless connection To connect your cellular phone to this unit viaBluetooth wireless technology, you need toenter PIN code on your phone to verify theconnection. The default code is 0000 , but you can change this in this function. ! With some Bluetooth audio players, ...
Page 53 - Push MULTI-CONTROL right to show a; If you do not want to reset phone memory,; Press MULTI-CONTROL to clear the; Other Functions; Using the AUX source; About; Insert the stereo mini plug into the; You can only make this type of connection if
Resetting the Bluetoothwireless technology module Bluetooth telephone and Bluetooth Audiodata can be deleted. To protect personal infor-mation, we recommend deleting this data be-fore transferring the unit to other persons. Thefollowing settings will be deleted. ! phone book entries on the Bluetooth...
Page 54 - Selecting AUX as the source; ing the auxiliar y setting; Setting the AUX title; tering disc titles; Using the PGM button
Selecting AUX as the source % Press SOURCE to select AUX as the source. # If the auxiliary setting is not turned on, AUX cannot be selected. For more details, see Switch- ing the auxiliar y setting on page 50. Setting the AUX title The title displayed for each AUX1 or AUX2 source can be changed. 1 A...
Page 55 - USB adapter; BAND; lecting a track directly; Function and operation; Available accessories
USB adapter Basic Operations You can use this unit to control a USB adapter,which is sold separately. For details concerning operation, refer to theUSB adapter ’ s operation manual. This section provides information on USB portable audioplayer/USB memory operations with this unitwhich differs from t...
Page 58 - and; Using ITS playlists; Creating a playlist with ITS programming; Push
# If you do not operate functions except for ITS memo and TitleInput "A" within about 30 seconds, the display is automatically returned tothe ordinary display. Function and operation Play mode , Random mode , Scan mode , Pause , Compression and TitleInput "A" op- erations are basical...
Page 59 - Playing tracks in random order; If no tracks in the current range are pro-; Erasing a track from your ITS playlist; Playback from your ITS playlist; If there are no tracks from your playlist in the; Erasing a CD from your ITS playlist
Note After data for 100 discs has been stored in mem-ory, data for a new disc will overwrite the oldestone. Playback from your ITS playlist ITS play lets you listen to the tracks that youhave entered into your ITS playlist. When youturn on ITS play, tracks from your ITS playlistin the multi-CD playe...
Page 60 - Displaying disc titles; Selecting discs from the disc title list; Press LIST to switch to the disc title list; No Disc; Using CD TEXT functions; Displaying text information on disc; DVD Player; VCD; Press SOURCE to select the DVD player/
! Titles remain in memory, even after thedisc has been removed from the magazine,and are recalled when the disc is rein-serted. ! After data for 100 discs has been stored inmemory, data for a new disc will overwritethe oldest one. Displaying disc titles You can display the text information of anydis...
Page 61 - During DVD video or Video CD playback; You can also select the function by pressing
Selecting a disc ! You can operate this function only when amulti-DVD player is connected to this unit. % Press any of 1 to 6 on the remote con- trol to select the desired disc. Selecting a folder ! You can operate this function only when aDVD player which is corresponding to com-pressed audio playb...
Page 62 - TV tuner; Press SOURCE to select the TV.
Notes ! If you select other discs during repeat play,the repeat play range changes to Disc repeat . ! During video CD or CD playback, if you per-form track search or fast forward/reverse dur-ing Track repeat , the repeat play range changes to Disc repeat . ! During compressed audio playback, if you ...
Page 64 - Troubleshooting; iPod; Bluetooth audio/telephone; Additional Information
Troubleshooting Symptom Cause Action iPod doesn ’ t operate cor-rectly. Cables are incor-rectly connected. Disconnect thecable from iPod.Once iPod mainmenu is displayed,connect the cableagain.Reset the iPod. Understanding errormessages When you contact your dealer or your nearestPioneer Service Cent...
Page 65 - Dual Discs
Handling guideline of discsand player ! Use only discs featuring either of followingtwo logos. ! Use only conventional, fully circular discs.Do not use shaped discs. ! Use 12-cm or 8-cm CD. Do not use anadapter when playing 8-cm CDs. ! Do not insert anything other than a CD intothe CD loading slot. ...
Page 66 - Example of a hierarchy; : Compressed audio file; Compressed audio compatibility; WMA
! Only 64 characters from the beginning canbe displayed as a file name (including theextension such as .wma, .mp3, .m4a or.wav) or a folder name. ! Folder selection sequence or other opera-tion may be altered depending on the en-coding or writing software. ! Regardless of the length of blank section...
Page 67 - About handling the iPod; For details, refer to the iPod; About iPod settings
About handling the iPod CAUTION ! Pioneer accepts no responsibility for data loston the iPod even if that data is lost whileusing this unit. ! Do not leave the iPod in direct sunlight for ex-tended amounts of time. Extended exposureto direct sunlight can result in iPod malfunc-tion due to the result...
Page 68 - Specifications
Specifications General Power source ............................. 14.4 V DC (10.8 V to 15.1 V allowable) Grounding system ................... Negative typeMax. current consumption ..................................................... 10.0 A Dimensions (W × H × D): DIN Chassis ..................... 1...
Page 69 - Una vez que las haya leído, conser ve; Antes de comenzar; Español; Contenido
Gracias por haber comprado este producto Pioneer. Lea con detenimiento estas instrucciones sobre el funcionamiento del aparato,para que pueda darle el mejor uso posible. Una vez que las haya leído, conser ve este manual en un lugar seguro para consultarlo en el futuro. Antes de comenzar Acerca de es...
Page 72 - Acerca de esta unidad; PRECAUCIÓN; PRODUCTO LÁSER DE CLASE 1; Acerca de WMA
Si desea deshacerse de este producto, no lomezcle con los residuos generales de suhogar. De conformidad con la legislación vi-gente, existe un sistema de recogida distintopara los productos electrónicos que requierenun procedimiento adecuado de tratamiento,recuperación y reciclado. Las viviendas pri...
Page 73 - Ambiente de funcionamiento
! Esta unidad puede no funcionar correcta-mente, dependiendo de la aplicación utili-zada para codificar ficheros WMA. Acerca de MP3 La venta de este producto sólo otorga una li-cencia para su uso privado, no comercial. Nootorga ninguna licencia ni concede ningúnderecho a utilizar este producto en tr...
Page 74 - Visite nuestro sitio Web; Visítenos en el siguiente sitio:; En caso de problemas; Cambio del tono de advertencia; Importante; Extracción de la carátula; Mantenga presionado OPEN para abrir; Colocación de la carátula; Asegúrese de que la cubierta interna
Visite nuestro sitio Web Visítenos en el siguiente sitio: ! Registre su producto. Conservaremos losdatos de su compra archivados para quepueda consultar esta información en casode que deba efectuar un reclamo a la com-pañía de seguros por pérdida o robo. ! En nuestro sitio Web ofrecemos la informa-c...
Page 75 - Si la unidad no funciona correctamente; Acerca del modo demo; Modo inverso; Instalación de la batería
2 Vuelva a colocar la carátula; para ello, hágala encajar en su lugar. Reinicialización delmicroprocesador Se debe reinicializar el microprocesador si sepresentan las siguientes condiciones: ! Antes de utilizar esta unidad por primeravez después de su instalación ! Si la unidad no funciona correctam...
Page 76 - Utilice una sola batería de litio; Uso del mando a distancia
ADVERTENCIA Mantenga la batería fuera del alcance de losniños. En caso de ingestión accidental, consultea un médico de inmediato. PRECAUCIÓN ! Utilice una sola batería de litio CR2025 (3 V) . ! Extraiga la batería si no piensa utilizar elmando a distancia durante un mes o mástiempo. ! Peligro de exp...
Page 77 - Qué es cada cosa; Unidad principal; Utilización de esta unidad
Qué es cada cosa Unidad principal 1 Botón SOURCE Esta unidad se enciende al seleccionar unafuente. Presione este botón para visualizartodas las fuentes disponibles. 2 MULTI-CONTROL Mueva el joystick para utilizar los controlesde sintonización por búsqueda manual,avance rápido, retroceso y búsqueda d...
Page 78 - Mando a distancia; con la excepción del con-
b Botón BAND Pulse este botón para seleccionar entre tresbandas FM y las bandas MW/LW, y paracancelar el modo de control de funciones. Mando a distancia Las funciones se utilizan de la misma maneraque al usar los botones de la unidad principal. c Botones VOLUME Presione este botón para aumentar o di...
Page 79 - Funciones básicas; Encendido y apagado; Encendido de la unidad; Selección de una fuente; Presione; Notas; Ajuste del volumen
Funciones básicas Encendido y apagado Encendido de la unidad % Presione SOURCE para encender la uni- dad. Apagado de la unidad % Mantenga presionado SOURCE hasta que se apague la unidad. Selección de una fuente Puede seleccionar una fuente que desee escu-char. Para cambiar al reproductor de CD incor...
Page 80 - Sintonizador; RDS; Presione SOURCE para seleccionar el
Sintonizador Funciones básicas Se puede activar y desactivar la función AF(búsqueda de frecuencias alternativas) de estaunidad. Se debe desactivar la función AF parala sintonización normal (consulte la página82). RDS RDS (sistema de datos de radio) contiene in-formaciones inaudibles que ayudan a bus...
Page 81 - También se pueden recuperar las frecuencias; Haga girar
Nota Si se escucha la radio MW teniendo el iPod co-nectado a esta unidad, puede generarse ruido.En tal caso, desconecte el iPod de la unidad paraque desaparezca el ruido. Almacenamiento yrecuperación de frecuencias Se pueden almacenar con facilidad hasta seisfrecuencias de emisoras para recuperarlas...
Page 82 - en el mando a distancia.; Sintonización de señales fuertes; El ajuste
# También se puede seleccionar la función pre- sionando FUNCTION en el mando a distancia. # Si se elige la banda MW/LW, sólo se puede se- leccionar BSM o Local . # Para volver a la visualización de la frecuencia, presione BAND . # Si no se utilizan las funciones en unos 30 se- gundos, el display vol...
Page 83 - Uso de la búsqueda PI; y la salida; Para desactivar la función regional, vuelva a; Recepción de anuncios de tráfico; Se iluminará el indicador TP (; Para desactivar la espera por anuncio de tráfi-
! Otro programa puede interrumpir temporal-mente el sonido durante la búsqueda de unafrecuencia AF. ! La función AF se puede activar y desactivar in-dependientemente para cada banda FM. Uso de la búsqueda PI Si el sintonizador no puede encontrar unaemisora adecuada o el estado de la recepciónempeora...
Page 84 - Uso de las funciones PTY; Uso del radio texto
! Sólo se sintonizan las emisoras TP y las emi-soras TP de otra red realzada durante la sinto-nización por búsqueda o BSM cuando lafunción TA está activada. Uso de las funciones PTY Se puede sintonizar una emisora usando la in-formación PTY (tipo de programa). Búsqueda de una emisora RDS porinformac...
Page 85 - Se puede cancelar la visualización de radio; Visualización de radio texto; Lista PTY
Visualización de radio texto Se puede visualizar el radio texto que se acabade recibir y los tres radio textos más recientes. 1 Presione DISPLAY y mantenga presio- nado para visualizar el radio texto. Se visualiza el radio texto de la emisora queestá transmitiendo actualmente. # Se puede cancelar la...
Page 86 - Indicador
Others Educate Programas educativos Drama Comedias y series radiofó-nicas Culture Cultura nacional o regio-nal Science Naturaleza, ciencia y tec-nología Varied Entretenimiento ligero Children Programas para niños Social Temas sociales Religion Programas o servicios deasuntos religiosos Phone In Entr...
Page 87 - ra de carga de discos.; Asegúrese de que el lado de la etiqueta; Presione MULTI-CONTROL arriba o; Búsqueda cada 10; Para saltar y retroceder o avanzar hasta
Ranura de carga de discos 2 Introduzca un CD (CD-ROM) por la ranu- ra de carga de discos. La carátula se cierra automáticamente y co-mienza la reproducción. # Asegúrese de que el lado de la etiqueta del disco esté hacia arriba. # Después de colocar un CD (CD-ROM), presio- ne SOURCE para seleccionar ...
Page 88 - vos de audio comprimidos; Selección directa de una pista; Se reproducirá la pista seleccionada.
! Dependiendo de los conjuntos de caracterespresentes en el disco, los textos en ruso pue-den aparecer no reconocibles. Para ver infor-mación sobre los conjuntos de caracterespermitidos para textos en ruso, consulte Archi- vos de audio comprimidos en la página 140. Selección directa de una pista Al ...
Page 89 - Exploración de carpetas y pistas; Selección de una gama de repetición; Uso de la compresión y BMX
# Al reproducir un CD, realizar una búsqueda de pista o el avance rápido/retroceso, se cancelaautomáticamente la repetición de reproducción. # Al reproducir audio comprimido, si se realiza una búsqueda de pista o el avance rápido/retro-ceso durante Track repeat (repetición de pista), se cambia la ga...
Page 90 - Ingreso de títulos de discos
Búsqueda cada 10 pistas en eldisco o carpeta actuales Se puede cambiar el método de búsquedaentre las opciones de avance rápido/retrocesoy búsqueda cada 10 pistas. Seleccionar Rough search le permite realizar la búsqueda cada 10 pistas. 1 Utilice MULTI-CONTROL para seleccio- nar Search mode en el me...
Page 92 - Conecte el iPod a esta unidad.; Cuando reproduzca audiolibros o pod-
# También puede cambiar el nombre del fichero o de la carpeta, presionando MULTI-CONTROL arriba o abajo. # Para volver a la lista anterior (la carpeta de un nivel superior), pulse MULTI-CONTROL hacia la izquierda. # Si el número de carpeta o fichero es superior a 100, se visualizarán los últimos 2 d...
Page 93 - Para buscar una canción; Podcasts
Notas ! Lea las precauciones relativas al iPod en la pá-gina 142. ! Si aparece un mensaje de error como ERROR-11 , consulte Para comprender los men- sajes de error en la página 139. ! Conecte directamente el conector del Dock deesta unidad al iPod para que esta unidad fun-cione adecuadamente. ! Cuan...
Page 94 - Repetición de reproducción; Nota; Para poner en pausa una canción
Introducción a las funcionesavanzadas 1 Presione MULTI-CONTROL para visuali- zar el menú principal.FUNCTION , AUDIO y ENTERTAINMENT apa- recen en el display. 2 Utilice MULTI-CONTROL para seleccio- nar FUNCTION. Haga girar el control para cambiar la opciónde menú y presiónelo para seleccionarla.Apare...
Page 95 - Faster
2 Presione MULTI-CONTROL para activar la pausa. Se detiene temporalmente la reproducción dela canción actual. # Para desactivar la pausa, vuelva a presionar MULTI-CONTROL . Cambio de la velocidad delaudiolibro La velocidad de reproducción del audiolibro sepuede modificar. 1 Utilice MULTI-CONTROL par...
Page 96 - Consulte; en la página siguiente y
! Incluso si está escuchando un canción en sureproductor de audio Bluetooth y cambia aotra fuente, la reproducción de la cancióncontinúa. Aunque su reproductor de audio no esté pro-visto de un módulo Bluetooth, lo puede con-trolar desde esta unidad a través detecnología inalámbrica Bluetooth por med...
Page 98 - Edición del nombre del dispositivo
1 Utilice MULTI-CONTROL para seleccio- nar Connect audio en el menú de funcio-nes. 2 Presione MULTI-CONTROL para co- nectar el reproductor de audio Bluetooth. Mientras se realiza la conexión, se mostrará Connecting . Una vez completada la conexión, aparece Connected . Reproducción de canciones en el...
Page 99 - Teléfono Bluetooth; ción a las funciones avanzadas; AUTO
Teléfono Bluetooth Funciones básicas Si su teléfono móvil posee tecnología inalámbri-ca Bluetooth, puede conectarse a esta unidadpara hacer llamadas inalámbricas de manos li-bres, incluso al conducir. Importante ! Puesto que esta unidad se encuentra en espe-ra para conectar con sus teléfonos móviles...
Page 100 - Modo de espera; Conexión de un teléfono móvil
! La distancia de visibilidad entre esta unidad ysu teléfono móvil deber ser de 10 metros o in-ferior para el envío y recepción de voz y datosmediante la tecnología inalámbrica Bluetooth.Sin embargo, la distancia de transmisiónpuede llegar a ser más corta que la distanciaestimada, dependiendo del en...
Page 101 - Reconocimiento de voz; Atender una llamada entrante
Realización de una llamadatelefónica Marcar un número La manera más básica de hacer una llamadaes simplemente marcar el número.Consulte Realización de una llamada ingresan- do el número de teléfono en la página 111 para ver instrucciones detalladas. Llamar a un número del Directorio deteléfonos o de...
Page 102 - Rechazo de una llamada entrante; Ajuste del rechazo automá-; Atender una llamada en espera; Rechazo de una llamada en espera; ON HOOK; Si aún no está conectado
Rechazo de una llamada entrante Puede rechazar una llamada entrante. Para re-chazar automáticamente todas las llamadasentrantes, consulte Ajuste del rechazo automá- tico en la página 112. % Cuando entre una llamada, presione PHONE. Se rechazará la llamada. # También se puede rechazar una llamada pre...
Page 103 - Si ya está conectado y registrado; Registro del teléfono móvil
Search&Connect (buscar y conectar) — Connection open (conexión abierta) — Connect phone (conectar teléfono) — Delete phone (eliminar teléfono) — PH.B.Transfer (transferencia del directorio de teléfonos) — Refuse calls (ajuste de rechazo automático) — Auto answer (ajuste de res- puesta automática...
Page 104 - Desconexión de un teléfono móvil
3 Pulse MULTI-CONTROL arriba o abajo para seleccionar el nombre del dispositivoque desea conectar. 4 Pulse MULTI-CONTROL para conectar el teléfono móvil seleccionado. Mientras se realiza la conexión, se mostrará Connecting . Para completar la conexión, veri- fique el nombre del dispositivo (p. ej., ...
Page 105 - Una vez completado el registro, aparece; Se visualiza
# A medida que seleccione cada asignación, podrá ver si un teléfono ya está registrado o no.Si la asignación está vacía, se visualizará No data . Si ya se ha adoptado la asignación, apa- recerá el nombre del dispositivo. Si desea susti-tuir una asignación con un nuevo teléfono,primero elimine la asi...
Page 106 - xión manual a un teléfono registrado; Uso del Directorio de teléfonos
3 Pulse MULTI-CONTROL para conectar el teléfono móvil seleccionado. Mientras se realiza la conexión, se mostrará Connecting . Una vez completada la conexión, aparece Connected . # Si Auto connect está activado, el teléfono móvil registrado conectado más recientementese conecta automáticamente. Para ...
Page 108 - ro del Directorio de teléfonos
# Puede hacer que el nombre y el número de te- léfono se desplacen, presionando DISPLAY y manteniendo presionado. # Si va a introducir varios números de teléfono en una entrada, seleccione un número girando MULTI-CONTROL . # Pulse MULTI-CONTROL izquierda si desea re- gresar y seleccionar otra entrad...
Page 109 - Edición de números de teléfono; Borrado de la memoria
# Si mantiene presionado DISPLAY , puede cam- biar el conjunto de caracteres entre ISO8859-1(caracteres europeos), ISO8859-5 (caracteresrusos) e ISO8859-7 (caracteres griegos) de mane-ra alternante. # Los caracteres europeos, los caracteres rusos y los caracteres griegos no se pueden combinar. 5 Pul...
Page 110 - Uso del Historial de llamadas; Visualización del Historial de llamadas; Uso del Directorio de teléfo-
3 Gire MULTI-CONTROL para cambiar a la pantalla de borrado de memoria. Al girar MULTI-CONTROL se cambiarán las pantallas de entrada en el siguiente orden: Edit genre (pantalla de ingreso de género) — Edit name (pantalla de ingreso de nombre) — Edit number (pantalla de ingreso de número) — Clear memo...
Page 111 - Asignación de números prefijados
Llamada a un número desde elHistorial de llamadas 1 Visualice la lista y seleccione un número de teléfono. Visualice el número de teléfono al que deseallamar.Consulte Visualización del Historial de llamadas en la página anterior. 2 Pulse MULTI-CONTROL para hacer una llamada. Mientras se llama, se mu...
Page 112 - Se puede ingresar hasta 24 dígitos.; Cada vez que se pulsa; Si desea borrar todo el Directorio de teléfonos,; Si no desea borrar la memoria que ha selec-; Ajuste del rechazo automático; Para desactivar el rechazo automático de lla-; Ajuste de la respuesta automática
3 Presione MULTI-CONTROL izquierda o derecha para mover el cursor a la anterioro siguiente posición. # Se puede ingresar hasta 24 dígitos. 4 Cuando haya terminado de ingresar el número, presione MULTI-CONTROL. 5 Pulse MULTI-CONTROL nuevamente para hacer una llamada. 6 Para finalizar la llamada, puls...
Page 113 - Cambio del tono de llamada
2 Pulse MULTI-CONTROL para activar la respuesta automática. # Para desactivar la respuesta automática, vuel- va a pulsar MULTI-CONTROL . Nota Si las funciones de rechazo automático y res-puesta automática están activadas, el rechazoautomático tendrá prioridad, y todas las llamadasentrantes se rechaz...
Page 114 - Ajustes de audio; Introducción a los ajustes de audio
2 Utilice MULTI-CONTROL para seleccio- nar RECEIVING MOVIE. Haga girar el control para cambiar la opciónde menú y presiónelo para seleccionarla. 3 Utilice MULTI-CONTROL para seleccio- nar la pantalla. Haga girar el control para cambiar la opciónde menú y presiónelo para seleccionarla.Pantalla 1 — Pa...
Page 115 - Uso del ajuste del balance; Uso del ecualizador
# Para volver a la visualización de cada fuente, presione BAND . # Si no se utilizan las funciones exceptuando 50Hz en unos 30 segundos, el display volverá automáticamente a la visualización normal. Uso del ajuste del balance Se puede cambiar el ajuste de fader/balance,de manera que proporcione un e...
Page 116 - Ajuste de las curvas de ecualización; La gama real de ajustes difiere de acuerdo; Recuperación de las cur vas de ecuali-; Se puede seleccionar otra banda y ajustar su; Ajuste de la sonoridad
Ajuste de las curvas de ecualización Las curvas de ecualización que vienen predefi-nidas de fábrica, con la excepción de Flat , se pueden ajustar a un nivel preciso (control dematiz). 1 Utilice MULTI-CONTROL para seleccio- nar el ajuste del ecualizador gráfico.Powerful aparece en el display. Si se h...
Page 118 - Uso del filtro de paso alto; aparece en el display. Se activa el filtro; Si el filtro de paso alto se ha ajustado con an-; Ajuste de los niveles de la fuente; Cada vez que se presiona; aparece en el display.; Para desactivar la función ASL, vuelva a pre-
Uso del filtro de paso alto Cuando no desea que se generen los sonidosbajos de la gama de frecuencias de salida desubgraves a través de los altavoces delanteroso traseros, active el filtro de paso alto (HPF).Sólo las frecuencias más altas que aquéllasen la gama seleccionada se generan a travésde los...
Page 119 - Ajustes iniciales; También puede realizar esta operación mante-
3 Presione MULTI-CONTROL izquierda o derecha para seleccionar el nivel del ASLdeseado. Cada vez que se presiona MULTI-CONTROL iz- quierda o derecha, se selecciona un nivel delASL en el siguiente orden: Low (bajo) — Mid-L (medio-bajo) — Mid (medio) — Mid-H (medio-alto) — High (alto) Ajustes iniciales...
Page 120 - Ajuste de la fecha
Language select (selección de idioma) — Calendar (calendario) — Clock (reloj) — Off clock (reloj de apagado) — FM step (paso de sintonía de FM) — Auto PI (búsqueda PI automática) — Warning tone (tono de adver- tencia) — Face auto open (apertura automáti- ca de la cara) — AUX1 (entrada auxiliar 1) — ...
Page 121 - Ajuste del paso de sintonía de FM; Al presionar
Nota Se puede sincronizar el reloj con una señal tem-poral pulsando MULTI-CONTROL . ! Si los minutos son 00 a 29 , éstos se redon- dean hacia abajo. (p. ej., 10:18 se redondea en 10:00 .) ! Si los minutos son 30 a 59 , éstos se redon- dean hacia arriba. (p. ej., 10:36 se redondea en 11:00 .) Activac...
Page 122 - Ajuste del brillo
2 Presione MULTI-CONTROL para activar la apertura automática de la cara. # Vuelva a presionar MULTI-CONTROL para de- sactivar la apertura automática de la cara. Cambio del ajuste de un equipoauxiliar Los equipos auxiliares conectados a esta uni-dad se pueden activar por separado. Al utili-zarla, fij...
Page 123 - Cambio del modo inverso
! Las salidas de cables de altavoces traseros yla salida RCA posterior se cambian simultá-neamente en este ajuste. Cambio del silenciamiento/atenuación del sonido El sonido proveniente de este sistema se silen-cia o atenúa automáticamente cuando se reci-be la señal desde el equipo con función desile...
Page 126 - Otras funciones; Uso de la fuente AUX; relación entre las fuentes; Acerca de; Sólo puede hacer este tipo de conexión si el; Selección de AUX como la fuente; Si el ajuste auxiliar no está activado, no es po-; Ajuste del título AUX
Otras funciones Uso de la fuente AUX Esta unidad puede controlar hasta dos com-ponentes auxiliares, como VCR o dispositivosportátiles (se venden por separado). Cuandoestán conectados, los componentes auxiliaresson identificados automáticamente comofuentes AUX y se asignan a AUX1 o AUX2 . La relación...
Page 127 - Uso del botón PGM; en el mando a
BGV-1 (presentación visual de fondo 1) — BGV-2 (presentación visual de fondo 2) — BGP-1 (imagen de fondo 1) — BGP-2 (imagen de fondo 2) — BGP-3 (imagen de fondo 3) — BGP-4 (imagen de fondo 4) — SIMPLE-1 (dis- play simple 1) — SIMPLE-2 (display simple 2) — LEVEL METER (medidor de nivel) — VISUALIZER-...
Page 128 - Adaptador USB; Selección directa de una; Accesorios disponibles
Adaptador USB Funciones básicas Se puede utilizar esta unidad para controlar unadaptador USB, que se vende por separado. Para obtener más información, consulte elmanual de instrucciones del adaptador USB.Esta sección proporciona información acercade las funciones del reproductor de audio por-tátil U...
Page 129 - Función y operación; Las operaciones; Visualización de información de texto
Función y operación Las operaciones Play mode , Random mode , Scan mode y Pause son básicamente las mis- mas que las del reproductor de CD incorpora-do. Nombre de la función Operación Play mode Consulte Selección de una gama de repetición de repro-ducción en la página 88. Pero las gamas de repeti-ci...
Page 130 - Reproductor de CD múltiple
Reproductor de CD múltiple Funciones básicas Se puede usar esta unidad para controlar un re-productor de CD múltiple, que se vende por se-parado. ! Sólo las funciones descritas en este manualson compatibles con los reproductores deCD múltiple de 50 discos. ! Esta unidad no está diseñada para utiliza...
Page 132 - Uso de listas de reproducción ITS; Reproducción de las pistas en orden; Si no hay pistas programadas en la gama ac-; Reproducción de la lista de reproduc-
Uso de listas de reproducción ITS La función ITS (selección instantánea depista) le permite crear una lista de reproduc-ción de las pistas favoritas incluidas en el car-gador del reproductor de CD múltiple.Después de añadir sus pistas favoritas a lalista de reproducción, puede activar la repro-ducci...
Page 133 - Pulse; Visualización de los títulos de discos; También puede cambiar el título del disco pul-
3 Seleccione la pista deseada pulsando MULTI-CONTROL izquierda o derecha. 4 Presione MULTI-CONTROL abajo para eliminar la pista de la lista de reproducciónITS. La pista que se está reproduciendo se borrade la lista de reproducción ITS y comienza lareproducción de la próxima pista de la lista. # Si n...
Page 134 - Uso de las funciones CD TEXT; Reproductor de DVD; Presione SOURCE para seleccionar el re-
# Cuando reproduzca un disco CD TEXT, presio- ne MULTI-CONTROL derecha para visualizar una lista de las pistas en el disco seleccionado. Pre-sione MULTI-CONTROL izquierda para volver a la lista del disco. # Si no se ha ingresado un título para un disco, se visualizará No D.Title . # Se visualiza No ...
Page 135 - Durante la reproducción de un CD; También se puede seleccionar la función pre-
2 Para realizar el avance rápido o retroce- so, mantenga pulsado MULTI-CONTROL iz-quierda o derecha. 3 Para saltar y retroceder o avanzar hasta otro capítulo/pista, presioneMULTI-CONTROL izquierda o derecha. Selección de un disco ! Se puede utilizar esta función sólo si un re-productor de DVD múltip...
Page 137 - Sintonizador de TV; utilizando el
Sintonizador de TV Funciones básicas Se puede utilizar esta unidad para controlar unsintonizador de TV, que se vende por separado. Para obtener más información, consulte elmanual de instrucciones del sintonizador deTV. Esta sección proporciona informaciónacerca de las funciones de TV con esta unidad...
Page 139 - Solución de problemas; Reproductor de CD incorporado; Bluetooth audio/teléfono; Información adicional
Solución de problemas Síntoma Causa Acción El iPod no fun-ciona correcta-mente. Los cables estánconectados inco-rrectamente. Desconecte elcable del iPod. Unavez que aparezca elmenú principal deliPod, conecte elcable nuevamente.Reinicie el iPod. Para comprender losmensajes de error Cuando contacte co...
Page 141 - Ejemplo de una jerarquía; : Archivo de audio comprimido
! Según el software (o la versión del softwa-re) utilizado para codificar los ficheros deaudio, es posible que esta unidad no fun-cione correctamente. ! Es posible que ocurra un pequeño retardoal iniciar la reproducción de ficherosWMA/AAC codificados con datos de ima-gen. ! Conforme con ISO 9660 Niv...
Page 142 - Acerca del manejo del iPod; Acerca de los ajustes del iPod
AAC ! Formato compatible: AAC codificados coniTunes ® versión 6.0.5 y anteriores ! Frecuencia de muestreo: 11,025 kHz a 48kHz ! Velocidad de transmisión: 16 kbps a 320kbps ! Apple Lossless: No WAV ! Formato compatible: Lineal PCM (LPCM),MS ADPCM ! Bits de cuantificación: 8 y 16 (LPCM), 4(MS ADPCM) !...
Page 143 - Especificaciones
Especificaciones Generales Fuente de alimentación ........ 14,4 V CC (10,8 a 15,1 V per- misible) Sistema de conexión a tierra ..................................................... Tipo negativo Consumo máximo de corriente ..................................................... 10,0 A Dimensiones (An ...
Page 144 - PIONEER CORPORATION
PIONEER CORPORATION 4-1, MEGURO 1-CHOME, MEGURO-KUTOKYO 153-8654, JAPAN PIONEER ELECTRONICS (USA) INC. P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.TEL: (800) 421-1404 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, BelgiumTEL: (0) 3/570.05.11 PIONEER ELECTRONICS ASIACENTRE ...