Philips S6540/90 - User Manual

SAVE THESE INSTRUCTIONS Contents IMPORTANT SAFETY INSTRUCTIONS______________________ 6 General description_________________________________________ 8 Introduction_________________________________________________ 9 The display__________________________________________________ 9 Charging______________...

10 Battery charge indicator11 Socket for small plug12 Power plug13 Cleaning brush14 Travel case Introduction Congratulations on your purchase andwelcome to Philips Norelco! To fully benefit from the support that PhilipsNorelco offers, register your product at www.philips.com/register . The display B...

Charging - Charging or using the product at temperatures below 40   °F (4.5   °C) or higher than 95   °F (35   °C) adversely affects the lifespan of the battery. - Do not charge the shaver in a pouch or travel case. - The power plug transforms 100-240V AC to less than 24V DC. Charge the shaver befor...

3 After charging, remove the power plug fromthe wall outlet and pull the small plug out ofthe shaver. Note: An adapter plug may be necessary forcord usage in some foreign countries. Use anattachment plug adapter of the properconfiguration for the power outlet. Using the shaver Always check the shave...

- Use your new shaver exclusively for 3 weeks to fully enjoy the closeness of a PhilipsNorelco shave. - At first you may not get as close a shave as you expect, or your face may even becomeslightly irritated. This is normal since yourbeard and skin will need time to adjust.Invest 3 weeks and you'll ...

3 Stretch your skin with your free hand soblades can lift and cut hairs. Gently pressshaver to skin so the floating heads canfollow the contours of your face.Do not press too hard as too much pressurecan cause shaving heads to pinch the skin. 4 Switch off the Turbo+ setting by pressingthe Turbo+ but...

3 Hold the trimmer perpendicular to the skinand move it downwards while exertinggentle pressure. 4 Switch off and clean the trimmer after use. Note: Trimming is easier when the skin andhair are dry. Travel lock You can lock the shaver when you are going totravel to prevent it from switching onaccide...

Note: The shaver unlocks automatically whenit is connected to a power outlet. Cleaning and maintenance Regular cleaning guarantees bettershaving results. Never clean, remove or replace the shavingunit while the shaver is switched on. Do not touch shaving heads with hardobjects as this may dent or da...

2 Rinse the shaving unit under a warm tap. 3 Switch off the appliance. Press the releasebutton to open the shaving unit. 4 Rinse the hair chamber under the tap. 5 Rinse the shaving head holder under awarm tap. 6 Carefully shake off excess water and let theshaving head holder air-dry completely. 7 Cl...

6 Clean the cutter and guard under the tap. 7 Shake off excess water. 8 Put the cutter back into the guard. 9 Place the shaving heads in the shavinghead holder. 1 2 10 Place the retaining ring on the shavinghead. 11 Turn the ring clockwise until it clicks toindicate that the ring is fixed. 12 Attach...

2 Rinse the trimmer under a warm tap. 3 After cleaning, switch off the shaver. 4 Carefully shake off excess water and let thetrimmer air dry completely. 5 For optimal performance, lubricate theteeth of the trimmer with a drop of mineraloil every six months. Replacement Replacing the shaving heads Fo...