Page 3 - Contents
1 EN Contents 1 Important safety instructions 3 2 Your phone 5 What is in the box 5 Over view of the phone 5 Over view of the base station 7 3 Get started 8 Connect the base station 8 Install the handset 8 Configure your phone (countr y dependent) 9 Change the remote access PIN/passcode 9 Charge the...
Page 7 - Your phone; What is in the box; Overview of the phone
5 EN 2 Your phone Congratulations on your purchase and welcome to Philips! To fully benefit from the suppor t that Philips offers, register your product at www.philips. com/welcome. What is in the box Handset** Base station Power adapter** Line cord* Guarantee Shor t user manual Note • * In some cou...
Page 9 - Overview of the base station
7 EN • Flashing quickly: incoming calls • Flashing slowly: charging empty batteries. s Battery door Note • This product is par tly made from finely selected natural wood. The color of the wood and finish may change with exposure to direct or indirect sunlight and other environmental factors. This co...
Page 10 - Get started; Connect the base station; Install the handset
8 EN 3 Get started Caution • Make sure that you have read the safety instructions in the 'Impor tant safety instructions' section before you connect and install your handset. Connect the base station Warning • Risk of product damage! Ensure that the power supply voltage corresponds to the voltage pr...
Page 11 - Configure your phone; Set the country/language; Set the date and time; Set the date and time format; Change the remote access
9 EN Warning • Check the batter y polarity when inser ting in the batter y compar tment. Incorrect polarity may damage the product. Configure your phone (country dependent) 1 When using your phone for the first time, you see a welcome message. 2 Press [OK] . Set the country/language Select your coun...
Page 12 - Charge the handset; Check the battery level
10 EN 3 Select [Remote access] > [Change PIN] , then press [OK] to confirm. 4 Enter the old PIN/passcode, then press [OK] to confirm. 5 Enter the new PIN/passcode, then press [OK] to confirm. 6 Enter the new PIN/passcode again, then press [Save] to confirm. » The setting is saved. Charge the hand...
Page 15 - Display icons
13 EN 5 Display icons In standby mode, the icons shown on the main screen tell you what features are available on your handset. Icon Descriptions When the handset is off the base station/charger, the bars indicate the batter y level (from full to low). When the handset is on the base station/charger...
Page 16 - Calls; Make a call; Normal call; Answer a call
14 EN 6 Calls Note • When the power fails, the phone cannot access emergency ser vices. Tip • Check the signal strength before you make a call or when you are in a call (see 'Check the signal strength' on page 10). Make a call You can make a call in these ways: • Normal call • Predial call • Call th...
Page 19 - Make a call to another; While you are on the phone; Transfer a call; Make a conference call
17 EN 7 Intercom and conference calls Note • This feature is available for multi- handset versions only. An intercom call is a call to another handset that shares the same base station. A conference call involves a conversation between you, another handset user and the outside callers. Make a call t...
Page 20 - During an external call; During the conference call
18 EN During an external call 1 Press and hold to initiate an internal call. » The external caller is put on hold. » For multi-handset versions, The handsets available for intercom are displayed. Then go to step 2. » For two-handset versions, the other handset rings. Then go to step 3. 2 Select a ha...
Page 21 - Enter text and numbers; Switch between uppercase
19 EN 8 Text and numbers You can enter text and numbers for handset name, phonebook records, and other menu items. Enter text and numbers 1 Press once or several times on the alphanumeric key to enter the selected character. 2 Press [Clear] to delete the character. Press / to move the cursor left an...
Page 22 - Phonebook; Scroll the contact list
20 EN 9 Phonebook This phone has a phonebook that stores up to 250 records. You can access the phonebook from the handset. Each record can have a name up to 16 characters long and a number up to 24 digits long. There are 9 direct access memories (keys 1 to 9). Depending on your countr y, keys 1 and ...
Page 23 - Edit a record; Set the speed dial keys
21 EN • select [Menu] . Press / to select , then press [OK] to confirm. 2 Select [Option] > [Add new] , then press [OK] to confirm. 3 Enter the name, then press [OK] to confirm. 4 Enter the number, then press [Save] to confirm » Your new record is saved. Tip • If your phonebook memor y is full, t...
Page 25 - Call list type; Select the call list type; View the call records
23 EN 10 Call log The call log stores the call histor y of all missed or received calls. The incoming call histor y includes the name and number of the caller, call time, and date. This feature is available if you have registered to the caller ID ser vice with your ser vice provider. Your phone can ...
Page 27 - 1 Redial list
25 EN 11 Redial list The redial list stores the call histor y of dialed calls. It includes the names and/or numbers you have called. This phone can store up to 20 redial records. View the redial records Press [Redial] . » The dialed calls list is displayed. Save a redial record to the phonebook 1 Pr...
Page 28 - 2 Phone settings
26 EN 12 Phone settings You can customize the settings to make it your own phone. Set the date and time For fur ther information, see chapter 'Get star ted', sections 'Set the date and time' and 'Set the date and time format'. Auto answer When you activate the auto answer feature, you can connect to...
Page 29 - Name the handset; Set the display language
27 EN ECO mode ECO+ mode Handset icon display [Off] [Off] and are off. [Off] [On] is displayed only after the ECO+ mode is activated during standby mode . [On] [Off] is displayed. [On] [On] is displayed and changed to when the ECO+ mode is activated in standby mode. Name the handset The name of the ...
Page 30 - 3 Alarm clock; Set the alarm; Turn off the alarm; Before the alarm rings
28 EN 13 Alarm clock Your phone has a built-in alarm clock. Check the information below to set your alarm clock. Set the alarm 1 Select [Menu] . 2 Press / to select , then press [OK] to confirm. 3 Select [On/off] > [On] / [Off] , then press [OK] to confirm. 4 Select [Alarm time] , then press [OK]...
Page 31 - 4 Display settings; Set the brightness
29 EN 14 Display settings You can change the display of the phone during standby mode. Set the brightness You can set the brightness of the handset screen to different levels. 1 Select [Menu] . 2 Press / to select , then press [OK] to confirm. 3 Select [Brightness] , then press [OK] to confirm. 4 Se...
Page 32 - 5 Sound settings; Set the handset's ringtone; Exclude the contacts from silent
30 EN 15 Sound settings Set the handset's ringtone volume You can select among 5 ringtone volume levels or progressive (that is, the ringtone star ts soft and gets louder over time if the call is not answered). 1 Select [Menu] . 2 Press / to select , then press [OK] to confirm. 3 Select [Ring volume...
Page 33 - Set the key tone; Access the sound profile during a call
31 EN 2 Press / to select , then press [OK] to confirm. 3 Select [Silent mode] , then press [OK] to confirm. 4 Select [Exception] , then you can select from these two options: • Select [On] to activate, or [Off] to deactivate the silent mode, then press [OK] to confirm. • Select [Ring delay] , then ...
Page 34 - 6 Baby monitor; Activate/Deactivate the baby; Send an alert; Send to other handsets; Send to an external line
32 EN 16 Baby monitor Your phone suppor ts the baby monitor function which sends an aler t if the sound level exceeds the set limit. Caution • Make sure that you do not leave the handset that has the active monitor in the baby room. • Make sure the baby unit and the cord are always out of reach of t...
Page 35 - Send to a contact from the; Set the baby cry level
33 EN 3 Select [Send alert to] > [External line] , then press [OK] to confirm. 4 Enter a telephone number, then press [Save] to confirm. Note • You can still send an aler t to the external line even though it is in the barred list (see 'Add new number to the barred list' on page 39 ). Send to a c...
Page 37 - Record an announcement; Listen to the announcement; Restore the default announcement; Incoming messages
35 EN Record an announcement The maximum length of the announcement you can record is 3 minutes. The newly recorded announcement automatically replaces the old one. 1 Select [Menu] . 2 Press / to select , then press [OK] to confirm. 3 Select [Announcement] , then press [OK] to confirm. 4 Select [Ans...
Page 38 - Set the sound quality of the message; Set the ring delay
36 EN Listen to the incoming messages You can listen to the incoming messages in the sequence they are recorded. 1 Select [Menu] . 2 Press / to select , then press [OK] to confirm. 3 Select [Play] , then press [OK] to confirm. » New messages star t playing. Old messages star t playing if there is no...
Page 39 - Remote access; Change the PIN/passcode
37 EN Tip • When you access the answering machine remotely, you are recommended to set the ring delay to [Toll saver] mode. This is a cost effective way to manage your messages. When there are new messages, the answering machine picks up the call after 3 rings; When there is no messages, it picks up...
Page 40 - Auto conference; Activate/Deactivate auto conference; Call barring; Select the barring mode
38 EN 18 Services The phone suppor ts a number of features that help you handle and manage the calls. Auto conference To join an external call with another handset, press . Note • This feature is available only for multi-handset versions. Activate/Deactivate auto conference 1 Select [Menu] . 2 Press...
Page 41 - Auto prefix; Set auto prefix; Network type; Select the recall duration
39 EN » The setting is saved. Note • If you forget the PIN/passcode, you have to reset your phone (see 'Restore default settings' on page 42 ). Call list type You can set if you can see all calls or missed calls from the call log. Select the call list type 1 Select [Menu] . 2 Press / to select , the...
Page 42 - Dial mode; First ring; Turn the first ring on/off; Auto clock; Register additional handsets
40 EN 1 Select [Menu] . 2 Press / to select , then press [OK] to confirm. 3 Select [Recall time] , then press [OK] to confirm. 4 Select an option, then press [OK] to confirm. » The setting is saved. Dial mode Note • This feature is countr y dependent and only applies to models that suppor t both ton...
Page 43 - Unregister handsets
41 EN Auto registration Extra handsets of the same model can be auto- registered. Place the unregistered handset on the base station. » The handset detects the base station and registers automatically. » Registration is complete in less than two minutes. The base station automatically assigns a hand...
Page 44 - 9 Technical data
42 EN 19 Technical data General specification and features • Talk time: 18 hours • Standby time: 250 hours • Range indoor : 50 meters • Range outdoor : 300 meters • Phonebook list with 250 entries • Redial list with 20 entries • Call log with 50 entries • Answering machine with up to 60 minutes reco...
Page 49 - Text and number input tables
47 EN 22 Appendix Text and number input tables Key Upper case characters (for English/ French/ German/ Italian/Turkish/ Por tuguese/Spanish/Dutch/Danish/ Finnish/Norwegian/ Swedish/Romanian/ Polish/Czech/Hungarian/Slovakian/ Slovenian/Croatian/Lithuanian/Estonian/ Latvian/Bulgarian) 0 Space . 0 , / ...
