Philips Keychain Digital Camera - Manual
Philips Keychain Digital Camera – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TAKING A PICTURE; ) displays the number of pictures remaining.; Location of Controls; ) and the viewfinder will come; Location of Controls; you hear 1 beep. A photo was taken successfully.; AUTO STAND-BY MODE; blank. This helps to conserve battery power.; ADDITIONAL FEATURES
- Page 3 – Camera will return to normal operation mode.; Continuous shooting mode; High Resolution format
- Page 4 – Delete single photos; Image Resolutions
- Page 5 – Low Resolution format; indoor image capture; TO INSTALL THE SOFTWARE; Installation of AvailaSoft Software and Camera Driver
- Page 7 – After the AvailaSoft installation is completed, click; “FINISH”; . The system will ask you; OK”; complete the driver installation.; Installation of Camera driver; “New Hardware Found” & “Building Driver Information”; Wizard will
- Page 8 – and click the; “Browse”; button. Make sure the Software CD is in the CD-Rom; “MyCam CIF”; will be installed
- Page 9 – Uploading digital still pictures/AVI Video Clip; “MyCam CIF; Playing AVI video
- Page 10 – Using AvailaSoft Software to Create you own Photo Album; “Photo2Album” icon
- Page 12 – Exit; Options
- Page 13 – “No New Hardware Found” message appears:
- Page 14 – “Camera Driver”; To uninstall Photo2Album
- Page 15 – Note: Your computer needs a USB port to use your digital camera.
- Page 16 – Limited One-Year Warranty; FCC compliance
1
Keychain Digital Camera
The camera is capable of taking and storing up to 20 CIF (352 x 288) Images; or 60
Compressed CIF Images; or 81 QCIF (176 x 144) Images; or 243 Compressed QCIF Images, or
recording up to 10 seconds of AVI video. These may be uploaded to a PC via a USB port. The
camera is powered by one (1) AAA alkaline battery or through the USB port when attached to a
PC. Familiarize yourself with the different parts of your camera before attempting to operate the
camera.
LOCATION OF CONTROLS
1. Mode Button
2. LCD Display
3. Lens
4. Hook for Keychain
5. USB Port
6. Shutter
7. Slide switch for Viewfinder 8. Battery Door
9. Viewfinder
1.0 GETTING
STARTED
1. Slide open the Battery Door and insert 1 AAA alkaline battery into the battery
Compartment, make sure that the battery terminals (+ and -) are properly positioned.
2.
Close the Battery Door.
2.0
TURNING THE CAMERA ON
1. Insert 1 AAA battery into the battery compartment, the camera will turn on automatically.
The camera will beep twice and the LCD will display the number of pictures remaining in the
camera memory.
2. If the LCD is blank, press the Mode button (#9 from
Location of Controls
) once to turn the
camera on.
3. If
inactive
for
30 seconds, the camera will automatically go into stand-by mode for power
conservation. Press the mode button once to restore the camera to active mode.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Was this manual helpful?
About this manual
- Brand
- Philips
- Model
- Keychain Digital Camera
- Document type
- Manual
- Language(s)
- English
- Pages
- 16
- Format
Summary
2 3.0 TAKING A PICTURE 1. Verify the LCD (#2 from Location of Controls ) displays the number of pictures remaining. If the display is other than a number, press the mode button until a number is displayed. If this is the first time the camera has been activated, the LCD should read “20”. This number...
3 5.10 Normal Mode 1. The first time the camera is turned on a “20” will appear in the LCD display. 2. Pressing the Shutter button once and you will hear a short beeping sound, which indicates that a photo has been taken. 3. The number on the LCD display will automatically decrement by one. 4. If th...
4 3. Using Compressed mode while in Low Resolution format allows you take a maximum of 243 photos (see table below). 5.52 Non-compressed mode 1. Press the Mode button until “ ” (while camera is in Compressed mode) is displayed on the LCD, then press the Shutter Button to confirm the mode change. 2. ...
