Philips Jet Clean I - User Manual

Philips Jet Clean I

This manual details the filling procedure for Jet Clean I and Jet Clean II washing machines using the recommended HQ200 cleaning fluid. It provides clear, step-by-step instructions for both models, supported by diagrams. The guide is available in multiple languages to assist a wide range of users. Note that this document covers only the filling process, with no information on troubleshooting or maintenance.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
Page: / 5

Table of Contents:

  • Page 1 – Introduction and Filling Steps
  • Page 2 – Filling Instructions (Multiple Languages)
  • Page 3 – Filling Instructions (Multiple Languages)
  • Page 4 – Filling Instructions (Multiple Languages)
  • Page 5 – Filling Instructions (Multiple Languages)
Loading the manual

Jet Clean Solution

HQ200

ENGLISH

Introduction

There are two types of washing machines:

  • Jet Clean I (Fig. 1)
  • Jet Clean II (Fig. 2)

Filling instruction Jet Clean I

1 Remove the cleaning fluid container from the washing machine.(Fig. 3)

2 Remove the dosing cap from the fluid container. (Fig. 4)

3 Unscrew the cap from the bottle with cleaning fluid, remove the airtight seal and screw the cap back onto the bottle.

4 Fill the container with HQ200 cleaning fluid and tightly screw the dosing cap back onto the container.

5 Place the cleaning fluid container back into the washing machine in such a way that the top and front of the container are properly aligned with the housing of the washing machine. (Fig. 5)

Filling instruction Jet Clean II

1 Simultaneously press the release buttons on both sides of the cleaning chamber (1) and lift the washing machine off the cleaning chamber (2). (Fig. 6)

The cleaning chamber remains behind.

2 Unscrew the dosing cap from the bottle with cleaning fluid and remove the airtight seal.

3 Fill the cleaning chamber with HQ200 cleaning fluid up to the MAX indication. (Fig. 7)

4 Place the washing machine back onto the cleaning chamber. (Fig. 8)

Make sure the release buttons snap into place.

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 1 - Introduction and Filling Steps

Overview of Jet Clean I and II models with step-by-step instructions for filling the cleaning fluid container, including references to figures.

Page 2 - Filling Instructions (Multiple Languages)

Repeated filling instructions in Bulgarian, Ukrainian, and Czech for both Jet Clean I and II.

Page 3 - Filling Instructions (Multiple Languages)

Continued filling instructions in Estonian, Hungarian, Croatian, and Kazakh.

Tips

  • Always use the recommended HQ200 cleaning fluid.
  • Ensure the container is properly aligned and securely fastened.
  • For Jet Clean II models, make sure the release buttons snap into place after reassembly.