Philips HI525 - Manual - manualsarea.com

Page 5 - ENGLISH

ENGLISH 6 14 21 28 HI545, HI535, HI529, HI528, HI525, HI518, HI515

Page 6 - Important; Check the cord regularly for possible damage.; E N G L I S H

General description (fig. 1) A Spray nozzle B Filling opening with cap C Turbo-steam button 0 (HI545/35/29/28/25) D Shot-of-steam button 9 E Steam control- 0 = no steam- 1 = minimum steam output- 6 = maximum steam output F Spray button 8 G Auto-stop light H Temperature light I Temperature dial J Sof...

Page 7 - Filling the water tank; Never immerse the iron in water.

the iron even for a short while: set the steam control to positionO, put the iron on its heel and remove the mains plug from thewall socket. ◗ Always place and use the iron and the stand, if provided, on astable, level and horizontal surface. ◗ Do not put perfume, vinegar, starch, descaling agents, ...

Page 8 - Setting the temperature; Silk; Using the appliance; Steam ironing; Steam ironing is only possible at higher ironing temperatures.

C 5 Close the cap of the filling opening. Setting the temperature 1 Put the iron on its heel. C 2 Set the required ironing temperature by turning the temperature dial to the appropriate position. Check the care label for the required ironing temperature:- 1 Synthetic fabrics (e.g. acr ylic, nylon, p...

Page 9 - to; Ironing without steam; Features; Spray function; Never direct the steam towards people.

C 3 Select the appropriate steam setting. Make sure that the steam setting you select is suitable for the ironing temperatureselected: - 1 - 3 for moderate steam (temperature settings 2 to 3 ) - 3 - 6 for maximum steam (temperature settings 3 to MAX) B The iron will start steaming as soon as the set...

Page 10 - Turbo steam; The turbo-steam function helps remove difficult creases.; Drip stop; to MAX). Make sure that the steam setting you select; Electronic safety shut-off function; - When the iron is in horizontal position, this will happen after 30

Turbo steam 0 B Types HI545/35/29/28/25 only The turbo-steam function helps remove difficult creases. Only use the turbo-steam function at temperature settings between 3 and MAX. C 1 Press the turbo-steam button and hold it down for max. 5 seconds. 2 Release the button and wait at least 1 minute bef...

Page 11 - Cleaning and maintenance; After ironing; Do not use vinegar or other descaling agents.

Cleaning and maintenance After ironing 1 Remove the mains plug from the wall socket and let the iron cool down. 2 Wipe scale and any other deposits off the soleplate with a damp cloth and a non-abrasive (liquid) cleaning agent. To keep the soleplate smooth, you should avoid hard contact withmetal ob...

Page 12 - After the self-clean process; stains that may have formed on the soleplate.; Storage; Make sure the appliance is unplugged and set the steam control; Environment

After the self-clean process - Put the iron on its heel.- Put the plug in the wall socket and let the iron heat up to allow the soleplate to dr y. - Unplug the iron when the light has gone out.- Move the iron gently over a piece of used cloth to remove any water stains that may have formed on the so...

Page 13 - or contact the Philips Customer Care; Troubleshooting

Guarantee & service If you need information or if you have a problem, please visit the Philipswebsite at www.philips.com or contact the Philips Customer Care Centre in your countr y (you will find its phone number in theworldwide guarantee leaflet). If there is no Customer Care Centre inyour cou...