Page 3 - Contents
1 EN Contents 1 Important safety instructions 3 2 Your phone 4 What is in the box 4 Over view of the phone 5 Over view of the base station 6 3 Get started 7 Connect the base station 7 Install the supplied batteries 8 Configure your phone (countr y dependent) 8 Change the remote access PIN/passcode 9...
Page 6 - Your phone; What is in the box
4 EN 2 Your phone Congratulations on your purchase and welcome to Philips! To fully benefit from the suppor t that Philips offers, register your product at www.philips. com/welcome. What is in the box Handset** Base station (D630) Base station (D635) Charger Power adapter** Line cord* 2 x AAA rechar...
Page 7 - Overview of the phone
5 EN Overview of the phone a Earpiece b • Scroll up on the menu. • Increase the earpiece/speaker volume. • Access the phonebook in standby mode. c • Move the cursor to the right in editing mode. • Scroll to the right in main menu mode. d • Press to delete individual text or digit. Press and hold to ...
Page 8 - Overview of the base station
6 EN • Recall key (This function is network dependent.) o • Access the main menu in standby mode. • Confirm selection. • Enter the options menu • Select the function displayed on the handset screen directly above the key. p LED indicator • Off: no new event. • Flashing: new missed calls/new messages...
Page 9 - Get started; Connect the base station
7 EN 3 Get started Caution • Make sure that you have read the safety instructions in the 'Impor tant safety instructions' section before you connect and install your handset. Connect the base station Warning • Risk of product damage! Ensure that the power supply voltage corresponds to the voltage pr...
Page 10 - Install the supplied batteries; Configure your phone; Set the country; Set the date and time
8 EN Install the supplied batteries Caution • Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire. • Use only the supplied batteries. • Risk of decreased batter y life! Never mix different brands or types of batteries. Note • Charge the batteries for 8...
Page 11 - Set the date and time format; Change the remote access; Charge the handset; Check the battery level
9 EN Note • If the time is in 12-hour format, press to select [am] or [pm] (Countr y dependent). 6 Press [OK] to confirm. Set the date and time format 1 Select [Menu] . 2 Press / to select , then press [Select] . 3 Select [Date & time] , then press [OK] to confirm. 4 Select [Date format] or [Tim...
Page 12 - What is standby mode?; Switch the handset on or off
10 EN When the handset is off the base station/charger, the bars indicate the batter y level (from full to low). When the handset is on the base station/charger, the bars flash until charging is complete.The empty batter y icon flashes. The batter y is low and needs recharging. If you are on the pho...
Page 14 - Display icons
12 EN 5 Display icons In standby mode, the icons shown on the main screen tell you what features are available on your handset. Icon DescriptionsWhen the handset is off the base station/charger, the bars indicate the batter y level (from full to low). When the handset is on the base station/charger,...
Page 15 - Calls; Make a call; Normal call; Answer a call
13 EN 6 Calls Note • When the power fails, the phone cannot access emergency ser vices. Tip • Check the signal strength before you make a call or when you are in a call. Make a call You can make a call in these ways: • Normal call • Predial call • Call through the speed dial key You can also make a ...
Page 18 - Make a call to another; While you are on the phone; Make a conference call; During an external call
16 EN 7 Intercom and conference calls Note • This feature is available for multi- handset versions only. An intercom call is a call to another handset that shares the same base station. A conference call involves a conversation between you, another handset user and the outside callers. Make a call t...
Page 19 - During the conference call
17 EN » You are now in a 3-way conference call with an external call and a selected handset. 5 Press to end the conference call. Note • Press to join an ongoing conference with another handset if > [Conference] is set to [Auto] . During the conference call 1 Press [Int.] to put the external call ...
Page 20 - Enter text and numbers; Switch between uppercase
18 EN 8 Text and numbers You can enter text and numbers for handset name, phonebook records, and other menu items. Enter text and numbers 1 Press once or several times on the alphanumeric key to enter the selected character. 2 Press [Clear] to delete a character. Press and hold [Clear] to delete all...
Page 21 - Phonebook; View the phonebook; Search a record; Scroll the contact list; Call from the phonebook
19 EN 9 Phonebook This phone has a phonebook that stores up to 100 records. You can access the phonebook from the handset. Each record can have a name up to 16 characters long. It can store up to 3 numbers, with each number up to 24 digits long. There are 9 direct access memories (keys 1 to 9). Depe...
Page 22 - Add a record; Edit a record; Set the speed dial keys
20 EN Add a record 1 There are two ways to access the phonebook list: • press ; • select [Menu] . Press / to select , then press [Select] . 2 Select [Option] > [Add new] , then press [OK] to confirm. 3 Enter the name, then press [OK] to confirm. 4 Enter the mobile number, home number and/or offic...
Page 24 - Call list type; Select the call list type; View the call records
22 EN 10 Call log The call log stores the incoming call histor y of all missed, received or blocked calls. The incoming call histor y includes the name and number of the caller, call time and date. This feature is available if you have registered to the caller ID ser vice with your ser vice provider...
Page 26 - 1 Redial list
24 EN 11 Redial list The redial list stores the call histor y of dialed calls. It includes the names and/or numbers you have called. This phone can store up to 20 redial records. View the redial records Select [Redial] . Save a redial record to the phonebook 1 Press [Redial] to enter the list of dia...
Page 27 - 2 Sound settings; Set the handset's ringtone; Set the handset's ringtone for
25 EN 12 Sound settings Set the handset's ringtone volume You can select among 5 ringtone volume levels or progressive (that is, the ringtone star ts soft and gets louder over time if the call is not answered). 1 Select [Menu] . 2 Press / to select , then press [Select] . 3 Select [Ring volume] , th...
Page 28 - Access the sound profile during a call
26 EN » The setting is saved. Set the battery tone Batter y tone is the sound made when the batter y is low and needs recharging. 1 Select [Menu] . 2 Press / to select , then press [Select] . 3 Select [Battery tone] , then press [OK] to confirm. 4 Select [On] / [Off] , then press [OK] to confirm. » ...
Page 29 - 3 Phone settings; Display settings; Set the brightness; Eco mode
27 EN 13 Phone settings You can customize the settings to make it your own phone. Display settings You can change the display of the phone during standby mode. Set the brightness You can set the brightness of the handset screen to different levels. 1 Select [Menu] . 2 Press / to select , then press ...
Page 30 - Name the handset
28 EN The following table shows you the current status of the handset screen with different Eco mode and ECO+ mode settings. Eco mode ECO+ mode Handset icon display [Off] [Off] and are off. [Off] [On] is displayed only after the ECO+ mode is activated during standby mode . [On] [Off] is displayed. [...
Page 31 - 4 Alarm clock; Set the alarm; Turn off the alarm; Before the alarm rings; When the alarm rings
29 EN 14 Alarm clock Your phone has a built-in alarm clock. Check the information below to set your alarm clock. Set the alarm 1 Select [Menu] . 2 Press / to select , then press [Select] . 3 Select [On/off] > [On] / [Off] , then press [OK] to confirm. 4 Select [Alarm time] , then press [OK] to co...
Page 32 - 5 Privacy mode; Call barring (block outgoing
30 EN 15 Privacy mode You can access the privacy mode menu to block outgoing and incoming calls. Call barring (block outgoing calls) You can block outgoing calls to numbers, such as overseas calls or undesirable hotlines by barring calls that star t with cer tain digits. You can create 4 sets of num...
Page 33 - Activate/deactivate the blacklist; Silent mode; Exclude the contacts from silent
31 EN Example: Block number = 0123 Incoming call number = 0123456789 The call is blocked. Block number = 23456789 Incoming call number = 03123456789 The call is not blocked. Note • The contact's name in phonebook will not be displayed if this contact's number matches the record saved in the blacklis...
Page 34 - Change the privacy mode
32 EN 3 Select [Silent mode] , then press [OK] to confirm. 4 Select [Exception] , then you can select from these two options: • Select [On/off] > [On] / [Off] to activate/deactivate the silent mode, then press [OK] to confirm. • Select [Ring delay] , then select an option. 5 Press [OK] to confirm...
Page 35 - 6 Baby monitor; Activate/Deactivate the baby; Set the parent unit; Send to other handsets; Send to an external line
33 EN 16 Baby monitor You can use your phone as a baby monitor. The handset can be set as a baby unit. It sends an aler t to the parent unit (which can be an additional handset or an external line) if the sound level exceeds the set limit. Caution • Make sure the baby unit and the cord are always ou...
Page 36 - Send to a contact from the; Set the baby cry level
34 EN 4 Enter a telephone number, then press [Save] to confirm. Note • You can still send an aler t to the external line even though it is in the blacklist (see 'Blacklist' on page 30). • If the external line is in the outgoing call block list, it will be barred and the aler t will not be sent (see ...
Page 37 - Turn the answering machine; Through the base; Through the handset; Family notes
35 EN 17 Telephone answering machine Note • Available only for D635. Your phone includes a telephone answering machine that records unanswered calls when it is on. By default, the answering machine is set to the [Answer & rec.] mode. You can also access the answering machine remotely and change ...
Page 38 - Announcements; Record an announcement; Listen to the announcement; Restore the default announcement
36 EN • Select [Menu] , press / to select , then press [Select] . 2 Select [Voice language] , then press [OK] to confirm. 3 Select a language, then press [OK] to confirm. » The setting is saved. Announcements The announcement is the message your caller hears when the answering machine picks up the c...
Page 39 - Incoming messages; Listen to the incoming messages; From the handset; Delete an incoming message; From the base; Delete all old incoming messages; From the base
37 EN Incoming messages Each message can be up to 3 minutes long. When you receive new messages, the LED on the handset flashes. Note • If you pick up the phone when the caller leaves a message, the recording stops and you can talk to the caller directly. Note • If the memor y is full, the answering...
Page 40 - Call screening; Set the ring delay; Remote access; Change the PIN/passcode
38 EN Note • You can only delete the read messages. No deleted messages can be recovered. Call screening You can hear the caller while he is leaving a message. Press to answer the call. From the base Press / to adjust the speaker volume during call screening. Note • If you turn the speaker to the lo...
Page 41 - Access the answering machine remotely
39 EN » The setting is saved. Access the answering machine remotely 1 Make a call to your home number with a touch tone phone. 2 Enter # when you hear the announcement. 3 Enter your PIN/passcode. » You now have access to your answering machine, and you can listen to the new messages. Note • You have...
Page 42 - Auto conference; Activate/Deactivate auto conference; Network type; Auto prefix; Set auto prefix
40 EN 18 Services The phone suppor ts a number of features that help you handle and manage the calls. Call list type You can set if you can see all incoming calls or only missed calls from the call log. Select the call list type 1 Select [Menu] . 2 Press / to select , then press [Select] . 3 Select ...
Page 43 - Select the recall duration; First ring; Turn the first ring on/off; Auto clock
41 EN Note • This is a countr y dependent feature. • To enter a pause, press and hold . • If the prefix number is set and the detect number is left empty, the prefix number is added to all outgoing calls. • The feature is unavailable if the dialed number star ts with * and # . Select the recall dura...
Page 44 - Register additional handsets; Auto registration; Unregister handsets; Restore default settings
42 EN 2 Press / to select , then press [Select] . 3 Select [Auto clock] , then press [OK] to confirm. 4 Select [On] / [Off] , then press [OK] to confirm. » The setting is saved. . Register additional handsets You can register additional handsets to the base station. The base station can register up ...
Page 46 - 9 Technical data
44 EN 19 Technical data General specification and features • Talk time: 18 hours • Standby time: 250 hours • Range indoor : 50 meters • Range outdoor : 300 meters • Phonebook list with 100 entries • Redial list with 20 entries • Call log with 50 entries • Answering machine with up to 30 minutes reco...
Page 51 - Text and number input tables
49 EN 22 Appendix Text and number input tables Key Upper case characters (for English/ French/ German/ Italian/Turkish/ Por tuguese/Spanish/Dutch/Danish/ Finnish/Norwegian/ Swedish/Romanian/ Polish/Czech/Hungarian/Slovakian/ Slovenian/Croatian/Lithuanian/Estonian/ Latvian/Bulgarian) 0 Space . 0 , / ...
