Philips AJ3121 - Manual
Philips AJ3121 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – English
- Page 5 – You can use this set solely as a radio!
- Page 8 – SAFETY INFORMATION; device, the disconnet device shall remain readily operable.; CAUTION
- Page 9 – • Remedy; Occasional crackling sound during FM broadcast; • Adjust the position of the Pigtail; Continuous crackling/hiss disturbance during MW broadcast; • Move set away from other electrical equipment; The alarm does not function; • Tune to a radio station
- Page 11 – Printed in China; Meet Philips at the Internet
Clock Radio
User manual
Manuel d'utilisation
Manual del usuario
Benutzerhandbuch
AJ3121
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Was this manual helpful?
About this manual
- Brand
- Philips
- Model
- AJ3121
- Document type
- Manual
- Language(s)
- English
- Pages
- 11
- Format
Summary
English CONTROLS (see fig. 1 ) 1 SET TIME /ALARM SET - sets the clock time- sets the alarm time 2 HR / MIN - adjusts the hours / minutes for clock / alarm / sleep time 3 REPEAT ALARM / SLEEP OFF - switches off the active alarm for a 9 minutes period- switches off the radio sleep function 4 ALARM RES...
RADIO You can use this set solely as a radio! 1 Adjust RADIO / ALARM to RADIO ON to switch on the radio. 2 Select your waveband by adjusting the FM/MW switch. 3 Adjust TUNING to tune to your desired station. 4 Turn the VOLUME control to adjust the volume level. 5 Adjust RADIO / ALARM to OFF to switc...
SAFETY INFORMATION • Install the unit near the AC outlet and where the AC power cord plug can be easily reached. • Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnet device shall remain readily operable. • Place the set on a hard and flat surface so that the...
