Pelco IS20CHV10S - Manual

6 C3472M-C (9/10) We declare under our sole responsibility that the product to which this declaration relates is in conformity with the standards or other normative documents following the provisions of Directives 2006/95/EC and 2004/108/EC. Wij verklaren als enige aansprakelijke, dat het product wa...

8 C3472M-C (9/10) Description The IS20/IS21 Series Camclosure ® 2 camera system integrates a camera and lens package into a small versatile indoor enclosure that can be mounted directly to, or recessed into, a ceiling or wall. The IS20/IS21 Series features a three-axis camera and lens positioning sy...

C3472M-C (9/10) 9 Product Overview (Day/night model shown) Figure 1. Product Overview of IS20-DN Camera ì Video Output Connector: Transmits composite video signals. î Power Cable: Supplies 24 V AC or 12 V DC from an external power source. ï Panning Table Lock Screw (LOCK): Fixes the panning table. ñ...

C3472M-C (9/10) 11 Installation The following installation should be performed by qualified service personnel or system installers. NOTES: • Procure 4 mounting screws according to the material of the installation area. In this case, wood screws and nails should not be used. • The recommended tighten...

C3472M-C (9/10) 13 MOUNTING THE CAMERA The mounting requirements are shown as follows: *Make sure that the installed mount bracket can support more than five times the weight of the camera. USING A 2-GANG JUNCTION BOX 1. Install the 2-gang junction box (not supplied) onto the wall/ceiling. a. When u...

16 C3472M-C (9/10) WIRING Figure 9. Video Output Connector and Power Cable VIDEO OUTPUT CONNECTION NOTE: When connecting the coaxial cable to the video output connector, make sure that the connector of the coaxial cable is locked firmly. Connect the video output connector to the monitor, or other sy...

C3472M-C (9/10) 17 POWER CONNECTION Connect the 3-conductor cable of the camera to the power supply. Figure 10. Power Cable Table B. Power Wire Colors and Functions Wire Color 12 V DC 24 V AC Brown Positive Live Blue Negative Neutral Green/yellow — Grounding WARNINGS: • Be sure to connect the GND (g...

18 C3472M-C (9/10) CABLE LENGTH AND WIRE GAUGE 24 V AC The voltage supplied to the power terminals of the camera should be within 19.5 V AC and 28 V AC. 12 V DC Use the formula below to calculate the power cable and power supply. The voltage supplied to the power terminals of the camera should be wi...

C3472M-C (9/10) 19 IMAGE ADJUSTMENT PAN, TILT, AND AZIMUTH ADJUSTMENT 1. Rotate the panning table (320-degree range) to adjust the panning position of the camera (refer to Figure 11). The adjusting range is from +180 degrees (clockwise) to –140 degrees (counterclockwise). 2. Tighten the panning tabl...

C3472M-C (9/10) 21 ZOOM AND FOCUS ADJUSTMENT 1. Loosen the zoom lock lever and move the lever between TELE and WIDE to obtain the appropriate angle of view (refer to Figure 14). 2. Tighten the zoom lock lever. 3. Loosen the focus lock lever and move the lever between FAR and NEAR to obtain the optim...

22 C3472M-C (9/10) ASSEMBLING THE CAMERA 1. Mount the top cover (refer to Figure 15): a. Adjust the marker of this unit to “I” on the top cover to install the top cover. Figure 15. Mounting the Top Cover b. Rotate the top cover clockwise to adjust the marker to “II.” ì Marker î Top Cover ï Dome Cove...

C3472M-C (9/10) 25 Specifications Power Source and Consumption PAL 24 V, 50 Hz, 2.7 W (AC); 12 V, 220 mA (DC) NTSC 24 V, 60 Hz, 2.7 W (AC); 12 V, 220 mA (DC) Image Sensor 1/3 inch interline transfer CCD Effective Pixels PAL 752 (H) x 582 (V) NTSC 768 (H) x 494 (V) Scanning Area 4.9 (H) x 3.7 (V) mm ...

PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years: – Fiber optic products – Unshi...