Peerless SF 632P - Manual
Peerless SF 632P – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Tools Needed for Assembly; • phillips screwdriver; Accessories; WARNING; Table of Contents
- Page 3 – Parts List
- Page 4 – Installation to Single Wood Stud Wall; Skip to step 2 on page 7 for VESA 75 mm and 100 mm patterns.; screws, greatly reducing their holding power.
- Page 5 – Installation to Solid Concrete or Cinder Block; • Always attach concrete expansion anchors directly to; • Tighten screws so that wall plate is firmly attached,
- Page 6 – tightly secured, damage may occur to screen or product may fail.; FOR VESA 200 MOUNTING PATTERN:; Skip to step 4 on page 8.
- Page 7 – secured, damage may occur to screen or product may fail.
- Page 8 – Installing and Removing Flat Panel Screen; • Do not lift more weight than you can handle. Use; • Failure to lock hook bracket with screws (D) can; cause screen to come off mount if hit accidentally.; CAUTION; DETAIL 1
Max UL Load Capacity: 115 lb (52.2 kg)
3215 W. North Ave. • Melrose Park, IL 60160 • (800) 729-0307 or (708) 865-8870 • Fax: (708) 865-2941 • www.peerlessmounts.com
ISSUED: 04-20-05 SHEET #: 201-9429-6 02-01-06
Features:
• For 10" to 37" flat panel screens
• Ultra-slim design holds the screen flat against the wall
Installation and Assembly:
Universal Flat Wall Mount for 10" - 37" LCD Flat Panel
Screens
Models: SF 635P, SF 635P-S, SF 635, SF 635-S, SF 632P, SF 632P-S, SF 632,
SF 632-S
This product is UL Listed. It must be
installed by a qualified professional
installer.
R
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 of 8 ISSUED: 04-20-05 SHEET #: 201-9429-6 02-01-06 Note: Read entire instruction sheet before you start installation and assembly. Tools Needed for Assembly • stud finder ("edge to edge" stud finder is recommended) • phillips screwdriver • drill • 1/4" bit for concrete and cinder block...
3 of 8 ISSUED: 04-20-05 SHEET #: 201-9429-6 02-01-06 S F 635P , S F 635P -S , S F 635, S F 635-S , S F 632P S F 632P -S S F 632 S F 632-S De scri pti on Qty P a rt # P a rt # P a rt # P a rt # A wall plat e 1 095-1320 095-4320 095-1320 095-4320 B hook brac k et 1 095-1321 095-4321 095-1321 095-4321 ...
4 of 8 ISSUED: 04-20-05 SHEET #: 201-9429-6 02-01-06 Installation to Single Wood Stud Wall 1 Use a stud finder to locate the edges of the stud. Use of an edge-to-edge stud finder is highly recommended. Basedon its edges, draw a vertical line down the stud’s center. Place wall plate (A) on wall as a ...
