Page 2 - WARNING; Table of Contents
2 of 20 ISSUED: 02-05-09 SHEET #: 202-9312-1 • Do not begin to install your Peerless product until you have read and understood the instructions and warnings contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, for US customers please call Pe...
Page 3 - Parts List
3 of 20 ISSUED: 02-05-09 SHEET #: 202-9312-1 B E H C F G I J A M N O D K L P Parts may appear slightly different than illustrated. Before you begin, make sure all parts shown are included with your product. PWV240/BKPP740 Description Qty. Part # A wall mount assembly 1 095-0545-GB B concrete anchor ...
Page 4 - Installation to Wood Stud Wall
4 of 20 ISSUED: 02-05-09 SHEET #: 202-9312-1 Installation to Wood Stud Wall Using a stud finder, locate and mark the edges of the wood stud used in mounting this product. Use of an edge to edge stud finder is highly recommended. Use a level to draw a vertical line down the center of the stud. Use wall...
Page 5 - Installation to Solid Concrete and Cinder Block
5 of 20 ISSUED: 02-05-09 SHEET #: 202-9312-1 Installation to Solid Concrete and Cinder Block Level and use wall plate as template to mark center of holes. Drill two 5/16" (8 mm) dia. holes to a minimum depth of 2.5" (64 mm). Insert anchors ( B ) in holes flush with wall. Place wall mount ( A ...
Page 6 - Attaching Adapter Plate to Screen with VESA
6 of 20 ISSUED: 02-05-09 SHEET #: 202-9312-1 L M N K N E G N Attaching Adapter Plate to Screen with VESA ® 200 x 100 or 200 x 200 Mounting Pattern Attach hook bracket ( M ) to adapter plate ( N ) using four M5 x 6 mm screws ( K ) and #10 washers ( L ) as shown. 2 FOR VESA ® 200 x 100 MOUNTING PATTER...
Page 7 - Attaching Hook Bracket to Screen with VESA
7 of 20 ISSUED: 02-05-09 SHEET #: 202-9312-1 Attaching Hook Bracket to Screen with VESA ® 75 or 100 Mounting Pattern FOR VESA ® 75 MOUNTING PATTERN: Choose hole pattern as shown below. Attach hook bracket ( M ) to back of screen using four M4 x 10 mm screws ( E ) as shown below. *NOTE: If hole patte...
Page 8 - FOR INSTALLING TO PEERLESS LC MODEL ADAPTER BRACKET
8 of 20 ISSUED: 02-05-09 SHEET #: 202-9312-1 • If screws don't get three complete turns in the screen inserts or if screws bottom out and bracket is still not tightly secured, damage may occur to screen or product may fail. WARNING GENERIC ADAPTER BRACKET FOR INSTALLING TO PEERLESS LC MODEL ADAPTER ...
Page 9 - Installing and Removing Flat Panel Screen; CAUTION
9 of 20 ISSUED: 02-05-09 SHEET #: 202-9312-1 Adjust tension knob on side of mount shown in fig. 4.1 to desired tension to balance your screen size and weight. Push or pull from top or bottom of screen to adjust tilt as shown. The tilt can be adjusted to a maximum of 15° forward or 5° backward. 4 • Be...
Page 10 - Cord Management and Arm Tension Adjustment
10 of 20 ISSUED: 02-05-09 SHEET #: 202-9312-1 P A ARM TENSION ADJUSTMENT: If more or less tension is desired in the arm pivot points, do the following: • To increase tension, turn tension screw(s) clockwise with allen wrench. • To reduce tension, turn tension screw(s) counter-clockwise with allen wr...
Page 11 - Anbringung und Zusammenbau:; UL
Merkmale: • Für LCD-Bildschirme von 22 bis 40 Zoll (56 - 102 cm) • Zwei spannbare Gelenke bieten vielseitige Einstellmöglichkeiten des Betrachtungswinkels • Kompatibel mit VESA® 75/100/200 x 100/200 x 200 • Flach an die Wand klappbare Ausführung spart Platz Anbringung und Zusammenbau: Paramount™-Sch...
Page 12 - ACHTUNG; Inhaltsverzeichnis
12 of 20 AUSGEGEBEN: 02-05-09 BLATT NR.: 202-9312-1 • Beginnen Sie mit der Anbringung Ihres Peerless-Produkts erst, nachdem Sie die in dieser Montageanleitung enthaltenen Anleitungen und Achtungshinweise gelesen und sich gründlich mit ihnen vertraut gemacht haben. Falls Sie Fragen hinsichtlich irgen...
Page 13 - Teileliste
13 of 20 AUSGEGEBEN: 02-05-09 BLATT NR.: 202-9312-1 B E H C F G I J A M N O D K L P DieTeile können leicht anders als dargestellt. Bevor Sie beginnen, stellen Sie sicher, dass alle Teile gezeigt werden, die mit Ihrem Produkt. PWV240/BKPP740 Beschreibung Anz. Teilenr # A Wandhaltereinheit 1 095-0545-...
Page 14 - Anbringung an Wand Holzständerreihen
14 of 20 AUSGEGEBEN: 02-05-09 BLATT NR.: 202-9312-1 Anbringung an Wand Holzständerreihen Hinweis: Wenn ein Bildschirm mit einem Gewicht über 45 kg montiert werden soll, wird die Befestigung an drei Holzständern nahegelegt. Fahren Sie auf Seite 6 fort. Bestimmen Sie die Kanten der Ständer mithilfe ei...
Page 15 - Anbringung an Massivbeton oder Porenbetonstein
15 of 20 AUSGEGEBEN: 02-05-09 BLATT NR.: 202-9312-1 Anbringung an Massivbeton oder Porenbetonstein Achten Sie darauf, dass die Wandplatte ( A ) waagerecht ist und verwenden Sie sie als Schablone zum Markieren der beiden Montagebohrungen. Bohren Sie zwei Löcher mit einem Durchmesser von 8 mm (5/16 Zo...
Page 18 - BEFESTIGUNG AN PEERLESS-ADAPTERHALTERUNG MODELL LC; BEFESTIGUNG AN PEERLESS-ADAPTERHALTERUNG MODELL PLP
18 of 20 AUSGEGEBEN: 02-05-09 BLATT NR.: 202-9312-1 GENERISCHE ADAPTERPLATT BEFESTIGUNG AN PEERLESS-ADAPTERHALTERUNG MODELL LC Die Schnittstellenliste für LCD- oder Plasmabildschirme auf unserer Website www.peerlessmounts.com gibt Auskunft über die Kompatibilität Ihres Bildschirms. Sie können sich a...
Page 19 - Anbringung und Abnahme des Flachbildschirms; VORSICHT
19 of 20 AUSGEGEBEN: 02-05-09 BLATT NR.: 202-9312-1 Zur Befestigung des Bildschirms am Wandhalter ( A ) halten Sie den Bildschirm schräg und senken die Hakenhalterung ( M ) wie in Abbildung 3.1 dargestellt in die Aussparungen des Wandhalters ab. Nachdem die Klemmen eingerastet sind, drücken Sie sie ...
Page 20 - Kabelführung und Einstellung der Armspannung
20 of 20 AUSGEGEBEN: 02-05-09 BLATT NR.: 202-9312-1 P A • Zum Erhöhen der Spannung drehen Sie die Spannungsschraube(n) mit einem Inbusschlüssel nach rechts. • Zum Verringern der Spannung drehen Sie die Spannungsschraube(n) mit einem HINWEIS: Drehen Sie die Schraube um nicht mehr als eine halbe Umdre...