Peerless PLAV 60-S - Manual
Peerless PLAV 60-S – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – • Never exceed the Maximum UL Load Capacity of 175 lb (79 kg).; WARNING; Tools Needed for Assembly; • drill; Accessories
- Page 3 – Parts List
- Page 4 – Installation to Wood Stud Wall; Skip to step 2 on page 6.
- Page 5 – Installation to Concrete Wall
- Page 6 – DETAIL 2
- Page 7 – • Do not overtighten screws! Overtightening may hinder; CAUTION
- Page 8 – • After tilt is adjusted, all fasteners must be tightened.
- Page 9 – • To raise screen, turn socket screw shown in figure
3215 W. North Ave. • Melrose Park, IL 60160 • (800) 729-0307 or (708) 865-8870 • Fax: (708) 865-2941 • www.peerlessmounts.com
ISSUED: 05-02-06 SHEET #: 202-9112-3 12-05-06
Models: PLA 60, PLA 60-S,
PLAV 60, PLAV 60-S
Installation and Assembly
-
Articulating Swivel Arm for
37" - 60" Plasma Screens
Maximum UL Load Capacity:
175 lb (79 kg)
This product is UL Listed. It must be
installed by a qualified professional
installer.
R
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 of 9 ISSUED: 05-02-06 SHEET #: 202-9112-2 06-21-06 Read instruction sheet before you start installation and assembly. Installations: To Wood Stud Walls ...................................................................................................... page 4 To Concrete Walls .....................
3 of 9 ISSUED: 05-02-06 SHEET #: 202-9112-3 12-05-06 P D Before you start make sure all partslisted are included with your product. Parts List K M S C A E F H B J N R L Q Some parts may appear slightly different than illustrated. G O PLA 60 PLA 60-S PLAV 60 PLAV 60-S DESCRIPTION QTY. PART # PART # P...
4 of 9 ISSUED: 05-02-06 SHEET #: 202-9112-2 06-21-06 • Installer must verify that the supporting surface will safely support the combined load of the equipment and all attached hardware and components. • Tighten wood screws so that wall plate is firmly attached, but do not overtighten. Overtightenin...
