Peerless PJRL411 - Manual
Peerless PJRL411 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – USE ONLY RAWL; CONCRETE ANCHOR INSTALLATION
- Page 4 – Notch on interface bracket indicates front of projector.
- Page 5 – Position four tabs in; SECURITY OPTION; Rotate mount to desired position and retighten screws.; Final Alignment
ISSUED: 09-09-02 SHEET #: 054-9122-3 11-11-03
Visit the Peerless Web Site at www.peerlessindustries.com
For customer service call 1-800-729-0307 or 708-865-8870.
1 of 5
IMPORTANT! Read entire
instruction sheet before you
start installation and assembly.
WARNING! Installer must verify
that the ceiling will safely
support the combined weight of
the Base Unit, Projector Adapter
Plate, and video projector.
This product contains all mounting hardware for direct attachment to a wood joist
ceiling. Concrete anchors (accessory kit ACC200, see page 2) sold separately.
This product is to be used in combination with one of several Projector Adapter
Plates (PAP models).
To order Projector Adapter Plates, Extension Columns, or additional mounting
hardware call customer service at 1-800-729-0307 or 708-865-8870.
Before you start check the parts list below to make sure all of the parts shown
are included.
Installation and Assembly- Encore™ Projector Mount
Model: PJRL411
*
Four .406 dia. holes provided for threaded rod
installations. Materials and procedure for such
installations are the sole responsibility of the installer.
Peerless Industries, Inc., 1980 Hawthorne Avenue, Melrose Park, IL 60160
www.peerlessindustries.com
Qty.
1
2
9
1
2
1
1
1
3
1
1
Parts List
B
C
F
Note: Actual parts may appear slightly different than illustrated.
J
A
H
G
I
Parts G, H, and I are used only for installations that
incorporate an extension column.
*
K
E
Description
A
projector mount ceiling plate
B
washer head wood screw
#14 x 2.5 (6mm x 65mm)
C
M6 x 1 x 20mm socket head screw
w/ flat and lock washer
D
security allen wrench
E
M5 x .8 x 8mm socket pin screw
F
main bracket assembly
G
fiber washer
H
retaining collar
I
M5 x .8 x 10mm socket pin screw
J
roll adapter bracket
K
interface bracket
Part Number
054-1003
5S1-015-C03
520-1029
560-9646
520-1062
054-1044
540-9432
1800-375
520-1164
054-1050
055-1251
D
Protected by U.S. Patent No. 6,042,068
© 2003 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
Encore is a trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.
R
This product is intended for use with UL
Listed products and must be installed by a
qualified professional installer.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
ISSUED: 09-09-02 SHEET #: 054-9122-3 11-11-03 Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870. 2 of 5 wood joist ceiling A Attachment to a Wood Joist. Use a stud finder to locateceiling joist. Drill two 5/32" (4mm) dia. holes 2.5...
ISSUED: 09-09-02 SHEET #: 054-9122-3 11-11-03 Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870. 4 of 5 Place interface bracket (K) on top of adapterplate as shown. Fasten interface bracket (K) to adapter plate using twoM5 socket-pin s...
ISSUED: 09-09-02 SHEET #: 054-9122-3 11-11-03 Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870. 5 of 5 ceiling( c u t a w a y ) Position four tabs in interface bracket ( K ) behind four tabs in base unit. Slide forward to engage latch...
