Peavey SP 118X - Manual
Peavey SP 118X – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Description; Frequency Response; Figure 1; Impedance; Figure 2
- Page 3 – Harmonic Distortion at 1/10 Rated Power; Figure 6; Harmonic Distortion at 1/100 Rated Power; Figure 5
- Page 4 – SP; Features and specifications subject to change without notice.
SP
™
118X
4 Ohms
SPECIFICATIONS
Frequency response, 1 meter
on-axis, swept-sine in anechoic
environment:
50 Hz - 128 Hz (±3 dB)
Usable low frequency limit
(-10 dB point):
31 Hz
Power handling:
Full Range:
500 W continuous
1,000 W program
2,000 W peak
Sound pressure level, 1 Watt,
1 meter in anechoic environment:
Full Range:
98.0 dB SPL, (2.00 V input)
Sub Bass Section:
98.0 dB SPL, (2.00 V input)
Maximum sound pressure level
(1 meter):
Full Range:
125.0 dB SPL continuous
131.0 dB SPL peak
Sub Bass Section:
125.0 dB SPL continuous
131.0 dB SPL peak
Transducer complement:
Low Frequency Section:
1x 18 in., vented
1808 8 SPS BWX
Box tuning frequency:
Low Frequency Section:
39 Hz
Harmonic distortion:
1% rated power
2nd Harmonic:
100 Hz:
1.12%
1 kHz:
0.06%
3rd Harmonic:
100 Hz:
0.33%
1 kHz:
0.25%
10% rated power
2nd Harmonic:
100 Hz:
3.14%
1 kHz:
0.07%
3rd Harmonic:
100 Hz:
0.12%
1 kHz:
0.35%
Crossover frequency (internal
passive):
Sub Bass - Low Frequency:
125 Hz
High Out - Mid / High Frequency:
125 Hz
Impedance (Z):
Full Range:
Nominal: 4.0
Ω
Minimum: 3.9
Ω
Sub Bass (direct input):
Nominal: 4.0
Ω
Minimum: 4.4
Ω
Input connections:
One 1/4 in. phone jack passive input,
One 1/4 in. phone jack passive hi out,
One Neutrik
®
NL4 direct input
Enclosure materials and finish:
3/4" OSB and MDF, finished in carpet
Dimensions (H x W x D):
Front:
32.50 in. x 20.75 in. x 29.97 in.
826 mm x 527 mm x 761 mm
Rear:
32.50 in. x 20.57 in. x 29.97 in.
826 mm x 522 mm x 761 mm
Net weight:
125 lbs. (56.9 kg)
Features:
This loudspeaker system delivers high
output, low distortion bass from a single
1808-8 SPS BWX woofer mounted in a
vented enclosure. A versatile passive
crossover is included, which provides a
filtered high-pass output and direct input.
It is designed for portability and includes
handles, metal grille, reinforcing corners,
durable carpet finish and rubber feet. A
pole mount is included for mounting of a
high-pass enclosure.
S P E C S
P E A V E Y
E L E C T R O N I C S
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Description The SP 118X 4 Ohm is an add-onsubwoofer designed to make it easy toadd more low end to the SP X Series orother full-range speaker systems. Otheruses include bass guitar and drummonitoring.The enclosure is constructed of 3/4" highdensity OSB and MDF, and covered with aheavy-duty black...
20 50 100 200 500 1k 2k 5k 10k 20k Frequency (Hz) 60 70 80 90 100 110 120 130 dB SPL (re 20 Pa) Harmonic Distortion at 1/10 Rated Power Figure 6 3rd Harmonic 2nd Harmonic 20 50 100 200 500 1k 2k 5k 10k 20k Frequency (Hz) 50 60 70 80 90 100 110 120 dB SPL (re 20 Pa) Harmonic Distortion at 1/100 Rated...
SP ™ 118X 4 OHMS INPUT Features and specifications subject to change without notice. Peavey Electronics Corporation • 711 A Street • Meridian • MS • 39301 (601) 483-5365 • FAX (601) 486-1278 • www.peavey.com ©2001 Printed in the U.S.A. 6/01 80304860
