Peavey SP 2X - Manual
Peavey SP 2X – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Figure 1; Impedance; Figure 2
- Page 3 – This unit is not designed for; + 2 YEAR LIMITED WARRANTY; For details, refer to the; Figure 4; Figure 3
- Page 4 – Features and specifications subject to change without notice.
SP
™
2X
SPECIFICATIONS
Frequency response, 1 meter
on-axis, swept-sine in anechoic
environment:
53 Hz — 16 kHz (±3 dB)
Usable low frequency limit
(-10 dB point):
44 Hz
Power handling:
Full Range:
500 W continuous
1,000 W program
2,000 W peak
Low Frequency Section:
500 W continuous
1,000 W program
2,000 W peak
High Frequency Section:
60 W continuous
120 W program
240 W peak
Sound pressure level, 1 Watt,
1 meter in anechoic environment:
Full Range:
98.0 dB SPL, (2.83 V input)
Low Frequency Section:
99.0 dB SPL, (2.83 V input)
High Frequency Section:
107.0 dB SPL, (2.83 V input)
Maximum sound pressure level
(1 meter):
Full Range:
125.0 dB SPL continuous
131.0 dB SPL peak
Low Frequency Section:
126.0 dB SPL continuous
132.0 dB SPL peak
High Frequency Section:
124.8 dB SPL continuous
130.8 dB SPL peak
Transducer complement:
Low Frequency Section:
1x 15 in. woofer, vented
1508-8 HE BWX
High Frequency Section:
1x .875 in. exit/51 mm voice coil
compression driver on CD horn
Rx22
™
on a CH
®
-941
Box tuning frequency:
Low Frequency Section:
53 Hz
Harmonic distortion:
1% rated power
2nd Harmonic:
100 Hz:
1.62%
1 kHz:
0.22%
3rd Harmonic:
100 Hz:
0.52%
1 kHz:
0.63%
10% rated power
2nd Harmonic:
100 Hz:
5.09%
1 kHz:
0.81%
3rd Harmonic:
100 Hz:
1.97%
1 kHz:
0.92%
Crossover frequency (internal
passive):
Low Frequency — High Frequency:
1,600 Hz
Recommended active crossover
frequency region and slope:
Low Frequency — High Frequency:
1,600 Hz at 18 dB/octave
Time offset:
Low frequency:
0.00 ms
High frequency:
0.65 ms
Impedance (Z):
Full Range:
Nominal:
8.0 Ω
Minimum:
7.2 Ω
Low Frequency:
Nominal:
8.0 Ω
Minimum:
6.1 Ω
High Frequency:
Nominal:
8.0 Ω
Minimum:
6.0 Ω
S P E C S
P E A V E Y
E L E C T R O N I C S
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Input connections: 2x 1/4 in. phone jack and 1x Neutrik ® NL4 Speakon ® (Biamp only) Enclosure materials and finish: 3/4" OSB finished in black carpet Mounting provisions: This unit is not designed for overheadsuspension Dimensions (H x W x D): Front: 33.25 in. x 21.00 in. x 22.75 in.845 mm x 53...
upon having a minimum of 3 dB ofamplifier headroom available. Harmonic Distortion Second and third harmonic distortions vs.frequency are plotted in figures 3 and 4 fortwo power levels. Ten percent (10%) ofrated input power and either one percent(1%) of rated input power or one Watt,whichever is grea...
SP ™ 2X INPUT Features and specifications subject to change without notice. Peavey Electronics Corporation • 711 A Street • Meridian • MS • 39301 (601) 483-5365 • FAX (601) 486-1278 • www.peavey.com ©2001 Printed in the U.S.A. 3/01 80304850
