Peavey SP 218 - Manual
Peavey SP 218 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Description; Speakon; Frequency Response; For details, refer to the; SPECIFICATIONS SP
- Page 3 – Impedance
- Page 4 – SPECIFICATIONS SP
Frequency Response, 1 meter on-axis,
swept-sine in anechoic environment:
51 Hz to 300 Hz (±3 dB)
Usable Low Frequency Limit (-10 dB
point):
40 Hz
Power Handling:
1,200 Watts continuous
2,400 Watts program
4,800 Watts peak
Sound Pressure Level, 1 Watt, 1 meter
in anechoic environment:
99.0 dB SPL
(2.00 V parallel input)
Maximum Sound Pressure Level
(1 meter):
130 dB SPL continuous
136 dB SPL peak
Radiation Angle measured at -6 dB
point of polar response:
Essentially omnidirectional
Transducer Complement:
2 x 18" woofer, vented
1808-8 ALCP Pro Rider
®
Box Tuning Frequency:
43 Hz
Minimum Recommended Active
Crossover Frequency and Slope for Bi-
amping:
90 Hz at 18 dB/octave
High pass filter 35 to 40 Hz at
12 to 24 dB/octave is recommended
Impedance ( Z ):
Parallel input:
nominal 4.0 Ω
minimum: 3.3 Ω
Dual-woofer input:
nominal 2 x 8.0 Ω
minimum: 2 x 6.6 Ω
Input Connections:
One four-pin Neutrik
®
Speakon
®
non-switching jack
One four-pin Neutrik Speakon
switching jack
Two 1/4" jacks
Enclosure Materials & Finish:
Birch plywood with internal bracing
Dimensions (H x W x D):
Width: 21.625" / 549 mm
Depth: 29.625" / 752 mm
Height: 42.5 " / 1080 mm
Net Weight:
121.7 lbs. (55.3 kg)
Features
This loudspeaker system delivers high
output, low distortion bass from two
18" Pro Rider woofers mounted in a
vented enclosure. It is designed for
portability and includes handles, metal
grille, reinforced corners, a durable
carpet exterior, casters and rubber feet.
A pole mount is included for support of
a high-pass enclosure. A remarkable
reduction in weight has been made
possible by using top-quality birch
plywood construction instead of the
usual composite wood materials, even
though power handling has been
increased.
SPECIFICATIONS SP
™
218
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Description The SP 218 is a subwoofer designedto make it easy to add more low-endto the SP Series or other full-rangespeaker systems. Other uses includebass guitar, keyboard and drummonitoring. The enclosure is constructed of top-quality birch plywood with internalbraces, covered with heavy dutyblac...
SPECIFICATIONS SP ™ 218 20 50 100 200 500 1k 2k 5k 10k 20k Frequency (Hz) 60 70 80 90 100 110 dB SPL (re 20 Pa) Amplitude Response (1W 1m On-Axis) Figure 1 20 50 100 200 500 1k 2k 5k 10k 20k Frequency (Hz) 1 2 3 5 10 20 30 50 100 Impedance Z ( ) Figure 2 20 50 100 200 500 1k 2k 5k 10k 20k Frequency ...
SPECIFICATIONS SP ™ 218 Features and specifications subject to change without notice. Peavey Electronics Corporation • 711 A Street • Meridian • MS • 39301 • (601) 483-5365 • FAX (601) 486-1278 • www.peavey.com ©2004 Printed in the U.S.A. 5/04 80304989 SP 218 Input Plate
