PASCO ME-6617 - Manual
PASCO ME-6617 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Rocket Engine Test Bracket; Important Safety Notes; number 9 of the NAR Safety Code is of particular importance:; Do not; Use ony Series AD Estes model rocket engines.
- Page 3 – Setup; Set up the equipment; Figure 1; Attaching the Rocket Engine Test Bracket to the Force; screwdriver; Figure 2; Inserting the igniter into the model rocket engine; igniter; rod stand
- Page 4 – Figure 5; Graph of typical experimental results of a test of an Estes; Limited Warranty; For the 500 interface in remote mode,; Data Collection; Science Workshop; Figure 4; Completed experimental setup; cable clips
Instruction Sheet
for the PASCO
Model ME-6617
ROCKET ENGINE TEST BRACKET
012-06418A
10/97
$1.00
© 1997 PASCO scientific
Editor: Sunny Bishop
Introduction
The PASCO ME-6617 Rocket Engine Test Bracket is
designed for use with the PASCO CI-6537 Force Sensor
and a PASCO computer interface to determine the
magnitude of impulse of Estes
model rocket engines
(series A D). By permitting the measurement of the
impulse of an Estes model rocket engine, the Rocket
Engine Test Bracket can augment rocketry studies, such
as those detailed in the Estes Educator
Teacher
Resources
1
.
Equipment
Included:
Rocket Engine Test Bracket
Additional Required:
Estes
Model Rocket Engine (series A, B, C, or D)
Estes launch controller
Large Rod Stand (ME-8735)
90 cm support rod (ME-8738)
Force Sensor (CI-6537)
Science Workshop
and a PASCO computer inter-
face (300, 500, or 700)
computer
better
teach science
ways to
Phone (916) 786-3800 • FAX (916) 786-8905 • web: www.pasco.com
10101 Foothills Blvd. • P.O. Box 619011 • Roseville, CA 95678-9011 USA
®
The Rocket Engine Test Bracket
should be used only in a supervised
class setting by personnel who are
familiar with the National Association
of Rocketry Safety Code and after
complying with any state regulations
for igniting rocket engines.
1
➤
Note:
Because of its remote data logging
capability, the PASCO 500 Interface is the most
practical computer interface to use with the
Rocket Engine Test Bracket.
1
For more information, contact Estes Industries, 1295
H. St., Penrose, CO 81240, 1-800-820-0202
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Rocket Engine Test Bracket 012-06418A 2 Important Safety Notes ➤ Read all the warnings and follow the instructions provided with the Estes Model Rocket Engine and Igniter. ➤ Review the National Association of Rocketry (NAR) Safety Code prior to igniting a rocket engine. Point number 9 of the NAR Saf...
012-06418A Rocket Engine Test Bracket 3 T AR E Setup Set up the equipment 1. Remove the hook from the end of the Force Sensor. Use a small screwdriver to connect the Rocket Engine Test Bracket to the Force Sensor in place of the hook (Figure 1). 2. Mount the Force Sensor on the support rod in one of...
Rocket Engine Test Bracket 012-06418A 4 Figure 5 Graph of typical experimental results of a test of an Estes C6-3 model rocket engine Limited Warranty PASCO scientific warrants the product to be free from defects in materials and workmanship for a period of one year from the date of shipment to the ...
