PASCO CI-6512 - Manual
PASCO CI-6512 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Instruction Sheet
for the PASCO
Model CI-6512
RLC Circuit
012-04818D
03/99
$1.00
© 1992 PASCO scientific
This instruction sheet written/edited by: Dave Griffith
330
µ
F
100
µ
F
10
Ω
33
Ω
100
Ω
150
Ω
Model CI-6512
R L C
C IRCUIT
MAXIMUM WORKING
VOLTAGE: 10V
7.5V
0.22A
#50
BULB
8.2 mH
KIT NO.
Inductor
Steel Rod
Resistors
Capacitors
Bi-Color
LED
Lamp
Introduction
The R L C Circuit board is designed to be used with a
PASCO ScienceWorkshop 700 Series Computer
Interface or 6500 Series Computer Interface to study
the behavior of resistors, inductors and capacitors in an
AC circuit. The board includes several resistors, two
capacitors, a #50 miniature screw lamp, a bi-color light
emitting diode and an air-core inductor. A
5
/
8
" X 2
1
/
2
"
steel rod (included) can be used to increase the induc-
tance of the coil.
➤
Note: Prior to the first use, remove the bolt that
secures the coil ( Inductor ) during shipping.
Additional Equipment Required:
• ScienceWorkshop 700 Series Computer Interface
or 6500 Series Computer Interface
• Power Amplifier, (CI-6502, CI-6552)
• Banana Plug Patch Cords, PASCO Model SE-9750
or SE-9751.
➤
Note: The RLC circuit can be used with the
built-in power amplifier of the Science Workshop
750 Interface and does not require the external
Power Amplifier ( CI-6552A ) for most
experiments.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
